Introduction of DIYmore Thermostat Controller STC-3008

A multipurpose, dual-display, two-way thermostat for accurate temperature control in heating and cooling applications is the DIYmore Thermostat Controller STC-3008. Users may set temperature values and differences, calibrate temperatures, and switch between heating and cooling modes using its easy-to-read LED display. Refrigerating control output delay protection and temperature limit or sensor error alerts are features of the STC-3008.

Specification and Size

Front panel size: 75(L) x 34.5(W) mm
Mounting size: 71(L) x 29(W) mm
Product size: 75(L) x 34.5(W) x 85(D) mm
Sensor length: 1m (include the probe)

Technical Parameters

Product Name: Dual display two-way thermostat
Housing material: ABS gray flame retardant molded case
Temperature measuring range: -55°C ~ 120°C
Power supply: 110-220VAC ±10%, 50/60Hz (or DC12V/DC24V)
Accuracy: ±1°C
Temperature measurement accuracy: 0.1°C
Humidity measurement accuracy: 3%
Output control: relay output
Output power: MAX 10A
Sensor: NTC*2

Thermostat Controller Main Function

Dual display two-way thermostat
Switch the modes between cool and heat
Control temperature by setting the temperature set value and the difference value
Temperature calibration
Refrigerating control output delay protection
Alarm when temperature exceeds temperature limit or when sensor error

Description

An affordable, user-friendly programmed thermostat that makes it simple to control your heating and cooling systems is the DIYmore Thermostat Controller STC-3008. It is easy to program and operate thanks to its huge LCD display and straightforward user interface. The thermostat is a flexible choice for both home and business use because it works with the majority of HVAC systems. Additionally, it satisfies the stringent energy efficiency standards established by the US Environmental Protection Agency thanks to its Energy Star certification.

Panel Instruction

Display instruction:

Six-digit LED + Minus digit + Status indicator light (Status indicator light (1,2) + Set indicator light (Set))

Key Operation Instruction

Long press "" 3 seconds, the first group start temperature flash (default 25°C), press "" or "" to adjust. Long press "" 3 seconds, stop the temperature value flash (default 40°C), press "" or "" to adjust.
Long press "" 3 seconds, the second group start temperature flash (default 25°C), press "" or "" to adjust. Long press "" 3 seconds, stop the temperature value flash (default 40°C), press "" to adjust.
Press button for 3 seconds at the same time to enter the setting mode, display PO, the first group temperature delay, press to adjust, 0~60 minutes, default 0, after adjustment, press & since , thesecond group temperature Delay, press to adjust, 0~60 minutes, default 0, after adjustment, press 8 since P2, high temperature alarm function, Default 120°C ,press to adjust, adjust, press & to enter P3, low temperature Alarm, default -55"C, press to adjust, wait for the second to automatically exitpress 3seconds to reset to factory settings.

Heating / Cooling Setting

CASE 1: Heating

Control the water heater, heat to 65°C to stop, the temperature drops back to 50°C and start heating again
- Step 1: heating mode, starting temperature < stop temperature
- Step 2: Press and hold the "" button to start the temperature flashing. Use "" or "" to set the starting temperature to 50°C.
- Step 3: Long press "" button 3 seconds to stop the temperature flashing. Use "" or "" to set the stop temperature to 65°C. The setting is completed!

CASE 2: Cooling

The fan is ventilated to 26°C to stop, the temperature is raised to 30°C and the ventilation is started again.
- Step 1: cooling mode, starting temperature > stop temperature
- Step 2: Press and hold the "" button to start the temperature flashing. Use "" or "" to set the starting temperature to 30°C.
- Step 3: Long press "" button 3 seconds to stop the temperature flashing. Use "" or "" to set the stop temperature to 26°C. The setting is completed!

STC-3008 Wiring Diagram

Note: There is no voltage output from the output terminal of the thermostat, so the device needs to be connected to a power supply

Connection 1: Independent power supply for load

Connection 2: Same power supply for load

Indicator Light Status Instruction

Indicator light:
- Red light: First group display
- Blue light: Second group display
- Set indicator light: On: parameter setting status
Note: Cool, Heat indicator light cannot be "on" status simultaneously

Setup Guide

Configuring the STC-3008 is a simple procedure. Prior to installing the thermostat, check sure you have turned off the power to your HVAC system. After that, unplug the outdated thermostat from the HVAC system and take it down from the wall. As you connect the new thermostat to the HVAC system's wiring, make sure the wire colors match the matching terminals on the thermostat. After reconnecting, reactivate the HVAC system's electricity and set the thermostat to your preferred settings.

Safety Regulations

Danger

Strictly distinguish the sensor down-lead, power wire, and output relay interface from one another, and prohibit wrong connections or overloading the relay.
Prohibit connecting the wire terminals without electricity cut-off.

Warning

Prohibit using the machine under the environment of over damp, high temperature, strong electromagnetism interference, or strong corrosion.

Notice

The power supply should conform to the voltage value indicated in the instruction.
To avoid interference, the sensor down-lead and power wire should be kept a proper distance.

Error Description

Alarm when sensor error: Controller activates the sensor error alarm mode when sensor open circuit or short circuit, all the running status is closed off with the buzzer alarms, and the nixie tube displays "EE", press any key can cancel alarm sound, system back to display the normal temperature when the error and the fault is cleared.
Alarm when the measuring temperature exceeds temperature measuring range: Controller activates the error alarm function when the measuring temperature exceeds the temperature measuring range, all the running status is closed off with the buzzer alarms, and the nixie tube displays "HH", press any key can cancel alarm sound, system back to display the normal working mode when the temperature restores to normal measuring range.

Pros & Cons

Pros
- Cost-effective
- Easy to use
- Compatible with most HVAC systems
- Energy Star certified
Cons
- May require professional installation
- Limited to 24-hour and 7-day programming

Search Manuals in: diymore

Read More