Introduction

The Tredyhome Air Purifier HEPA Filter TD-1500 is designed to provide a cleaner and healthier indoor environment by effectively removing allergens, dust, and pollutants from the air. Featuring a true HEPA filter, it captures particles as small as 0.3 microns, ensuring high efficiency in air purification. Ideal for homes and offices, the Tredyhome TD-1500 is priced at approximately $149.99. The sleek design fits seamlessly into any room, while its user-friendly controls make operation simple.

Specifications

Power Supply	AC 120V, 60Hz
Rated Power	32W
	200 ft²
CADR	100 CFM
Operating Conditions	Temperature: 14°F–104°F / -10°C–40°C
Operating Conditions	Humidity: < 85% RH
Noise Level	28–52dB
Standby Power	<0.8W
Dimensions	Φ10 x 14 in / Φ215 x 365 cm
Weight	6.4lb / 2.9kg

Package Contents

1 x Air Puriﬁer
1 x True HEPA 4-Stage Filter
1 x User Manual

Safety Information

To reduce the risk of ﬁre, electric shock, or other injury, follow all instructions and safety guidelines.

General Safety

Only use your air puriﬁer as described in this manual.
Do not use without removing the plastic wrap from the ﬁlter. The puriﬁer will not ﬁlter air, and may overheat, causing a ﬁre hazard.
Do not use your air puriﬁer outdoors.
Keep your air puriﬁer away from water, and wet or damp areas. Never place in water or liquid.
Do not use in excessively humid areas.
Keep your air puriﬁer away from heat sources.
Do not use where combustible gases, vapors, metallic dust, aerosol (spray) products, or fumes from industrial oil are present.
Keep 5 ft / 1.5 m away from where oxygen is being administered.
Supervise children when they are near the air puriﬁer.
Do not place anything into any opening on the air puriﬁer.
Do not sit or place heavy objects on the air puriﬁer.
Keep the inside of the air puriﬁer dry. To prevent moisture buildup, avoid placing in rooms with major temperature changes or underneath air conditioners.
Always unplug your air puriﬁer before servicing (such as changing the air ﬁlter).
Do not use your air puriﬁer if it is damaged or not working correctly, or if the cord or plug is damaged. Do not try to repair it yourself. Contact Customer Support (support@tredyhome.com).
WARNING: Do not use this air puriﬁer with solid-state speed controls (such as a dimmer switch).
Not for commercial use. Household use only.

Power and Cord

Keep air puriﬁer near the outlet it is plugged into.
Never place the cord near any heat source.
Do not cover the cord with a rug, carpet, or other covering. Do not place the cord under furniture or appliances.
Keep the cord out of areas where people walk often. Place the cord where it will not be tripped over.
This air puriﬁer uses standard US 120V, 60Hz outlets. If using outside of the US, check for compatibility.

THIS APPLIANCE HAS A POLARIZED PLUG(one blade is wider than the other).To reduce the risk of electric shock,this plug is intended to fit in a polarized outlet only one way.If the plug does not fit fully in the outlet,reverse the plug.If it still does not fit, contact a qualified electrician to install the proper outlet.

DO NOT ATTEMPT TO MODIFY THIS PLUG OR DEFEAT THIS SAFETY FEATURE IN ANY WAY.

Know Your Puriﬁer

Welcome using our company air purifier ,before use please read this manual carefully to operate the product correctly.

Touch-Control Panel
Air Outlet
AQ / Night Light
Body
Air Quality Sensor
Air Inlet
True HEPA 4-stage Filter
Base Cover With Legs

Control Panel

Before ﬁrst use

Important Notice:
Don’t start the air purifier until you remove the Plastic Packaging from the filter.

Step-1: Flip the air puriﬁer over. Twist the base cover counterclockwise and remove it.
Step 2: Take out the new filter and remove the Plastic Packaging.
Step 3: Place the unpacked filter correctly back into the air purifier.
Step 4: Close the base cover and lock clockwise, be sure it’s closed tightly.

Description

The Tredyhome Air Purifier HEPA Filter TD-1500 is built with high-quality materials and advanced technology to provide efficient air purification. The HEPA filter is the core component, ensuring that even the smallest particles are trapped. The device also includes an activated carbon layer to remove odors and volatile organic compounds (VOCs), further enhancing indoor air quality.

The user-friendly interface allows for easy operation, with a simple button control panel and clear LED indicators. The night mode feature reduces noise levels to less than 25 dB, making it perfect for use in bedrooms or living rooms during the night.

TredyHome Air Purifier HEPA Filter TD-1500 Control Panel

TouchPad

Plug and turn on the machine
All lights will be ON for 1 second and you hear a beep, all lights then stay OFF .
On / Off button
Press button, AQ light turns on and Speed at level 1 (Low) .
Fan speed adjustment
The fan speed light indicates at which fan speed the appliance is operating. Press the Speed button to adjust fan speed level, 1~3 refers to Low , Medium , High level and A refers to Auto mode.
At Auto mode, the fan speed will be automatically adjusted according to AQ level as below:
Sleep mode
When you use the appliance in Sleep Mode, it works very quietly. Only the and buttons (If setting the timer) will be at half brightness, all other buttons light off. Press any other buttons(except and buttons) to exist the sleep mode.
Air Quality Sensor Light / Night Light
There is an air quality sensor inside the air purifier.
Note: Compared with professional instrument, the detecting resut of this air quality sensor may has tolerance in accuracy, we suggest you regard the sensor detecting result as a reference only.
Air Quality Sensor Light (AQ Light)
Air Quality Light Color will automatically change according to the air quality being detected.
- RED = POLLUTED ;
- ORANGE = BAD ;
- GREEN = GOOD ;
- BLUE = VERY GOOD
  Press the once to enter air quality display mode, and press again to exit.
Air Quality Sensor Light (AQ Light)
Night Light Mode (Machine Standby Status)
Enter the Night Light Mode:
- Step-1 Press button to switch Off, air purifier enter standby mode.
- Step-2 Press button Once, LED Light turns into orange as Night Light.
- Step 3 Press button again, LED Light turns to half brightness.
- Step-4 Press button third time, LED Light turns Off to exit Night Light mode.
Setting timer
You can set a timer for 2, 4, 8 hours.
1. Press repeatedly to select a time. The timer will start automatically.
  Note:The timer indicators will light up when active.
2. Once the timer has finished, the air purifier will power off.
3. To cancel a timer, press until all timer indicators are off.
  Note: You can change the fan speed at any time while the timer is on.
Filter replacement light
When indicator lights, it means that you should check the filter if it need to be cleaned or replaced.
Note: The filter’s lifetime is based to your house air quality and using time. Using the appliance in a humid environment will reduce the lifetime of the filter.
Memory Function
When the air purifier is plugged in, it will remember its previous fan speed setting.

Setup Guide

To set up the Tredyhome Air Purifier HEPA Filter TD-1500, follow these steps:

Unbox the purifier and remove any packaging materials.
Place the purifier on a flat surface in the desired room.
Plug in the power cord and turn on the device using the power button.
Choose your desired fan speed using the speed control buttons.
If necessary, activate the night mode by pressing the corresponding button.
Monitor the air quality using the LED indicator on the front panel.

Filter Replacement & Clean

Filter Replacement

When Should I Replace the Air Filter ?
It is recommended to change the air ﬁlter every 6–8 months. However, you may need to change your ﬁlter sooner or later depending on how often you use your air puriﬁer. It is important to watch out for the following signs of expired ﬁlter:

Increased operating noise
Decreased airﬂow
Clogged ﬁlter
Increased presence of odors

NOTE:

The environment in which the air purifier being used may also extend or shorten the lifetime of the the air filter. Using your air purifier in an environment of relatively high pollution may mean you will need to change the air filter more often.
If the air pollution in your environment is very high, there is a possibility that the filters may not be completely effective and may need to be replaced before lights up.
Remember to reset the air purifier after changing the air filter.

How to replace the Air Filter

Switch off the appliance and unplug it. (a)
Put the appliance upside down on a soft cloth to avoid scratching, to open the base cover, you need to find an arrow point ▲ on the base cover corresponding the CLOSE position, turn the base cover counterclockwise from CLOSE to OPEN position, then the base cover released. (b)
Remove the old filter. (c)
Remove the packaging material of the new filter. (d)
Put the new filter back into the appliance. (e)
Turn the base cover clockwise from OPEN position to CLOSE position, you will hear a "click" sound, the base cover is fastened. (f)
Put the plug in the wall socket and switch on the appliance again. (g)
Reset Filter's lifetime. (h)
The filter lifetime should be reset if lights up, after replacing the new filter, you need to reset filter lifetime.
1. Plug in the air purifier and turn it on.
2. Press and hold for 3 seconds.
3. The light will turn off, indicating that the reset is complete.

Filter replacement force mode

When using the air purifier in an environment of heavy pollution, the lifespan of the air filter may be significantly reduced. You can change the filters even if does not light up. Follow the steps below to perform a hard reset.

Replace the air filters as mentioned in the Filter Replacement section.
Plug in the air purifier and keep in standby mode.
Press and hold for 3 seconds, and it will light up.
Press and hold again for 3 seconds, and it will turn off. The reset is now complete.

Keep Filter Clean

In order to keep your purifier working with more efficiency and life-time, clean the filter (pre-filter side only) every 2 weeks with the Instruction Below:

Clean out any dust, hair, or furs remain on the pre-filter by using the vacuum hose.
Clean out any dust, hair, or furs remain on the bottom cover by using the vacuum hose.
DO NOT wash the filter with any water or liquid.

Tredyhome Air Purifier HEPA Filter TD-1500 Troubleshooting

This chapter summarises the most common problems you could encounter with the appliance. If you are unable to solve the problem with the information below, contact the Consumer Care Centre in your country.

Problem	Cause	Solution
Air purifier does not power on.	Unit is not plugged into an electrical outlet.	Connect the plug to a powered electrical outlet.
	Outlet is not working properly.	Try plugging the air purifier into a different outlet.
	Power button has not been pressed after plugging in the air purifier.	Press once to turn on the air purifier.
	Power cord is damaged.	Immediately discontinue use and contact Customer Support.
	Air purifier is defective or malfunctioning.	Immediately discontinue use and contact Customer Support.
Air purifier does not respond to button controls.	Air purifier is not plugged into an outlet.	Connect the plug to a powered electrical outlet.
	Air purifier is defective or malfunctioning.	Immediately discontinue use and contact Customer Support.
Air purifier makes an unusual noise while operating.	Foreign object inside the unit.	Immediately discontinue use and contact Customer Support.
	Filter is dirty or improperly placed in housing.	Replace the air filter as instructed in the Filter Replacement section.
	The air purifier has been reset incorrectly.	See the Filter Replacement section on how to properly reset the unit.
Significantly reduced airflow	Filter needs to be replaced.	Replace the air filters as instructed in the Filter Replacement section.
	Not enough clearance on all sides of the purifier.	Ensure there is at least 38 cm (15 inches) of clearance on all sides of the purifier.
	Room is too large for the air purifier's applicable area.	Ensure the room is smaller than (N) ft² for optimal performance.
Poor air purification quality	Air inlet or outlet is blocked.	Remove objects blocking air inlet or outlet.
	Filter packaging has not been removed before use.	Remove filter from packaging before use.
Filter reset button is still illuminated after replacing filter	Filter does not fit properly or packaging still on filter.	Properly place filter as noted in the Before First Use and Filter Replacement sections.

Warranty

Warranty Period 1 Year from Order Date
TREDY will replace any products found to be defective due to manufacturer flaws based on the eligibility. Refund or Replacement is available within 30 days of purchase date.

Unsupervised use by children under 18 years of age.

Pros & Cons

Pros:

Highly effective HEPA filtration system
Compact and stylish design
Multiple speed settings and night mode for flexible use
Real-time air quality monitoring with LED indicators
Economical filter replacement costs

Cons:

Filter replacement required every 6-12 months depending on usage
Slightly higher noise level on higher fan speeds
No built-in ionizer or UV light feature

Customer Reviews

Customers have praised the Tredyhome Air Purifier HEPA Filter TD-1500 for its effectiveness in improving indoor air quality and its quiet operation. Many users appreciate the easy setup and user-friendly interface. However, some customers have noted that the filter replacement can be somewhat expensive and that higher fan speeds can produce noticeable noise.

Search Manuals in: hepa-filter

Read More

Read More

Read More

Read More