Introduction of Mastech Wind Speed Anemometer MS6252B

Mastech Wind Speed Anemometer MS6252B is a high-precision instrument designed to measure wind speed and temperature. This device is an ideal tool for meteorologists, weather enthusiasts, and HVAC professionals who need to monitor wind speed and temperature in their daily tasks. With an expected launch date in early March and an estimated price of around $100, this anemometer is a great value for its features and capabilities.

ATTACHMENTS

Item	Description	Quantity
(1) Battery	9V, NEDA 1604, 6F22	1 pc
(2) Detector Bracket	Optional
(3) Packaging Bag	1 pc	1 pc
(4) Operation Manual	1 pc	1 pc
(5) CD	1 pc	1 pc

Technique data

Ambient temperature: 2 3±5° C,
Relative humidity: <7 5%

m/s

Measuring Range	Resolution	Accuracy
0.80 ~ 30.00 m/s	0.01 m/s	±(2.0% reading + 50 characters)
30.00 ~ 40.00 m/s	0.01 m/s	For reference only

km/h

Measuring Range	Resolution	Accuracy
1.40 ~ 108.00 km/h	0.01 km/h	±(2.0% reading + 50 characters)
108.0 ~ 144.0 km/h	0.01 km/h	For reference only

ft/s

Measuring Range	Resolution	Accuracy
1.30 ~ 98.50 ft/s	0.01 ft/s	±(2.0% reading + 50 characters)
98.50 ~ 131.20 ft/s	0.01 ft/s	For reference only

knots

Measuring Range	Resolution	Accuracy
0.80 ~ 58.30 knots	0.01 knots	±(2.0% reading + 50 characters)
58.30 ~ 77.70 knots	0.01 knots	For reference only

mile/h

Measuring Range	Resolution	Accuracy
0.90 ~ 67.20 mile/h	0.01 mile/h	±(2.0% reading + 5 characters)
67.20 ~ 90.00 mile/h	0.01 mile/h	For reference only

ft/m

Measuring range	Resolution	Accuracy
78 ~ 5900 ft/m	1 ft/m	±(2.0% reading + 5 characters)
5900 ~ 7874 ft/m	1 ft/m	For reference only

Air volume unit

Measuring range	Accuracy
CFM	0- 99990 (Area) 0 - 9.999 ft²
CMM	0- 99990 (Area) 0 - 9.999 m²
CMS	0- 9999 (Area) 0 - 9.999 m²

Ambient temperature, dew point temperature, wet bulb temperature

Measuring range	Resolution	Accuracy
-10°C ~ 60°C	0.1 °C	±1.5 °C
14°F ~ +140°F	0.1 °F	±2.7 °F

Relative humidity

Measuring range	Resolution	Accuracy
(20 ~ 80)%RH	0.1 %RH	±3%RH@25°C
(<20 or >80)%RH	0.1 %RH	±5%RH@25°C

SPECIFICATION

The meter should be recalibrated under the condition of 18°C~28°C, relative humidity <75% every year.

General

Work height: Maximum 2000m
Work mode: Frequency of wind speed conversion
Display: LCD
Maximum show value: 9999
Sampling time: About 0.4s/time.
Low battery indicator: sign displays on LCD.
Work power: 1×9V 6F22 battery.
Operation environment: Relative humidity– 0~95%RH, no moisture condensation. Temperature–-20°C~80°C,, no moisture condensation
Detector (fan) operation environment: Relative humidity– 0~95%RH, no moisture condensation. Temperature–-20°C~80°C, no moisture condensation.
Storage environment: Relative humidity– 0~80%RH, no moisture condensation Temperature–-10°C~50°C, no moisture condensation
Dimension: Meter –165L x 85W x 38H mm.
Weight: About 200g

Description

This meter is a digital anemometer for measuring the ambient temperature, humidity, dew point temperature, wet bulb temperature, wind speed, and air volume. This meter is a portable, professional measuring instrument with large-screen LCD and backlight, multi-unit switching functions.

This meter can be used for hand-held or fixed measurement.
This meter has the functions of reading hold, maximum, minimum, etc.
It has a low battery indicator and USB real-time data uploading functions.

Part Name

Fan
LCD
“FUN” — Function switching button
Power switch
“UNIT” — Unit switching button
Maximum/Minimum button
“HOLD/MODE” hold display, switch temperature mode
“ /USB” — Backlight/USB real-time data uploading functions
Fan retaining bolt hole
Connection hole for fixing measurement bracket
Battery housing cover retaining bolt hole
Battery cover

FRONT PANEL

BACK PANEL

Button Description

Power Button: Switch for meter powering on/off.
/USB button: Switch for turning on/off the backlight and USB transmission.
HOLD/MODE button: Switch for reading retention and temperature mode.
FUN button: It is used for switching among the functions of wind speed measurement, area setting, and air volume measurement. Long press for three seconds to enable or disable "Auto Power-Off" function.
MAX/MIN button: Switch maximum/minimum/normal mode, long press to exit.
UNIT button: Switch unit, area (m², ft²), long press to switch (°C, °F) Wind speed (m/s, km/h, mil/h, ft/m, ft/s, knots), Air volume (CMS, CMM, CFM).

Sign Definition

Indicates Auto Power-Off status
H Reading hold state
VEL Wind speed measurement state
FLOW Air volume measurement state
AREA Area setting required by air volume
DP Indicates that the current mode is dew point temperature mode
WB Indicates that the current mode is wet bulb temperature mode
°C, °F Temperature unit
%RH Relative humidity sign
USB Indicates that USB real-time data uploading is enabled
MAX Displays maximum after entering maximum/minimum mode
MIN Displays minimum after entering maximum/minimum mode
m² Indicates that the current area setting unit is square meter
ft² Indicates that the current area setting unit is square foot
CMM Cubic meters per minute
CMS Cubic meters per second
CFM Cubic meters per minute
knots Nautical miles per hour, 1850 meters per hour
ft/s Feet per second
ft/m Feet per minute
m/s Meters per second
Km/h Kilometers per hour
mil/h Nautical miles per hour
Low battery indicator

OPERATING GUIDANCE

Power On/Off
Press the"POWER" key to turn on or off the anemometer power.
Reading hold
In the measurement process, if the reading should be kept, press "HOLD" key to lock the reading, and display the HOLD symbol; press it again to unlock.
Note: In the reading hold state, "FUN", "MAX/MIN" and "UNIT" keys are invalid.
Backlight
In the measurement process, if the ambient light is too dark to read, you can press"" key to open the backlight. Backlight timer is set to 15 seconds. During this period, you can press"-:+:-" key again to turn off backlight at any time.
Note
1. The luminous body of backlight is LED with large operating current. Frequently using backlight will shorten battery life. Do not use backlight when unnecessary.
2. When the battery voltage::; 7V, the" " (low battery) symbol will show on the display. However, in the case of using the backlight, if the battery voltage 7V, the battery voltage drops because of its larger operating current, "" symbol may show (when "" symbol is showing, the accuracy of the measurement can't be guaranteed). At this moment, you needn't replace battery until the"" symbol display again under normal use condition without using backlight.
Wind speed measurement
Place the detector (fan) into the test environment, "VEL" symbol will display on the screen, measurement is done with the fan surface perpendicularly to the wind direction.
Note
- If the detector (fan) is not aiming at the wind direction, which will bring the measurement error.
- For steady wind, the detector (fan) will get maximum reading when it is aiming at the wind direction.
Wind speed measurement
When using the meter to measure air volume, you can press "UNIT" key to select the measurement unit you required (m/s, km/h, mill/h, ft/m, ft/s, knots).
Area setting
- To measure air volume, you should first determine the area of air flue to be, area input steps are shown as following:
- Press "FUN" key to make "AREA" display on the screen.
- Use the "MAX/MIN" and "UNIT" keys to adjust value and unit, after adjusting area unit (m2 , ft2 ), then press "MAX/MIN" key. There should be an audible buzz, indicating that area input is completed and settings are saved.
- To change the area setting, please repeat the step
Air volume measurement
Place the detector (fan) into the test environment. Use the "FUN" key to set the meter to the Air volume measurement mode; the "FLOW" symbol should display on the screen.
Measurement is done with the fan surface perpendicular to the wind direction.
Note
1. If the detector (fan) is not aligned in the wind direction, the measurement can be skewed.
2. For steady wind, the detector (fan) will get maximum reading when it is aiming at the wind direction.
Air volume unit selection
When using the meter to measure air volume, you can press the "UNIT" key to select the measurement unit your required (CMS, CMM, CFM).
Temperature unit selection
Long press the "UNIT" key for 3 seconds to switch temperature unit (° C, °F).
Temperature mode selection
Long press the "HOLD/MODE" key for 3 seconds to switch temperature mode (ambient temperature, dew point temperature and wet bulb temperature).
USB real time data uploading
Long press the " USB" key for 3 seconds to enable or disable USB real time data uploading function.
Detailed steps are shown as follows:
1. Use CD to install the PC software and the USB drivers.
2. Power on the meter and connect it to a computer with USB cable.
3. Launch the PC software.
4. Long press the"/ USB" key for 3 seconds to enable the USB function of the meter.
5. The PC software displays data and diagrams.
6. Save or print data.
Using tripod connection receptacle
1. When necessary, the meter can be fixed on a tripod.
2. When necessary, the meter can be used by hang.
Replacing battery
1. If the “”sign appears, this indicates that the battery should be replaced.
2. Power off the meter and remove the battery cover.
3. Replace the old battery.
4. Install the battery cover properly.

Mastech Wind Speed Anemometer MS6252B Setup Guide

To operate the Mastech Wind Speed Anemometer MS6252B, follow these steps:

Turn on the device by sliding the power switch to the "ON" position.
Select the desired measurement unit for wind speed and temperature by pressing the "MODE" button.
Hold the device with the sensor pointing into the wind.
The device will automatically measure the wind speed and temperature and display the results on the digital display.

SAFETY INFORMATION

Please read carefully the following safety information before usage and maintain this anemometer while using it according to operating guidance, otherwise, the anemometer may be damaged. The anemometer will provide satisfactory services to you if you use and protect it appropriately.

Preparation

Please check for damage during transportation after receiving the anemometer.
If it should be stored and shipped under hard conditions, please confirm that whether the meter is damaged.

Usage

The meter should be used in the range of specified ambient temperature and humidity.
If you notice any abnormality or failure, it should stop using.
Don't store or use the meter under the conditions of direct sunlight, high temperature, and high humidity.
Don't touch the fan blades with excessive force.
Don't directly expose the blades in the hard light to avoid reading error.

Maintenance

Repair or maintenance should be implemented by trained personnel.
If there is dust on the fan blade, please blow it with clean air or scrub gently with a damp cloth and mild detergent.
Clean the meter with a damp cloth and mild detergent. Don't use abrasive material or solvent.
The meter should be powered off when it is not in use.
The meter will consume small current, about 5µA, after shutdown. If the meter is not to be used for a long period, batteries should be removed to prevent damaging the meter.

Troubleshooting

If the device is not measuring wind speed or temperature correctly, try the following solutions:

Ensure that the sensor is pointing into the wind.
Replace the batteries if the low battery indicator is displayed.
Calibrate the device using a known wind speed or temperature source.
Check for any physical damage to the device or sensor.

Pros & Cons

Pros

High precision and accuracy
Easy to use and operate
Digital display for easy reading
Data hold function and memory for maximum and minimum values
Low battery indicator

Cons

Handheld design may not be suitable for all applications
May not be as durable as other anemometers in its price range

Customer Reviews about Mastech Wind Speed Anemometer MS6252B

Customers have praised the Mastech Wind Speed Anemometer MS6252B for its accuracy and ease of use. However, some have noted that the device may not be as durable as other anemometers in its price range. Overall, the device has received positive reviews and is a great value for its features and capabilities.

Search Manuals in: anemometer

Read More