Altair Power RC Electric Monster Truck

Introducing The Altair Power RC Electric Monster Truck is a high-performance remote control vehicle designed for off-road adventures. With its powerful motor, durable construction, and impressive speed, this monster truck is perfect for both kids and adults who love the thrill of racing. The estimated price of the Altair Power RC Electric Monster Truck is around $200, and it's now available for purchase.

What's Included

Everything included with the Power Pro & Dual Battery Expansion Upgrade

1 x Power Pro Truck Body
1 x Charging Cable
1 x 7.4v 1600 mAH Battery
1 x 2.4 GHz Transmitter
1 x Hex Wrench
6 x Locking Pins
1 x User Manual

Dual Battery Expansion Upgrade Includes

1 x Velcro Strap
1 x Extra 7.4v 1600 mAH Battery
1 x Extra Charging Cable
1 x Battery Adapter

Spare Parts

Detailed Specifications

The Altair Power RC Electric Monster Truck boasts some impressive features, including a 550 brushed motor, 4WD system, and a 7.4V 1500mAh rechargeable battery. The truck has a top speed of 30 mph and a control range of up to 300 feet. Its heavy-duty tires and aluminum suspension make it perfect for off-road terrain. The truck also features a 2.4Ghz radio transmitter for a more stable and responsive driving experience.

IMPORTANT! READ BEFORE BEGINNING

ALWAYS drive your truck on a flat surface to set the motors when you first turn on the truck.
NEVER leave your battery inside the truck when not in use. Doing so will damage the battery. ALWAYS remove the battery from the truck after use.
ALWAYS check the tires and tire locknuts before each run. Tighten them securely before driving your RC truck.

Safety Tips

Keep small parts out of reach of children.
This vehicle is best operated in open areas away from radio interference.
Change the transmitter batteries when the transmitter power is low.
Store the vehicle and transmitter in a dry, cool environment.
Keep the vehicle away from fire, excessive heat, or humidity.
If the vehicle battery gets wet, dry it immediately to avoid damage.

Quick Start Guide

Remove the truck shell.
Insert the batteries into the truck and transmitter.
Replace the truck shell.
Check wheels and locknuts for tightness. Secure if loose.
Power on the truck.
Power on the remote control transmitter.
Start driving on a flat surface.

For more detailed instructions, read through the entire direction manual prior to use.

Description

The Altair Power RC Electric Monster Truck is a high-quality remote control vehicle designed to provide an exhilarating driving experience. Its powerful motor and 4WD system make it perfect for off-road adventures, while its durable construction ensures that it can withstand even the toughest terrain. Whether you're a seasoned RC enthusiast or new to the hobby, the Altair Power RC Electric Monster Truck is sure to provide hours of fun and excitement.

Installing the Transmitter Batteries

Remove the transmitter battery cover as shown in Figure 1.
Install three AA batteries (not included) according to the polarities shown in Figure 2.
Replace the transmitter battery cover as shown in Figure 3.

Removing the Truck Body

IMPORTANT: Make sure all of the accessories are properly attached and remove the protection film from the truck shell before turning on the truck.

Pull out the four lock pins to remove the truck shell from the body of the truck.

Charging & Installing the Battery

Connect the truck battery to the truck using the connection wire shown in the image below.
Tuck the battery cable and connection wires into the small cavity to assure that your battery will lay flat.
Once all cables are tucked away, the battery should lay flat in the battery slot shown below.
Replace the battery cover and truck shell after the battery is properly connected.

NOTE: If you have the Power Pro Dual Battery Expansion Upgrade, here is how to install your battery:

With the truck shell and truck battery cover removed, connect the adapter wire to the connection wire in the truck.
NOTE: Store the battery cover somewhere safe for future use as you will not need it with the Dual Battery Expansion upgrade.
Use the Velcro strap to securely tighten the battery and cables into the battery cavity.
Replace the truck shell after the batteries are connected.

Charging the Battery & Circuit Board Precautions

You will want to fully charge your battery before placing it in the truck. You will need a USB port to charge your battery.

USB Indicator Guide

WARNING: The battery pack can become damaged or explode if charged too long. The charger uses a voltage limit protected device to prevent this, but avoid charging your battery for more than 24 continuous hours.
When the battery enters low voltage mode, your truck battery is low and the truck will not have as much power. It will need to be recharged. The vehicle should be turned off, and the truck battery should be removed before you begin charging it.
The vehicle's circuit board uses an overheating protection function. If it becomes too hot, the car will be disabled for 3-6 seconds before functionality is restored.

NOTE: You may notice the truck overheats unexpectedly. Wait a few seconds to let the battery and motor cool before driving again.

Transmitter Instructions

Transmitter Buttons

A. Power Switch
B. Steering Trim
C. Steering Dual Rate Adjustment
D. Steering Reverse Switch
E. Speed Mode - Full Speed & Half Speed

How to Turn on & Pair the Transmitter

Before the vehicle is turned on, turn on the transmitter by pressing the power button. A red LED light will begin flashing.
Once the controller has successfully paired with the vehicle, the red and blue lights will both stop flashing and hold solid.
If the blue LED light is flashing, the transmitter's batteries need to be replaced.

Using the Transmitter

Throttle Functions

Forward
Reverse
Brake

Wheel Functions: 4. Turn Right 5. Turn Left

Altair Power RC Electric Monster Truck Setup Guide

Setting up the Altair Power RC Electric Monster Truck is a straightforward process. First, charge the battery fully before use. Next, install the batteries in the remote control transmitter. Turn on the truck and the transmitter, and then adjust the trim buttons to ensure that the truck is properly aligned. Finally, you're ready to hit the road and start driving!

Transmitter Switch Instructions

A. Power Switch

Turn the vehicle and transmitter on within three seconds of each other to perform signal connection. Be sure to turn the transmitter on first.
The blue and red LED lights on the transmitter and the LED light on the car will stop flashing and hold solid once the connection has been completed.

B. Steering Trim

If the vehicle has been turned on and the front tires are not straight, use the ST.TRIM knob (B) to adjust the position.
NOTE: For best results, adjust the trim function while the car is stopped.
Turn the knob clockwise if the car oversteers to the left.
Turn the knob counter-clockwise if the car oversteers to the right.

C. Steering Dual Rate Adjustment

The ST.D/R knob can adjust the dual rate, or the degree of travel that occurs when you turn right or left.
Turn the knob clockwise to increase the dual rate.
Turn the knob counter-clockwise to reduce the dual rate.

D. Steering Reverse Switch

Left Switch Set to NOR:
1. Turning the steering wheel clockwise will cause the truck to turn right.
2. Turning it counter-clockwise will cause the truck to turn left.
Left Switch Set to REV:
1. Turning the steering wheel clockwise will cause the truck to turn left.
2. Turning it counter-clockwise will cause the truck to turn right.

E. Speed Mode - Full Speed & Half Speed

Set the right switch to H to enter full-speed mode.
Set the right switch to L to enter half-speed mode.
It's recommended to drive in half-speed mode when using the Power Pro for the first time to avoid damaging the truck.

NOTE: Factory speed mode settings should be set to half-speed mode. When you feel experienced enough to begin driving faster, you may enter full speed mode.

Operating the Power Pro 4x4

When you're ready to drive the Power Pro,
ALWAYS turn on the transmitter before turning on the vehicle.
When you're finished, ALWAYS turn the Power Pro off first before turning off the transmitter.
ALWAYS operate your vehicle in an open area. Using the vehicle indoors or on a slippery surface may cause a crash.
WARNING: The Power Pro is not waterproof. If water gets into the body of the truck and causes any form of damage, the manufacturer and seller will not be responsible for the damage. Customers assume full responsibility for repair or replacement of damaged parts.
ALWAYS begin driving the Power Pro at a lower speed, or the vehicle may slip.
NEVER operate the vehicle at maximum speed. Doing so may cause damage to yourself or to the vehicle.

IMPORTANT

Set the motor brushes by driving smoothly on a flat surface the first time you use the vehicle. If you don't do this, the motor performance and functional lifespan of the vehicle may be reduced.
Avoid sharp turns, sudden starts and stops, pushing objects, driving in water or tall grass, or driving continuously uphill. Doing this can cause the motor to overheat, reducing the vehicle's functional lifespan.

Troubleshooting

Problem	Possible Cause	Solution
Vehicle runs out of power quickly	The battery has not been properly charged The battery has been damaged The motor is dirty or the brushes are worn	Check, change, or charge the battery Check, clean, or replace the motor
Vehicle moves slower than expected	The motor is dirty or the brushes are worn There is a knot in the drivetrain The vehicle battery needs to be charged	Check, clean, or replace the motor Clean or adjust the drivetrain Replace or recharge the vehicle battery
Transmitter range is less than expected	The transmitter batteries are low The receiver antenna has been damaged	Replace or recharge the transmitter batteries Check, repair, or replace the receiver antenna
Signal Connection Fails	The transmitter and the receiver are too close to each other The transmitter and the receiver are too close to large metal objects, causing interference The vehicle has accidentally been put in signal connection mode	-Move the transmitter 8-12 feet away from the vehicle Move away from large metal objects Reconnect transmitter and vehicle
The transmitter stops responding during operation	The transmitter batteries are low	Charge or replace the transmitter batteries
The transmitter loses its connection to the vehicle	The transmitter has accidentally been put in signal connection mode, ending its connection to the vehicle	Reconnect the transmitter and the vehicle

Pros & Cons

Pros

Powerful motor and 4WD system provide excellent off-road performance
Durable construction ensures that the truck can withstand rough terrain
Easy to set up and use
Affordable price compared to other monster trucks in its class

Cons

The top speed of 30 mph may not be fast enough for some users
The truck may struggle on very steep inclines

Customer Reviews

Customers who have purchased the Altair Power RC Electric Monster Truck have praised its excellent off-road performance and durable construction. Many have noted that the truck is easy to set up and use, making it a great choice for beginners. Some users have reported issues with the truck's battery life, but overall, the feedback has been overwhelmingly positive.

Most Common Complaints

The most common complaint about the Altair Power RC Electric Monster Truck is its battery life. Some users have reported that the battery only lasts for 15-20 minutes of driving time, which can be frustrating for those who want to use the truck for extended periods. However, this is a common issue with RC vehicles, and replacing the battery with a higher-capacity one can help resolve the issue.

Search Manuals in: altair

Read More