Introduction of Kent Crystal VC S1023

We at KENT have always believed that a clean and healthy life is a right of every individual. This ethos made us embark on the journey to develop innovative solutions for cleaning water we drink, fruits & vegetable we eat and the air we breathe. Using innovative technology and supported by a proficient service network, we have been able to create a brand which has become synonymous for well-being and health.

Continuing with the tradition, we now present the KENT Crystal Vacuum Cleaner, with futuristic and state-of-the-art Cyclonic technology and HEPA filters to provide clean, dust-free and spotless surroundings.

In KENT Crystal Vacuum Cleaner the air and dust are sucked at high speed creating a fast-spinning vortex while the dust is separated in a detachable cylindrical collection vessel or bin. The HEPA filter in KENT Crystal Vacuum Cleaner reduces the air pollution in the room with lower dust discharge.

Detailed Specifications

Model Name	KENT Crystal Vacuum Cleaner
Model Number	KVC-S1023
Net Weight	2.95kg
Input Power Supply	Single Phase 220 V, AC 50 Hz. [Bl]
Max. Vacuum Pressure	18kpa
Noise	<86dB [A]
Power Cord Length	5m
Maximum Power	850 W

Features of KENT Crystal Vacuum Cleaner

Advanced Cyclonic Technology (without filtration bags) for dust collection and HEPA [High Efficiency Particulate Arrestance) based discharge filter.
High efficiency motor with strong suction force for efficient cleaning.
High efficiency HEPA filter.
Reduces air pollution due to lower dust and particulate matter (PM) discharge.
Multi functional Vacuum Cleaner.
Compact & handy.
Rubberized wheels.
Lightweight & easy to handle.
Lower noise.

Know Your Product

Assembling Your KENT Crystal Vacuum Cleaner

Unpack the unit and remove any stickers that can prevent unit operation.
Check the unit for damages. Do not use it in case of any damages
Before switching the unit on, make sure that your home’s main voltage corresponds to the unit’s operating voltage.

Description of Kent Crystal VC S1023

The Kent Crystal VC S1023 is a high-performance water purifier that uses a 6-stage purification process to remove impurities, chemicals, and harmful microorganisms from water. The purifier is equipped with RO, UV, and UF technologies, ensuring that the water you drink is free from bacteria, viruses, and other contaminants. The computer-controlled operations and smart energy-saving mode ensure that the purifier is always working efficiently, while the built-in SMPS protects the unit from voltage fluctuations. The food-grade stainless steel tank and body are durable and long-lasting, making this purifier an excellent investment for your home or office.

Attaching/Detaching

Extension tube

Hold the tube by it’s handle and push it inside slowly.
You will hear a ‘Click’ sound indicating that the tube is properly inserted
To detach, gently press the button and pull out slowly.

Connecting handle

Attach the handle to the tube by pushing it. You will hear a ‘Click’ sound indicating that the handle is properly inserted.
To detach, gently press the button and pull out slowly.

Connecting the tube, brush and motor

Insert the upper end of the tube to the body. You will hear a ‘Click’ sound indicating that the tube is properly inserted.
Attach the other end to the brush as shown in the figure.
To detach, gently press the button and pull out slowly.

Connecting the Crevice tool

Insert the crevice tool into the body. You will hear a ‘Click’ sound indicating that the tool is properly inserted.
To detach, gently press the button and pull out slowly.

Connecting the Floor/Carpet Brush to the main body

Attach the brush to the main body as shown in the figure. Insert the
crevice tool into the body. You will hear a ‘Click’ sound indicating that
the brush is properly inserted
To detach, gently press the button and pull out slowly.

Adjustment in Floor/Carpet Brush

Adjust the settings by pressing the adjustment latch located on the carpet brush:

To use the brush on hard floor, extend the brush
For use on carpets or rugs, retract the brush.

Note: Always remove the plug from the power socket before fitting or removing accessories.

Using your KENT Crystal Vacuum Cleaner

To use the appliance, rotate the hook 180” and remove the power cord. Connect the power cord to the corresponding power socket.
Press on/off button to switch on your appliance.
After use, switch the appliance off and unplug the cord, Adjust the hook to the position as shown in picture and wind the cord to the hook. Store in an upright position.

Using the Accessories

The Crevice tool is ideal for cleaning surfacesthat are difficult to clean otherwise, such as radiators, couch corners and cushion edges.
The Hard Brush can be used for cleaning both, hard floors and carpets
Use the appliance in hand-held mode to clean the surfaces of furniture, floors, walls and curtains, etc.

Note: Always remove the plug from the power socket before fitting or removing accessories.

Kent Crystal VC S1023 Setup Guide

To set up the Kent Crystal water purifier, follow these steps:

Unpack the unit and place it on a flat, stable surface.
Connect the inlet pipe to the water source and the outlet pipe to the purifier.
Plug in the power cord and turn on the unit.
Press the power button on the digital display to start the purification process.
Wait for the purifier to fill the tank with clean, purified water.
Dispense water by pressing the faucet button on the front of the unit.

Important Instructions

Do not operate the vacuum cleaner too close to heaters, radiators, cigarette butts, etc.
Do not plug or unplug the device with wet hands.
Before using the vacuum cleaner, remove large or sharp objects from the floor to prevent damage of HEPA filter.
While unplugging, do not pull the electrical cord. Pull out the plug.

Note: If the suction pipe or metal telescopic tube is blocked, switch off the vacuum cleaner at once. Unplug the appliance before clearing the blockage. Once done, you can start the vacuum cleaner again.

Cleaning & Maintenance of Kent Crystal VC S1023

Switch off and unplug the appliance before cleaning it.
Note: Never use gasoline, solvent, abrasive cleaning agents, metal objects or hard brushes to clean the appliance.

Emptying Dust Container

It is necessary to empty the dust container when it is 2/3 filled

To empty the dust container, remove the filters [one by one] as shown in the figure.
Empty the container in a dust bin or trash can.
Reinsert the filter assembly.

Washing and Cleaning of Filters

For trouble-free operations, it is important to clean the filters regularly.

Remove the HEPA & Foam filters (one by one) as shown in the figure.
Clean and wash under running water.
After washing the Foam filter, gently wring it and leave it to dry.
Dry the HEPA filter by placing it either on the table or on the floor.

Storage

If you do not intend to use the appliance for a long time, store it carefully.
Unplug the appliance.
Wind the cord to the hook of the cord and place the crevice tool in the accessory holder.
Place the appliance in an upright position.
Keep the appliance out of the reach of children.

General Safety Instructions

When using an electrical appliance, basic precaution should always be followed, including the following:

Do not leave the vacuum cleaner on when plugged in. Unplug, when not in use and before servicing it.
To reduce risk of electric shock, do not use on wet surfaces.
Use the appliance only as described in the operating instruction manual.
Always use manufactures recommend attachments only.
Do not use the appliance if cord or plug is damaged or worn out. Replace
the damaged cord or plug immediately.
Do not try to service the appliance on your own. Send it to an authorized service center.
Never use the cord as a handle, close a door on the cord, or pull the cord around sharp edges or corners. Keep the cord away from heated surfaces.
Do not unplug the cord by pulling it. Always unplug by pulling out the plug.
To avoid electric shocks, do not use the appliance with wet hands.
Keep hair, loose clothing, fingers and all parts of body away from moving parts.
Turn the appliance off before unplugging.
Use extra precautions while cleaning stairs.
Do not use the appliance to pick any flammable or combustible liquids, such as gasoline. Do not use in areas where they may be present.
Unplug the appliance before connecting any accessories.
Do not pick up anything that is burning or smoking, such as cigarettes, matches, or hot-ash.
Never use the appliance without the filter in place.
If the supply cord is damaged, it must be replaced by the manufacturer, it’s service agent or a similarly qualified person in order to avoid a hazard.
This appliance is suitable for indoor use only.
Keep away from children

Warning: To reduce the risk of electric shock, this vacuum cleaner has a polarized plug [one blade is wider than the other]. This plug will fit in a polarized outlet only one way. If the plug does not fit in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install the plug in the outlet. Do not change the plug in any way.

Kent Crystal VC S1023 Troubleshooting

Problem	Possible Cause	Possible Solutions
The appliance does not switch on.	1. The power cord is not firmly plugged into the socket.	1. Plug in the unit firmly.
	2. There's no power in the main supply.	2. Check the fuse or cutout switch. Replace fuse or reset the switch.
		3. Call authorised service center.
The appliance has weak suction power.	1. The filters are blocked.	1. Switch off the cleaner and disconnect the cleaner from the main power supply.
		2. Remove the filter and clean them.
		3. Clean the remaining dust inside the dust canister and fitter cone.
The hose or brush does not pick any dust.	1. The hose is chocked or there’s some blockage in the brush.	1. Switch off the cleaner and disconnect the cleaner from the main power supply.
		2. Remove the hose and/or brush. Remove any blockage.

Pros & Cons

Pros

Uses RO, UV, and UF technologies for maximum purification
Computer-controlled operations and smart energy-saving mode
Built-in SMPS to prevent voltage fluctuations
Food-grade stainless steel tank and body
Digital display and smart fill technology
Cons
May require regular membrane replacement
Can be heavy and difficult to move once installed
May not be suitable for areas with low water pressure
Can be expensive compared to other water purifiers

Customer Reviews about Kent Crystal VC S1023

Customers who have purchased the Kent Crystal VC S1023 have praised its high-quality purification process, durable construction, and easy-to-use digital display. However, some customers have noted that the unit can be heavy and difficult to move once installed, and may require regular membrane replacement. The smart fill technology and built-in SMPS have also been popular features among customers.

Most Common Complaints

The most common complaints about the Kent Crystal VC S1023 include its high price point, heavy weight, and need for regular membrane replacement. Some customers have also reported issues with water leakage and poor customer service.

Search Manuals in: crystal

Read More