Introduction

The Black+Decker 20V MAX Leaf Blower BCBL700 is a powerful and lightweight cordless tool designed for efficient yard cleanup. Launched in 2020, this blower is manufactured by Black+Decker, a trusted name in home improvement products. Priced at approximately $99, the BCBL700 features a maximum air speed of 90 MPH and an airflow of up to 320 CFM, making it ideal for clearing leaves and debris from various surfaces with ease and convenience.

Accessories

WARNING: Since accessories, other than those offered by BLACK+DECKER, have not been tested with this product, use of such accessories with this tool could be hazardous. To reduce the risk of injury, only BLACK+DECKER recommended accessories should be used with this product.

Repairs
The charger and battery pack are not serviceable. There are no serviceable parts inside the charger or battery pack.

COMPONENTS

(FIG. A)

On / Off Switch
Blower Tube Lock Tabs
Blower Tube
Power Head Handle

WARNING! Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury.
WARNING: To reduce the risk of injury, read the instruction manual.

Intended Use
This cordless handheld blower is designed for household blowing applications.

DO NOT use under wet conditions or in presence of flammable liquids or gases.
DO NOT let children come into contact with the tool. Supervision is required when inexperienced operators use this tool.

Symbols

The label on your tool may include the following symbols. The symbols and their definitions are as follows:

V.......................... volts
Hz........................ hertz
min...................... minutes
DC....... direct current
....................... Class I Construction (grounded)
…/min............... per minute
BPM..................... beats per minute
IPM...................... impacts per minute
RPM..................... revolutions per minute
sfpm.................... surface feet per minute
SPM..................... strokes per minute
OPM..................... oscillations per minute
A.......................... amperes
W......................... watts
or AC............ alternating current
or AC/DC..... alternating or direct current
....................... Class II Construction (double insulated)
no........................ no load speed
n.......................... rated speed
....................... earthing terminal
...................... safety alert symbol
...................... visible radiation
...................... avoid staring at light
...................... wear respiratory protection
...................... wear eye protection
...................... wear hearing protection
...................... read all documentation
IPXX..................... IP symbol

Specifications

Power Source: 20V MAX Lithium-Ion Battery
Air Speed: Up to 130 MPH
Air Flow: Up to 100 CFM
Weight: Approximately 3.9 lbs
Battery Life: Variable depending on usage; typically around 20-30 minutes per charge
Charging Time: About 4 hours for a full charge
Ergonomic Design: Comfort grip handle and adjustable speed setting
Additional Features: Compact design, easy-to-use interface, and durable construction

Description

The Black+Decker 20V MAX Leaf Blower BCBL700 features a sleek and ergonomic design that fits comfortably in your hand. The tool is powered by a 20V MAX lithium-ion battery, which provides consistent performance and long battery life. With an air speed of up to 130 MPH and air flow of up to 100 CFM, this blower can handle a variety of tasks from light leaf cleanup to more heavy-duty debris removal.

The adjustable speed setting allows you to customize the blower's power based on the task at hand, ensuring efficient battery use and optimal performance. The compact design makes it easy to store in small spaces, and the lightweight construction reduces user fatigue during extended use.

ASSEMBLY AND ADJUSTMENTS

WARNING: To reduce the risk of serious personal injury, turn unit off and remove the battery pack before making any adjustments or removing/installing attachments or accessories. An accidental start-up can cause injury.
CAUTION: Ensure the battery is removed before removing extension attachment or end attachment. An attachment must be attached to the housing before use.

Blow Tube Assembly

(Fig. B, C)

To attach the blower tube 3 to the power head, line up the peg 5 on the bottom of the power head with the notch 6 on the bottom of the blower tube opening as shown in Fig. B.
Push the blower tube onto the power head until the tube locks 2 engage the blower tube and an audible click is heard.
Pull on the tube to ensure it is securely in place.
To remove the tube, press in and the two tube locks 2 and pull tube off as shown in Fig. C.

WARNING: Do not operate blower without tube securely in place. Never reach down into housing through tube hole.
WARNING: Always remove the battery when you leave blower unattended or when storing, checking, adjusting, cleaning, or working on blower.

Installing and Removing the Battery Pack

(Fig. D)

NOTE: For best results, make sure your battery pack is fully charged.

To install the battery pack 7 into the tool handle, align the battery pack with the rails inside the tool’s handle and slide it into the handle until the battery pack is firmly seated in the tool and ensure that it does not disengage.
To remove the battery pack from the tool, press the release button 8 and firmly pull the battery pack out of the tool handle. Insert it into the charger as described in the charger section of this manual.

Proper Hand Position

(Fig.E)

WARNING: To reduce the risk of serious personal injury, ALWAYS use proper hand position as shown.
WARNING: To reduce the risk of serious personal injury, ALWAYS hold securely in anticipation of a sudden reaction.

Hold the blower with one hand on the main handle 4

OPERATION

WARNING: Do not operate blower without blow tube securely in place. Never reach down into housing through tube hole.
WARNING: Always wear safety glasses. Wear a filter mask if the operation is dusty. Use of rubber gloves and substantial footwear is recommended when working outdoors. Keep long hair and loose clothing away from openings and moving parts. FOR HOUSEHOLD USE ONLY.
WARNING: Cut Hazard. When turning the tool off, wait 10 seconds for the fan to stop rotating before removing the blower tube.

Always ensure the blower is switched OFF and the battery is removed when:
- You leave blower unattended.
- Clearing a blockage.
- Checking, adjusting, cleaning or working on blower.
Only use blower in daylight or good artificial light.

Switching ON/OFF

(Fig. F)

WARNING: Use both hands to grip the product firmly when switching on.

CAUTION: Do not point unit discharge at self or bystanders.
Your blower is fitted with a 2 speed ON/OFF switch located on the top of the power head handle 5 .

To switch the blower ON, slide the ON/OFF 1 switch forward to position 1 as shown in Fig. L.
To operate blower in high speed, slide the ON/OFF 1 switch forward to position 2 as shown in Fig. L.
To switch the blower off, slide the ON/OFF 1 switch back as shown in Fig. F.

How to Use Black+Decker

(Fig. G)

use_black+decker_20v_max_leaf_blower_bcbl700.png

CAUTION: Do not point unit discharge at self or bystanders.
CAUTION: Always wear safety glasses and hearing protection. Wear a filter mask if the operation is dusty. Use of gloves, long pants and substantial footwear is recommended. Keep long hair and loose clothing away from openings and moving parts.

Install the battery pack 7 into the tool handle.
Hold the blow tube approximately 7 inches (180 mm) above the ground, turn the blower ON and using a sweeping motion from side to side, advance slowly keeping the accumulated debris/leaves in front of you as shown in Fig. G.
Fig. G

Setup Guide

To operate the Black+Decker 20V MAX Leaf Blower BCBL700,

Start by charging the included 20V MAX lithium-ion battery using the provided charger.
Once charged, insert the battery into the blower's battery slot until it clicks into place.
Adjust the speed setting according to your needs using the trigger located on the handle.

For assembly

Simply attach any additional accessories such as the blow tube or nozzle if provided.

To configure

Ensure all parts are securely attached before use.
There is no pairing required as this is a straightforward cordless tool; simply insert the battery and start using it.

MAINTENANCE

Cleaning

WARNING: Blow dirt and dust out of all air vents with clean, dry air at least once a week. To minimize the risk of eye injury, always wear ANSI Z87.1 approved eye protection when performing this.
WARNING: Never use solvents or other harsh chemicals for cleaning the non-metallic parts of the tool. These chemicals may weaken the plastic materials used in these parts. Use a cloth dampened only with water and mild soap. Never let any liquid get inside the tool; never immerse any part of the tool into a liquid.
WARNING: SHOCK HAZARD. DO NOT POUR OR SPRAY WATER ON THE TOOL IN AN ATTEMPT TO CLEAN.

Use only mild soap and a damp cloth to clean the tool. Never let any liquid get inside the tool; never immerse any part of the tool into a liquid.
Do not store the tool on or adjacent to fertilizers or chemicals. Such storage can cause rapid corrosion of the metal parts.

IMPORTANT: To assure product SAFETY and RELIABILITY, repairs, maintenance and adjustment (other than those listed in this manual) should be performed by authorized service centers or other qualified service personnel, always using identical replacement parts.

Troubleshooting

Problem	Possible Cause	Possible Solution
Unit will not start.	Battery not installed properly. Battery not charged.	Check battery installation. Check battery charging requirements.
Battery won’t charge	Battery not inserted intocharger. Charger not plugged in.	Insert battery into charger untilgreen LED appears. Chargeup to 8 hours ifbattery totally drained.
		Plug charger into a working outlet. Refer to Important Charging Notes for more details.
		Check currentat receptacle by plugging in a lamp or other appliance.
		Check to see if receptacle is connected to a lightswitch which turnspower off when you turn out the lights.
	Surrounding air temperature too hot or too cold.	Move charger and tool to a surrounding air temperature of above 40 °F (4.5°C) or below 104 °F (+40 °C).

WARNING: To assure product SAFETY and RELIABILITY, repairs, maintenance and adjustment (including brush inspection and replacement) should be performed by a BLACK+DECKER factory service center or a BLACK+DECKER authorized service center. Always use identical replacement parts.

Register Online

Black+Decker 20V MAX Leaf Blower BCBL700 Pros & Cons

Pros

Affordable price point
Lightweight and ergonomic design
Adjustable speed setting for efficient battery use
Compact storage design
Compatible with other 20V MAX tools and accessories

Cons

Limited battery life for heavy-duty tasks
No variable speed control on lower models
May not be as powerful as gas-powered blowers for large areas
Battery charging time can be lengthy

Customer Reviews

Customers have generally praised the Black+Decker 20V MAX Leaf Blower BCBL700 for its ease of use, lightweight design, and affordability. Many reviewers appreciate its ability to handle small to medium-sized yard tasks efficiently. However, some users have noted that the battery life could be longer and that it may not be suitable for very large areas or heavy-duty tasks.

Common complaints include limited battery life during extended use and occasional issues with clogging if not regularly cleaned.

TWO-YEAR LIMITED WARRANTY

Black & Decker (U.S.) Inc. warranties this product to be free from defects in material or workmanship for a period of two (2) years following the date of purchase, provided that the product is used in a home environment.

Search Manuals in: bcbl700

Read More