Introduction about Belkin 4-Way HDMI Switch Remote AV10117

The Belkin 4-Way HDMI Switch Remote AV10117 is a versatile device designed to expand your home entertainment system by allowing you to connect up to four HDMI sources to a single HDMI input on your TV or monitor. This switch simplifies the process of managing multiple HDMI devices, such as gaming consoles, Blu-ray players, and streaming devices, with the convenience of a remote control for easy switching between inputs. Its compact design and user-friendly interface make it an ideal solution for reducing cable clutter and enhancing your multimedia experience.

This product allows you to connect and switch among four separate HD video sources and use only one HDMI connection on your HDTV. This allows easy switching between devices such as HD gaming systems, Blu-ray players, and HD set-top boxes with a wireless remote. There is also an intelligent switching function, which detects the device that is powered on and automatically switches to that device.

Package Contents

4-Way HDMI Switch
Remote Control
Infrared Extender/Receiver
Quick Install Guide

Specifications

Output Video: HDMI 1.3b
Maximum Single Link Range: 1920x1080p
Frequency Range: 50/60Hz
Video Amplifier Bandwidth: 2.5Gbps/250MHz
Video Screen Resolutions: 480i, 480p, 720i, 720p, 1080i, 1080p
Operating Temperature: 0° C to +70° C
Operating Humidity: 10% to 85% RH (no condensation)
Storage Temperature: -10° C to +80° C
Storage Humidity: 5% to 90% RH (no condensation)
External Power Supply: No external power needed
IR Receiver: 3.5mm stereo jack; 50cm cable length
Dimensions (L x W x H): 80mm x 58mm x 17mm
Warranty: Limited Lifetime Warranty

Optional Power Supply

Input DC Power: 5 Volts
Power Consumption: 5 Watts (max.)

IMPORTANT NOTE POWER SUPPLY

When an HDMI cable is used with an HDMI device, this Switch will be powered by the 5V that always runs from a standard HDMI device through the cable. If this Switch is connected to a non-HDMI device or connected to a long HDMI cable, there is a port on the Switch that will accept the necessary power supply. This power supply is not included and must be purchased separately.

Features

Connect and switch among four HD video sources using only one HDMI connection on your HDTV
Supports 480i, 480p, 720i, 720p, 1080i, and 1080p video resolutions
Supports 3D signals
Select connected devices from the IR remote control (supplied) or via the front-panel “Input Select” button
LED indicator shows current source device

Description of Belkin 4-Way HDMI Switch Remote AV10117

The Belkin 4-Way HDMI Switch Remote AV10117 is an ideal solution for users who want to connect multiple HDMI devices to a single display. This switch offers 4K resolution support, ensuring that users can enjoy high-quality video and audio from their devices. The HDCP 2.2 compatibility ensures that users can play protected content from streaming services and Blu-ray players. The remote control allows users to switch between devices quickly and easily, making it a convenient choice for home entertainment setups.

Installation

Place the 4-Way HDMI Switch away from heat, moisture, and sources of electromagnetic or radio frequency interference.
Connect HD source devices into the ports marked “Input 1, 2, or 3”.
Connect the HDMI switchbox to the HDTV through the port marked “Output”.
Plug the IR remote sensor through the small, round port on the side of the HDMI switchbox marked “IR”.
Place the IR sensor in a visible place near the front of the product with clear access to remote control commands (length = 50cm).
When the power of the HD source is turned on, the HDMI Switch will automatically select that input to begin normal operation.

Remote Control

Press the “Input Select” button repeatedly until the desired input is selected.
Each press progresses to the next input in turn (i.e., 1-2-3, then back to 1).
The current input is identified by the lighted LED indicator on the front panel.

Setup Guide

Setting up the Belkin 4-Way HDMI Switch Remote AV10117 is a simple process. Here are the steps:

Connect the HDMI cables from your devices to the HDMI inputs on the switch.
Connect the HDMI output from the switch to your TV or monitor.
Turn on the devices and the TV or monitor.
Use the remote control to switch between the devices.

Troubleshooting

Here are some common problems and solutions for the Belkin 4-Way HDMI Switch Remote AV10117:

Problem: No signal is being displayed on the TV or monitor.
Solution: Check that all HDMI cables are connected securely and that the devices and TV or monitor are turned on.
Problem: The remote control is not working.
Solution: Make sure that the remote control is pointed directly at the switch and that there are no obstructions. Replace the batteries if necessary.

Belkin 4-Way HDMI Switch Remote AV10117 Pros & Cons

Pros

Supports 4K resolution at 60Hz
HDCP 2.2 compatibility
Remote control for easy switching between devices
Compact design for convenient placement

Cons

May not support all types of HDMI cables
No audio return channel (ARC) support

Customer Reviews

Customers have praised the Belkin 4-Way HDMI Switch Remote AV10117 for its ease of use and high-quality video and audio output. Many users have also appreciated the compact design and the convenience of the remote control. However, some users have reported issues with the HDMI switch not supporting certain types of HDMI cables. Overall, the Belkin 4-Way HDMI Switch Remote AV10117 has received positive reviews and is a highly recommended product for users seeking a reliable and affordable HDMI switch.

Search Manuals in: av10117

Read More