Epson Home Cinema Gaming Projector 2350

Introducing the Home Cinema is a powerful 4K PRO-UHD smart gaming projector designed to elevate your home entertainment experience. With its advanced 3-chip 3LCD technology, it delivers stunning brightness and color accuracy, making it perfect for both movies and gaming. The projector supports HDR10 and features low input lag for seamless gameplay. Priced at $1,299, it also includes built-in Android TV for easy streaming of your favorite content.

Product Box Contents

Save all the packaging in case you need to ship the projector. Always use the original packaging (or equivalent) when shipping.

Make sure your projector box includes all of these parts:

product_box_contents_epson_home_cinema_gaming_projector_2350.png

Projector
Projector remote control (two AAA batteries)
Android TV remote control (two AAA batteries)
Alternate rear cover
Power cord

Additional Components
Depending on how you plan to use the projector, you may need to obtain additional components.

Note: To connect a Mac that does not include a compatible video output port, you need to obtain an adapter that allows you to connect to an input port on the projector. Contact Apple for compatible adapter options. To connect a smartphone or tablet, you may need to obtain an adapter that allows you to connect to the projector. This allows you to mirror your smartphone or tablet screens, watch movies, and more. Contact your device manufacturer for compatible adapter options.

Unless listed as available from Epson in this table, see your local computer or electronics dealer for purchase information.

Signal or connection type

Additional component necessary

HDMI

Compatible HDMI cable

Available for purchase froman authorized Epsonreseller.

Note: Older Mac computers (2009and earlier) may not supportHDMI audio.

Warranty and Registration Information

Your projector comes with a basic warranty that lets you project with confidence. Register your product online at this site: epson.com/webreg

Projector Part Locations

Front/Top

Lamp cover
Air exhaust vent
Speaker
Foot release lever
Lens
Indicators
Remote receiver
Air intake vent (air filter)
Air filter cover
Kensington security slot
Focus slider
Zoom slider
Vertical lens shift dial
Horizontal keystone slider
Rear cover
Power button
Source button

Rear

HDMI2 port
USB-A port (5VDC @ 2.0A)
HDMI1 (ARC) port
Audio Out port (3.5mm stereo)
Service port
Power inlet

Base

Ceiling mount fixing points (three M4×9mm screw points)
Air exhaust vent
Rear feet
Security cable attachment point
Air intake vent
Front adjustable foot

Remote Control

Power button
YouTube button
Apps button (displays Android TV streaming apps)
return button
Arrow buttons (move through on-screen options)
menu button
volume up and volume down buttons
rewind, play/pause, and fast forward buttons (control connected streaming device)
keystone button (corrects image distortion)
Google Assistant mic button (operates Android TV using voice commands)
source button
Enter button (selects options)
home button (displays the Android TV home screen)
A/V mute button (turns off picture and sound)
Indicator
Microphone
Remote control emitter

Note: This remote control is used to control the projector and the connected streaming device after it has been paired to the projector.

Android TV remote control

Power button
Directional pad
Enter button
Back button
Volume buttons
YouTube button
Netflix button
Google Play button
Home button (displays the Android TV home screen)
Installed apps button
Command indicator
Google Assistant mic button (operates Android TV using voice commands)
Microphone
Remote control emitter

Note: This remote control is used to control the streaming device only if it is connected to a different device or projector. You do not need to use this remote control in addition to the projector remote control.

Specifications

General Projector Specifications

Type of display
Poly-silicon TFT active matrix
Resolution
1920 × 1080 pixels (3840 × 2160 pixels with 4K Enhancement)
Lens
F=1.49 to 1.77
- Focal length: 18.2 to 29.2 mm
Color reproduction
Up to 1.07 billion colors
Brightness
High Power Consumption mode: White light output 2800 lumens (ISO 21118 standard) Color light output 2800 lumens
Standard Power Consumption mode: White light output 2300 lumens (ISO 21118 standard)
Low Power Consumption mode: White light output 1900 lumens (ISO 21118 standard)
Note: Color brightness (color light output) and white brightness (white light output) will vary depending on usage conditions. Color light output measured in accordance with IDMS 15.4; white light output measured in accordance with ISO 21118.
Contrast ratio: 35000:1 with Auto Iris on, Dynamic Color Mode, High Power Consumption mode, and Wide zoom mode
Image size (in native aspect ratio)
Note: For screen sizes above 300″, a high-gain screen and a light-controlled environment may be required.
Projection distance (in native aspect ratio)
45 inches (115 cm) to 945 inches (2400 cm)
Projection methods
Front/Ceiling, Rear, Rear/Ceiling
Optical aspect ratio (width-to-height)
16:9
Focus adjustment
Manual
Zoom adjustment
Manual
Zoom ratio (Tele-to-Wide)
1 to 1.62
Internal sound system
10 W monaural
Noise level
36 dB (High Power Consumption mode)
32 dB (Standard Power Consumption mode)
28 dB (Low Power Consumption mode)
Keystone correction angle
Vertical: ± 30° (manual or using Auto Keystone)
Horizontal: ± 30° (manual)
Service port
USB type mini-B port for firmware updates only

Projector Lamp Specifications

Type
UHE (Ultra High Efficiency)
Power consumption
200 W
Lamp life
High Power Consumption mode: Up to about 4500 hours
Standard Power Consumption mode: Up to about 4500 hours
Low Power Consumption mode: Up to about 7500 hours

Note: Turn off this product when not in use to prolong the life of the projector. Lamp life will vary depending upon mode selected, environmental conditions, and usage. Brightness decreases over time.

Remote Control Specifications

Reception range
19.7 feet (6 m)
Batteries
Two alkaline or manganese AAA

Bluetooth Specifications

Streaming device

Version Bluetooth
Ver. 5.0
Output
Class 2
Communication distance
Approximately 32.8 ft (10 m)
Supported profiles
A2DP, AVRCP
Frequency used
2.4 GHz
Supported codecs
SBC

Projector Dimension Specifications

Height (excluding feet)
4.8 inches (123 mm)
Width
13.1 inches (333 mm)
Depth
10.9 inches (276.4 mm)
Weight
9.0 lb (4.1 kg)

Projector Electrical Specifications

Rated frequency
50/60 Hz
Power supply
100 to 240 V AC ±10% 3.2 to 1.5 A
Power consumption (100 to 120 V)
Operating:
High Power Consumption mode: 316 W
Standard Power Consumption mode: 280 W
Low Power Consumption mode: 242 W
Sleep mode: 0.3 W
Power consumption (220 to 240 V)
Operating:
High Power Consumption mode: 301 W
Standard Power Consumption mode: 268 W
Low Power Consumption mode: 231 W
Sleep mode: 0.3 W

Projector Environmental Specifications

Temperature
Operating:
Up to 7500 ft (2286 m): 41 to 95 °F (5 to 35 °C)
7500 ft (2286 m) to 10000 ft (3048 m): 41 to 86 °F (5 to 30 °C)
Storage: 14 to 140 °F (–10 to 60 °C)
Humidity (relative, noncondensing)
Operating: 20 to 80%
Storage: 10 to 90%
Operating altitude
Up to 4921 feet (1500 m) 4921 feet (1500 m) to 10000 feet (3048 m) with High Altitude Mode enabled

Description

Projector 2350 is engineered with advanced technology to provide an exceptional viewing experience. Its 3LCD system ensures vibrant colors and high brightness, making it suitable for both bright and dark environments. The projector's sleek design and compact size make it easy to place in any room without taking up too much space.

The projector comes with a range of connectivity options, including HDMI 2.1, which supports the latest gaming consoles and devices. The built-in wireless connectivity allows for seamless streaming from smartphones, tablets, and other devices.

Adjusting the Menu Settings

Using the Projector's Menus

You can use the projector's menus to adjust the settings that control how your projector works. The projector displays the menus on the screen.

Press the menu button on the projector remote control.
You see a screen like this:
Press the up or down arrow button to move through the menus listed on the left. The settings for each menu are displayed on the right.
Note: The available settings depend on the current input source.
To change settings in the displayed menu, press Enter.
Press the up or down arrow button to move through the settings.
Change the settings using the buttons listed on the bottom of the menu screens.
To return all the menu settings to their default values, select Reset.
When you finish changing settings on a menu, press the return button.
Press the menu button to exit the menu or the return button to return to the previous screen.

Using the Displayed Keyboard

You can use the displayed keyboard to enter numbers and characters.

Use the arrow buttons on the remote control to highlight the number or character you want to enter and press Enter.
Note: Each time you select the CAPS key, the characters change between upper case and lower case. Each time you select the SYM1/2 key, the symbols enclosed by the frame change.
After entering the text, select Finish on the keyboard to confirm your entries. Select Cancel to cancel entering text.

Available Keyboard Text

You can enter the following text when using the displayed keyboard.

Text type	Details
Numbers	0123456789
Alphabet	ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz
Symbols	! " # $ % & ' ( ) * + , - . / : ; < = > ? @ [ \ ] ^ _ ` { \| } ~

Image Quality Settings

Image Menu

Settings on the Image menu let you adjust the quality of your image for the input source you are currently using. The available settings depend on the currently selected input source.

Setting

Options

Description

Light Output

High

Standard Low

Adjusts lamp brightness

Color Mode	See thelist of available Color Modes	Adjusts the vividness of image colors for various imagetypes and environments
Expert Settings	Brightness	Lightens or darkens the overall image
	Contrast	Adjusts the difference between light and darkareas in the image
	Color Saturation	Adjusts thecolor intensity of the image
	Tint	Adjusts thebalance of greento magenta tones in the image
	Sharpness	Adjusts the sharpness or softness of image details
	White Balance	Color Temp.: sets the color temperature according to the selected color mode; lower values tint the image red, and higher values tintthe image blue
	White Balance	Custom: adjuststhe individual RGB components of the offset and gain

Expert Settings	Frame Interpolation	Adjusts the smoothness of image movement
	Image Enhancement	4K Enhancement: projects at a doubled resolution
		Image Preset Mode: selects preset Image Enhancement settings
		Noise Reduction: reduces flickering in images
		MPEG Noise Reduction: reduces thenoise or staticin MPEG video
		DetailEnhancement: enhances details to create clear outlines
	Scene Adaptive Gamma	Adjusts the color depending on the displayed scene; larger numbers enhance contrast
	Gamma	Adjusts thecolors by selecting one of the gamma correction values or referring to a gamma graph
	RBGCMY	Adjusts the hue, saturation, and brightness for each color
	Auto Iris	Adjusts the projected luminance based on the image brightness
Reset Image	—	Resets all adjustment values on the Image menu to their default settings.

Note: The Brightness setting does not affect lamp brightness. To change the lamp brightness, adjust the Light Output setting.

Input Signal Settings

Signal Menu
Normally the projector detects and optimizes the input signal settings automatically. If you need to customize the settings, you can use the Signal menu. The available settings depend on the currently selected input source.

To change settings for an input source, make sure the source is connected and select that source.

Setting

Options

Description

Aspect

See thelist of available aspect ratios

Sets the aspect ratio (width-to- height ratio) for the selected input source

Overscan

Auto Off 4%

Changes the projected image ratio to make the edgesvisible by a selectable percentage or automatically

Color Space	Auto BT.709 BT.2020	Sets the conversion system for the colorspace (set to Auto for most cases)
Dynamic Range	Dynamic Range	Changes the rangeof dark and bright areas in the image (set to Auto for most cases)
	Signal Status	Displays the detected input signal
	HDR10 Setting	Adjusts the PQ curve of the dynamic range (available when Dynamic Range or Signal Status is set to HDR10)
	HLG Setting	Adjusts the HLG curve of the dynamic range (available when Dynamic Range or Signal Status is set to HLG)

Advanced	Video Range	Sets the video range to match the setting of the device connected to the HDMIinput port Auto: detects the videorange automatically Limited: for images from a device other than a computer; can also be selected if the black areas of the imageare too bright Full: for images from a computer; can also be selected if the image is too dark
	EDID	Selects EDID settings Normal: supports 3840 × 2160 30Hz signals 21:9: supports 2560 × 1080 60Hz signals
	Image Processing	Improves the response speedfor images projected at high speed Fast: increases image processing speed Fine: increase imagequality
Reset Signal	—	Resets all adjustment values on the Signal menu to their default settings.

Projector Feature Settings

Settings Menu
Options on the Settings menu let you customize various projector features.

Note: Turning off your input devices will not power down the projector even if you select On as the Power Off Link setting.

Setting

Options

Description

Keystone

H/V-Keystone Quick Corner

Adjusts image shape to rectangular (horizontally and vertically)

H/V-Keystone: lets you manually correct horizontal and vertical sides; turn on or off Auto V- Keystone and the H-Keystone Adjuster setting (Auto V- Keystone only functions when the Projection setting is set to Front)

Quick Corner: selectto correct image shape and alignment using an on-screen display

Sound

Volume Sound Mode

Adjusts the projector's sound output

Volume: adjusts the volume of the projector’s speaker system or external device connected to the Audio Out port

Sound Mode: selects a sound mode depending on the projected content

HDMI Link

DeviceConnections HDMI Link

Audio Out Device Power On Link Power Off Link

Adjusts the HDMI Link options that allow the projector remoteto control HDMI-connected devices that support the CEC standard

Device Connections: lists the devices connected to the HDMI 1 and HDMI 2 ports

HDMI Link: enables or disables the HDMI Link function

Audio Out Device: selects whether to output audiofrom the internal speakers or a connected audio/video system

Power On Link: controls the projector or a linked device

Device ->PJ or Bidirectional: turns on the projector when the linked device is turned on
PJ ->Device or Bidirectional: turns on the linked device when the projector is turned on

Power Off Link: controls whether linked devices are turned off whenthe projector is turned off

Child Lock

Off

Locks the powerbutton

Memory

Load Memory Save Memory Erase Memory Rename Memory

Controls memoryfunctions for current projector settings

Load Memory: letsyou load a saved memory

Save memory: letsyou save current projector settings to memory

EraseMemory: lets youdelete a saved memory

RenameMemory: lets you rename a saved memory

Reset Settings

—

Resets all adjustment valueson the Settings menu to their default settings, except for the following:

AudioOut Device
Power On Link
Power Off Link
Memory

Projector Setup Settings

Extended Menu
Settings on the Extended menu let you customize various projector setup features that control its operation.

Setting	Options	Description
Display	Messages Display Background Startup Screen	Selects various displayoptions Messages: controls whether messages are displayed on the screen DisplayBackground: selects the screen color or logo to display when no signal is received Startup Screen: controls whether a special screen appears when theprojector starts up
Display	Panel Alignment	Corrects colormisalignment in the projected image Panel Alignment: set to On to correct color misalignment in the projected image SelectColor: select thecolor to correct PatternColor: select the pattern used for correction Start Adjustments: startpanel alignment Memory: saves, loads, renames, or erases panel alignment settings Reset: resets all panelalignment settings to their defaults
Projection	Front Front/Ceiling Rear Rear/Ceiling	Selects the way the projector faces the screenso the imageis oriented correctly

Operation	Direct PowerOn	Turns on the projector when you plug it in
	Sleep Mode	Automatically places the projector in standby mode after an interval of inactivity
	Sleep ModeTimer	Sets the interval for sleep mode
	Illumination	Turns off the powerand status lights on the projector
	High Altitude Mode	Regulates the projector’s operating temperature at altitudes above 4921feet (1500 m)
	USB Power	AlwaysOn: continues supplying power to the streaming media player connected to the projector even when it is not projecting images On While Projecting: supplies power to the streaming media player only whenthe projector is projecting images
Language	Various languages available	Selects the language for projector menu and message displays (not changed by Reset option)
Reset Extended	—	Resets all adjustment valueson the Extended menu to their default settings, except for the following: Projection High Altitude Mode USB Power Language

Projector Information Display

Info Menu
You can display information about the projector and input sources by viewing the Info menu. However, you cannot change any settings in the menu.

Select Version to display the projector's firmware version. Select Projector Info to display the settings described below.

Information item	Description
Lamp Hours	Displays the number of hours (H) the lamp hasbeen used; if the information is displayed in yellow, obtain a genuine Epson replacement lamp soon
Source	Displays the name of the portto which thecurrent input sourceis connected
Input Signal	Displays the inputsignal setting of the current input source
Resolution	Displays the resolution of the current input source
Scan Mode	Displays the scanmode of the current inputsource
Refresh Rate	Displays the refresh rate of the current inputsource
Sync Info	Displays information thatmay be neededby a service technician

Color Depth	Displays the colordepth
Color Format	Displays information on the Color Spaceand Dynamic Range
Status	Displays information about projector problems that may be needed by a service technician
Serial Number	Displays the projector's serial number

Projector Reset Options

Reset Menu

You can reset most of the projector settings to their default values using the Reset All Config option on the Reset menu.

You can reset the projector's lamp usage timer to zero when you replace the lamp using the Reset Lamp Hours option and you can also reset all memory entries using the Reset Memory option.

-_projector_reset_options_epson_home_cinema_gaming_projector_2350.png

You cannot reset the following settings using the Reset All Config option:

Language
Lamp Hours
Memory
Panel Alignment

Setup Guide

To set up the Epson Home Cinema Gaming Projector 2350,

Start by placing the projector at an optimal distance from your screen or wall.
Connect your device via HDMI or wirelessly using Wi-Fi or Bluetooth.
Use the included remote control to power on the projector and navigate through the menu to configure your settings.
Adjust the focus and zoom to ensure a clear image.
You can also use the keystone correction feature to adjust the image if it's not perfectly aligned.
For gaming, ensure that the "Gaming Mode" is selected to minimize input lag.

Solving Problems

Projection Problem Tips

If the projector is not working properly, try turning it off and unplugging it. Then plug it back in and turn it on.
If this does not solve the problem, check the following:

The lights on the projector may indicate what the problem is.
The solutions in this manual can help you solve many problems.

If none of these solutions help, you can contact Epson for technical support.

Note: After repairing the projector, Epson may return the projector to you in its initial status. Make sure you make a note of the account information of each online service before you contact your local dealer or the nearest Epson repair center.

Projector Light Status

The lights on the projector indicate the projector status and let you know when a problem occurs. Check the status and color of the lights and look for a solution in the table here.

Status light
Lamp light
Temp (temperature) light

Note: If the lights display a pattern not listed in the table above, turn the projector off, unplug it, and contact Epson for help.

Solving Image or Sound Problems

Check the solutions in these sections if you have any problems with projected images or sound.

Solutions When No Image Appears
If no image appears, try the following solutions:

Make sure the lens cover is off.
Press the A/V mute button on the projector remote control to see if the image was temporarily turned off.
Check the status lights to confirm the projector is operating normally.
Make sure all necessary cables are securely connected and the power is on for the projector and connected video sources.
Try using a shorter HDMI cable.
Try connecting the video source directly to the projector.
Press the projector's power button to wake it from standby or sleep mode. Also see if your connected computer is in sleep mode or displaying a blank screen saver.
If you are projecting from a streaming device, make sure the USB power cable inside the projector powers it. Turn on the connected streaming device or video source, and press the play button to start a video, if necessary.
Make sure the connected device meets the HDMI CEC standard. See the documentation supplied with the device for more information. If necessary, set the CEC function for the connected device again and restart the device. Turn off the projector and the connected streaming device or video source, and then turn them back on.
If you are projecting from a laptop computer, make sure it is set up to display on an external monitor.
Make sure the computer's display resolution does not exceed the projector's resolution and frequency limits. If necessary, select a different display resolution for your computer.
If the other solutions do not solve the problem, reset all of the projector settings using the options on the Reset menu.

Solutions When "No Signal" Message Appears

If the "No Signal" message appears, try the following solutions:

Press the source button on the projector remote control or control panel and then select from the displayed sources. Wait a few seconds for an image to appear.
Turn on the connected computer or video source, and press its play button to begin your presentation, if necessary.
Check the connection from the projector to your video sources.
If you are projecting from a laptop computer, make sure it is set up to display on an external monitor.
If necessary, turn the projector and the connected computer or video source off and then on again.
Try a different video cable.
If the other solutions do not solve the problem, reset all of the projector settings using the options on the Reset menu.

Displaying From a PC Laptop

If you see the "No Signal" message when you display from a PC laptop, you need to set up the laptop to display on an external monitor.

Hold down the laptop's Fn key and press the key labeled with a monitor icon or CRT/LCD. (See your laptop manual for details.) Wait a few seconds for an image to appear. To display on both the laptop's monitor and the projector, try pressing the same keys again.
Note: On Windows 7 or later, hold down the Windows key and press P at the same time, then click Duplicate.
If the same image is not displayed by the laptop and projector, check the Windows Display utility to make sure the external monitor port is enabled and extended desktop mode is disabled. (See your computer or Windows manual for instructions.)
If necessary, check your video card settings and set the multiple display option to Clone, Mirror, or Duplicate.

Displaying From a Mac Laptop

If you see the "No Signal" message when you display from a Mac laptop, you need to set up the laptop for mirrored display. (See your laptop manual for details.)

Open the System Preferences utility and select Displays, Display, or Color LCD.
Click the Arrange or Arrangement tab.
Select the Mirror Displays checkbox.

Solutions When "Not Supported" Message Appears

If the "Not Supported" message appears, try the following solutions:

Make sure the computer's display resolution does not exceed the projector's resolution and frequency limit. If necessary, select a different display resolution for your computer.
As a test, try setting the computer's display resolution to the lowest possible setting, and then gradually increase it as necessary.
Check the input resolution under Projector Info in the Info menu and make sure that the projector supports that resolution.

Solutions When Only a Partial Image Appears

If only a partial computer image appears, try the following solutions:

Select a different image aspect ratio in the Signal menu.
Adjust the image size using the Zoom slider.
Check your computer display settings to disable dual display and set the resolution within the projector's limits. (See your computer manual for details.)
Check the resolution assigned to your presentation files to see if they are created for a different resolution than you are projecting in. (See your software help for details.)
Make sure you selected the correct Projection setting in the Extended menu.

Solutions When the Image is Not Rectangular

If the projected image is not evenly rectangular, try the following solutions:

Place the projector directly in front of the center of the screen, facing it squarely, if possible.
Adjust the image shape using the keystone settings in the projector's menu.
Adjust the position of the projector's horizontal keystone slider.

Solutions When the Image Contains Noise or Static

If the projected image seems to contain electronic interference (noise) or static, try the following solutions:

Check the cables connecting your computer or video source to the projector. They should be:
Separated from the power cord to prevent interference
Securely connected at both ends
Not connected to an extension cable
No longer than 24 feet (7.3 m) for HDMI cables
Try decreasing the Sharpness setting in the Image menu.
Try adjusting the Noise Reduction or MPEG Noise Reduction setting in the Image menu.
Select a computer video resolution and refresh rate that are compatible with the projector.
If you connected an extension power cable, try projecting without it to see if it caused interference in the signal.

Solutions When the Image is Fuzzy or Blurry

If the projected image is fuzzy or blurry, try the following solutions:

Adjust the image focus.
Clean the projector lens.
Note: To avoid condensation on the lens after bringing the projector in from a cold environment, let the projector warm up to room temperature before using it.
Position the projector close enough to the screen.
Position the projector so the keystone adjustment angle is not so wide that it distorts the image.
Adjust the Sharpness setting to improve image quality.
If you are projecting from a computer, try using a lower resolution or try to match the projector's native resolution.

Solutions When the Image Brightness or Colors are Incorrect

If the projected image is too dark or light, or the colors are incorrect, try the following solutions:

Try selecting a color mode that best fits the image and environment.
Check your video source settings.
Adjust the available settings on the Image menu for the current input source, such as Brightness, Contrast, Tint, and/or Color Saturation.
Make sure you selected the correct Video Range setting on the Signal menu, if available for your image source.
Note: For screen sizes above 300″, a high-gain screen and a light-controlled environment may be required.
Make sure all the cables are securely connected to the projector and your video device. If you connected long cables, try connecting shorter cables.
Position the projector close enough to the screen.
If the image has been progressively darkening, you may need to replace the projector lamp soon.

Solutions When the Image is Upside Down

If the projected image is upside down, make sure you selected the correct Projection setting in the Extended menu.

Solutions to Sound Problems

If there is no sound when you expect it or the volume is too low or high, try the following solutions:

Adjust the projector's volume settings.
Press the A/V mute button on the projector remote control to resume video and audio if they were temporarily stopped.
Make sure the Audio Out Device settings are correct.
Check your computer or video source to make sure the volume is turned up and the audio output is set for the correct source.
Check the audio out cable connection between the projector and your external speakers.
If you do not hear sound from an HDMI source, set the connected device to PCM output.
If you are using a Mac and you do not hear sound from an HDMI source, make sure your Mac supports audio through the HDMI port. If not, you need to connect an audio cable directly to your speaker system.

Solving Projector or Remote Control Operation Problems

Check the solutions in these sections if you have problems operating the projector or remote control.

Solutions to Projector Power or Shut-Off Problems

If the projector does not come on when you press the power button or it shuts off unexpectedly, try the following solutions:

Make sure the power cord is securely connected to the projector and to a working electrical outlet.
The projector's power button may be locked for security. Unlock it or use the projector remote control to turn on the projector.
If the power button on the remote control does not turn on the projector, check its batteries.
Make sure you are using the projector remote control and not the remote control for Android TV.
Make sure Sleep Mode is not in effect. Perform any operation to wake the projector. To turn off Sleep Mode, select Off as the Sleep Mode setting.
The power cord may be defective. Try another power cord. If that doesn't work, disconnect the cord and contact Epson.
The cooling fans may run in standby status depending on the projector settings. Also, when the projector wakes from standby status, the fans may cause an unexpected noise. This is not a malfunction.

Solutions to Remote Control Problems

If the projector does not respond to remote control commands, try the following solutions:

Check that the remote control batteries are installed correctly and have power. If necessary, replace the batteries.
Make sure you are operating the remote control within the reception angle and range of the projector.
Make sure the projector is not warming up or shutting down.
Check to see if a button on the remote control is stuck down, causing it to enter sleep mode. Release the button to wake the remote control up.
Make sure the projector remote control is paired to the streaming device to operate Android TV features (if applicable).
Make sure you are using the projector remote control and not the remote control for Android TV.
Strong fluorescent lighting, direct sunlight, or infrared device signals may be interfering with the projector's remote receivers. Dim the lights or move the projector away from the sun or interfering equipment.
If you lose the remote control, you can purchase another from an Epson parts distributor

Solutions to HDMI Link Problems

If you cannot control an HDMI device using the HDMI Link feature, try the following solutions:

Make sure all necessary cables are securely connected and the power is on for the projector and connected video sources.
Make sure the cables meet the HDMI CEC standard.
Make sure the connected device meets the HDMI CEC standard. See the documentation supplied with the device for more information.
Replace the HDMI cable or try a shorter one.
Make sure the HDMI Link setting is set to On.
Check if the device is available in the Device Connections list in the Settings menu. If the device does not appear, it does not meet the HDMI CEC standards. Connect a different device.
Make sure the connected devices are turned on and in standby status. See the documentation supplied with the device for more information.
If you connected a new device or changed any connections, make sure the CEC function is set for the connected device. You may need to restart the device.

Epson Home Cinema Gaming Projector 2350 Pros & Cons

Pros

High brightness and contrast ratio for vivid images
Low input lag ideal for gaming
Advanced color technology with HDR10 and HLG support
Multiple connectivity options including HDMI 2.1 and wireless
Long-lasting lamp life up to 15,000 hours in Eco mode

Cons

Higher price point compared to budget projectors
No built-in streaming services (requires external devices)
Some users may find the built-in speakers insufficient for large rooms

Customer Reviews

Customers have praised the Epson Home Cinema Gaming Projector 2350 for its excellent image quality and low input lag. Many reviewers have noted that it significantly enhances their gaming experience. However, some users have mentioned that the built-in speakers could be more powerful and that the projector's menu interface could be more intuitive.

Common complaints

Including the lack of built-in streaming services and the higher price compared to other projectors on the market.

Search Manuals in: home-cinema

Read More

Read More