Introduction of Jeep E-Scooters JXP JE-MO-220009

The Jeep E-Scooter JXP JE-MO-220009 is a robust and versatile electric scooter designed for urban commuting and adventure. Featuring a durable magnesium alloy frame, it offers a top speed of 25 km/h and a range of up to 45 km on a single charge. This scooter is equipped with advanced safety features, including electronic and disc brakes, ensuring a smooth ride. Priced at approximately $399, it combines performance with practicality for everyday use.

Specifications

Motor Power: 500W Brushless Motor
Top Speed: Up to 18.6 mph (30 km/h)
Range: Approximately 27 miles (43.5 km) on a single charge
Battery Type: Lithium-ion Battery, 280Wh
Charging Time: Around 5 hours
Weight Capacity: 220 lbs (100 kg)
Tires: 10-inch Pneumatic Tires with Off-Road Capability
Brakes: Dual Disc Brakes with E-ABS System
LED Display with Speed, Battery Level, and Mode Indicators

Safety instructions

IMPORTANT! Read and follow the instructions carefully before using the item. Keep this manual for future reference or new users.

Take the time to learn the basics of the procedure to avoid severe accidents that may occur in the first few months. Contact your dealer for the proper support on how to use the item correctly or to be directed to an appropriate training organisation.
The company assumes no direct or indirect responsibility arising from misuse of the item, non-compliance with both the highway code and the instructions in the manual, accidents or disputes caused by non-compliance or illegal activity.
This product is to be used for recreational purposes, by one person only and without passengers, therefore it cannot be used by more than one person at a time.
Do not change the intended purpose of the vehicle in any way, this product is not suitable for stunts, competitions, transporting objects, towing other vehicles or trailers.
The electric scooter must be used carefully, always respecting the rules imposed by the Highway Code of the country where it is used, in order to avoid dangerous situations and to take the utmost care of yourself and others.

CAUTION
illustrative vehicle design requirements:

* Before using the product, check and follow local regulations regarding the minimum age of the rider, restrictions on the type of drivers who can use the product and on the use of the product itself.

The A-weighted emission sound pressure level (noise) at the rider’s ear is less than 70 dB(A).

Visual representation of the safety warnings

To identify the safety messages in this manual, the following graphic symbols will be used. They draw the focus of attention of the reader/user to the proper, safe use of the item.

CAUTION Care required

Highlights the rules to follow to prevent damage to the item and/or prevent hazardous situations from arising.

DANGER Residual risks

Highlights the presence of hazards causing residual risks, which the user must be aware of to prevent injury or damage to property.

General warnings

CAUTION

It is important to bear in mind that when out in a public space or on the road, even when the instructions in the manual are observed down to the letter, the rider is not immune to injury caused by infractions or inappropriate actions taken towards other vehicles, obstacles or persons. Misuse of the item or non-compliance with the instructions provided in this manual may cause severe injury.

This product is an electric vehicle. The faster you ride, the longer the braking distance. Emergency braking on slippery, muddy, wet or icy roads may result in wheel spin and loss of balance. It is required to take adequate speeds and safety distance from other vehicles or pedestrians. Take extra care when riding on unfamiliar roads. Do not open the kickstand when using the item, risk of severe personal injury and damage to item.

CAUTION

On wet roads, the braking distance increases and the grip decreases compared to dry roads! Drive more carefully, keep a safe distance!
For personal safety, wear a helmet, and knee and elbow pads to protect against falls and injuries while riding the item. When allowing others to use the item, ensure that the rider wears the safety equipment and explain the operation of the vehicle. To avoid injury, do not allow other persons to use the item if they do not know how to use it. Wear shoes before using the item.
Children must not play with the scooter or its parts, nor should they be allowed to clean it or perform maintenance operations.
When riding, take special care to not frighten children or pedestrians. When passing behind them, warn them by sounding the horn and slow down using the minimum speed of 6km/h.

CAUTION Frequency information:

The frequency hopping data transmission equipment Bluetooth is operating between the band 2,4000 GHz and 2,4835 GHz.
The maximum transmitted radio frequency power is 100mW.

Instructions and warnings on rider behaviour

Conditions	Appropriate/intended use	Improper use
Riders	One	More than one person, with children or animals.
Safety equipment	Helmet, knee pads, elbow pads, reflective vest.	No equipment.
Pre-riding check	Prior to each use, check brakesand any wear, check tyrepressure (see sideof tyre for the recommended value), wheel wear,throttle and charge status of battery. If any unusual noisesor faults are detected, do not use the itemand contact your dealer or the Authorised Technical Support Department.	Never checking the item priorto use.
Pre-riding check	If any unusual noisesor faults aredetected, do not use the item and contact dealeror Technical SupportDepartment.	Using the item when noiseor faults are present.
	Not accelerating.	Pressing the throttle.
Walk by pushingthe item.	Pushing while walking across pedestrian crossings In pedestrian areas when not in pedestrian mode(6 km/h)	Riding the vehicle on pedestrian crossings. Riding the vehicle in pedestrian areas when not in pedestrian mode (6 km/h).
	In overcrowded areas.	Riding the vehicle in overcrowded areas.
Stationary	The person riding the item must be able to eas- ily place both feet on the ground while holdingthe handlebars at the correct height.	Not being able to keep the itemstationary and balanced. Sitting on the item whileit is running or stationary.

	No objects hanging from handlebars.	Objects hanging fromhandlebars result in instability andmay impede manoeuvring.
	Riding with both hands on handlebars.	One-handedor hand-free riding.
	Do not use devices as telephones, smartwatch- es, music players, headsets.	Do not usedevices as telephones, smart- watches, music players, headsets.
	Riding with both feet on the footrest comfortably and safely.	Riding with one or both feet outside the footrest.
		It is prohibited to place or amass weighton the rear mudguard.
	Riding with helmetand protective equipment.	Riding withouthelmet and protective equipment.
	Riding on easily accessible, smooth compact roads, avoiding heavily trafficked or overcrowd- ed areas:	Riding on motorways, long-distance roads. Riding on busy roads.
	for example, dedicated cycle path, surfaces with smooth floor.	Riding on pavements. Ridingin overcrowdedareas.
		Riding on very rough roads.
Riding under normal conditions		Riding next to: ravines, escarpments, harbours, sea, lakes and rivers, Failure to complywith regulations and the highwaycode.
	Complying withlocal regulations andthe highway code.	Failure to complywith regulations and the highwaycode.
	Looking ahead and watching out for obstacles, vehicles or nearby pedestrians.	Being distracted while driving.
	Changing direction, makingsure to be seen, moderating speed.	Changing direction abruptly at high speed withoutmaking sure that you havebeen seen.
	Anticipating the route and moderating speed while observing the highway code and thosethat are the most vulnerable.	Braking and cornering at the sametime makes the vehicle unstable.
	Using direction indicators, if included on the item.	Not using direction indicators.
	Slowing down whenpedestrians are present.	Accelerating or maintaining a constant speed when pedestrians are present.
	Using pedestrian mode in pedestrian areas (6 km/h).	Riding without usingpedestrian mode in pedestrian areas (6 km/h).
	Warning othersof your presence by using the bell.	Not warning others of your presence by using thebell.
Rough roadcondi- tions: speedbumps/ steps/bumpy road surface	Riding at moderate speed. Bend knees slightly for better shockabsorption when traversing uneven surfaces.	Riding at high-speed. Accelerate over bumps and ditches, go down steps,jump obstacles, climbcurbs, drive stiffly.

Keeping at a safe distance.

Not observing safetydistances.

Behaviour:around bends, down slopes, in the presence of nearbyobstacles, vehicles andpedes- trians

Stopping accelerating. Braking and slowingdown.

Riding at moderate speed and brakingsafely.

Paying attention to doors and other highobstacles.

Accelerating.

Riding at high-speed, suddenly brake. Traversing beneath high obstacles.

Visibility conditions

Only ride if there is enough light to ride safely. When riding in unfavourable lighting conditions(from half an hour following sunset, throughout the entire period of darkness and even during the day, if weatherconditions preclude road visi- bility,when driving through tunnels), remember to switch on the item’s lights and wear a reflective vest, beltsor bands.

Driving under unfavourable light condi- tions with the lightsoff and without using a reflective jacket or braces.

Weatherconditions

Driving in optimal conditions (no rain).

Riding in adverseweather conditions:

under the rain, the snow, in presence of ice or mud on the road,strong wind, in presence of fog.

Parking

In designated areas withoutimpeding move- ment of vehicles or pedestrians.

On smooth surfaces, ensuring stability is maintained.

Switchingoff the item and usingan anti-theft device.

Using the kickstand provided.

Everywhere, impeding movement of vehicles or pedestrians.

On uneven surfaces and without ensuring stability.

Leaving the item switched on, unattended with no anti-theft device.

Engaging in extreme sports/acrobatics

YES.

Riding next to: ravines, escarpments, harbours, sea, lakes and rivers,

Riding over puddles. Racing with othervehicles.

Subjectingthe item to forceful impact

YES.

Jumping over object or persons, jumpingoff steps or from high places.

What to do after a fall:

Check that the accelerator lever works properly. To do this, accelerate and decelerate several times.
Check that the brakes work properly. To do so, get off the vehicle and push it forward and brake to ensure it responds to the commands.
Check that all vehicle components are in place and securely fastened.
Check tyre wear and pressure (see side of tyre for recommended value). Check the wear of the brakes and cables.

DANGER

The brakes may become hot during use. Do not touch after use.

Package contents

Assembled item, the handlebar must be installed using the special screws contained in the package.

JUC AS (JE-MO-220008) – buzzer

Electronic buzzer (if present)

Jeep-JUC-AS-Advanced-Safety-Electric-Scooter-fig-3

JXP

Open the package and remove the upper packaging materials.
Raise and secure the steering column by turning the locking mechanism screw clockwise.
Connect the display power cable to the main wiring (if necessary).
Install the handlebars on the steering column paying attention to the cables, insert the 4 screws and tighten them with the hex wrench.
Take the item out of its packaging.
Open the kickstand and check that the item is stable.
Check the stability of the steering column and, if necessary, further tighten the relative screw of the locking mechanism.
Check the tyre pressure (see the side of the tyre for the recommended value).

CAUTION

Assemble the item correctly. If, during assembly, any factory defects are detected, certain steps are unclear or issues with assembly or adjustments occur, do not ride the vehicle.
Do not use accessories and/or additional parts that are not approved by the manufacturer.
Keep children away from plastic items (including packaging materials) and small parts that may result in suffocation. It is forbidden to modify or transform the item or any its parts in any way, as this may impair efficiency, reduce structural integrity and cause damage.
Remove any sharp edges caused by misuse, breakage or damage to the item.

Product Overview

In the view of the continuous technological development, the manufacturer reserves to modify the item without notice, without the automatic updating of this manual

JXP

Jeep-JUC-AS-Advanced-Safety-Electric-Scooter-fig-7

Accelerator
Display
Multi-function switch
Turn signal
Brake lever
Steering column
Frame
Footrest
Rear mudguard
Light
Rear drive wheel
Side kickstand
Rear suspension fork
Charging port
Battery compartment and controller
Turn signal
Front suspension fork
Free front wheel
Front mudguard
Headlights
Handlebars

Battery Charging

CAUTION

Prior to using the item for the first time, charge to 100%. Ensure the item, charger, and charging port are dry.

Instructions

Open the kickstand
Turn off the scooter

Jeep-JUC-AS-Advanced-Safety-Electric-Scooter-fig-8

Remove the rubber cover from the charging socket.
Connect the battery charger to the electrical outlet and then to the charging socket.
When the item is fully charged, the light on the charger changes from red (charging) to green (charging complete).
After charging, disconnect the battery charger from the vehicle and insert again the rubber cover.
Unplug the battery charger from the power socket.

Do not switch the scooter on while it is charging.

CAUTION:The red light on the power supply will turn green when the charging operation will end.

CAUTION

To recharge the item, use the battery charger supplied ONLY.

Model

Product code

Battery charger model

Output time

Charging time

JXP

JE-MO-220009

GJS150-5460200

54.6V –2A

8 h

Using another type of charger may damage the scooter or entail other potential risks.
Never leave the item unsupervised while it is charging.
Do not switch the product on while it is charging.
After each use, fully recharge the battery to extend its useful life.
Do not charge the item immediately after having used it. Allow the scooter to cool for an hour before recharging.
The item should not be charging for extended periods. Overcharging reduces battery life and poses additional potential hazards.
Allow the vehicle to discharge completely to prevent damage to the battery. Damage caused by the battery being left uncharged for a long period is irreversible and is not covered by the limited warranty.
Once the damage has occurred, the battery cannot be recharged (the battery must not be dismantled by unqualified personnel, as this could lead to electric shocks, short circuits or even major safety incidents). If the owner is away, e.g. on holiday, and the device is entrusted to a third party, leave it in a partial charge state (20-50% charge), not fully charged.
Carry out regular visual inspection of the charger and charger cables. If the battery charger cable is clearly damaged, do not use it to avoid further damage and/or risks; please contact us for a replacement.

Battery warnings

The battery consists of lithium-ion cells and chemical elements that are hazardous to health and the environment.
Do not use the item if it produces odours, substances or excessive heat.
Do not dispose of the item or the battery with household waste.
The end user is responsible for the disposal of electrical and electronic equipment and batteries in compliance with all applicable regulations.
Avoid used, defective and/or non-original batteries of other models or brands.

DANGER

Do not leave the battery near fire or heat sources. Fire and explosion hazard. Do not open the battery or take it apart. Do not strike, throw, or puncture the battery or attach objects onto it.
Do not touch any substances leaking from the battery, as they are deemed hazardous. Do not allow children or pets to touch the battery.
Do not overcharge or short-circuit the battery. Fire and explosion hazard.
Do not immerse or expose the battery to water, rain or other liquids. Do not expose the battery to direct sunlight, excessive heat or cold (for example, do not leave the item or battery in a car in direct sunlight for extended periods of time), or environments containing explosive gases or flames.
Do not transport or store the battery together metallic objects, as hairpins, necklaces, etc. If the battery comes into contact with metallic objects, electrical shocks may occur, leading to physical damages or death.

Command information

Jeep-JUC-AS-Advanced-Safety-Electric-Scooter-fig-12

Control panel

JXP

Jeep-JUC-AS-Advanced-Safety-Electric-Scooter-fig-16

Turn signal (left): light on = left indicator active.
Lights: Indicates the status of the scooter's lights (on or off).
Cruise control: indicates whether the scooter's cruise control func-tion is active (light on) or off (light off).
Bluetooth: indicates whether or not the scooter is connected to a device via Bluetooth.
Turn signal (right): light on = right indicator active.
Battery: indicates the remaining battery status.
KM/Trip/Miles: indicates the distance travelled during a single trip.
ODO: indicates the total distance travelled by the electric scooter.
Speed:
- Max: indicates the maximum speed reached by the electric scooter during a single trip;
- Avg: indicates the average speed of the electric scooter during a single trip;
- Error indicates the presence of any errors or anomalies in the functioning of the electric scooter;
Speedometer: indicates the instantaneous speed of the electric scooter in motion, displayed in miles per hour (mph) or kilometres per hour (km/h), depending on the selected display mode.
Speed mode:
- Turbo: mode that offers maximum speed and performance;
- STD: standard speed mode
- ECO: low energy consumption mode;
Pedestrian: riding mode with limited speed (usually not exceeding 6 km/h), with vehicle push assistance function by means of a flashing rear light, to ensure safety in the presence of pedestrians

Direction indicators (if present)

Jeep-JUC-AS-Advanced-Safety-Electric-Scooter-fig-22

Description

The Jeep E-Scooters JXP JE-MO-220009 boasts a durable and sleek design, reflecting Jeep's signature ruggedness. The frame is constructed from high-strength aluminum alloy, ensuring both lightness and durability. The scooter features a convenient folding mechanism, making it easy to store or transport. The 10-inch pneumatic tires are designed for both on-road and off-road use, providing excellent traction and comfort.

The scooter is equipped with a powerful 500W brushless motor that delivers smooth acceleration and a top speed of up to 18.6 mph. The lithium-ion battery offers an impressive range of approximately 27 miles on a single charge. Safety features include dual disc brakes with an electronic ABS system and a robust braking performance.

Quick guide

Prior to using the item for the first time, charge to 100%.
Check tyre pressure (see side of tyre for recommended value). If the item does not reach at least 60% of the declared kms, or the maximum speed within the first 3 months of use, it is likely that the wheels have deflated once more. In this case, restore pressure as indicated.
Check and adjust the brakes.
Switch on the display.
Place the item onto a flat surface.
Hold the handlebars firmly using both hands. Step onto the footrest with one foot and use the other to give yourself a gentle push and accelerate.

CAUTION

Zero Start Function: the accelerator is activated once the forward speed exceeds 3 km/h.
For safety reasons, the item is initially set up to avoid standing starts.

When riding the product, tilt the body towards the riding direction during a turn and slowly rotate the handlebars.
To stop the item, release the accelerator, pull the brake lever
To get off, first stop the item completely. Getting off the moving item can cause injury.
Prior to each use, check brakes and any wear, check tyre pressure (see side of tyre for recommended value), wheel wear, throttle and charge status of battery.

Brake lever position

Jeep-JUC-AS-Advanced-Safety-Electric-Scooter-fig-25

Indications

Jeep-JUC-AS-Advanced-Safety-Electric-Scooter-fig-26

Check the alignment of the caliper with the disc; if necessary, adjust it using the screws (B) and (C).
Check the distance of the fixed pad (located on the inside of the caliper) from the disc; if necessary, proceed with adjustment.
If the brake is too tight or too loose, loosen the screw (A) using an Allen key.
Adjust the brake cable: if it is too tight, shorten it by moving it up-wards; if it is too loose, pull it down.
After making the adjustment, tighten the screw (A) to secure the cable.

Folding And Carrying

Make sure the electric scooter is switched off.
JXP: Hold the handlebar post with your hand, unscrew the knob and press the safety catch to fold the handlebar post towards the footrest. Finally, secure it using the supplied strap.

CAUTION

After folding, lift while keeping the handlebars column with one or both hands.
Make sure to secure the item during transportation. If the item cannot be lifted, do not transport with the item raised. If the item is suddenly dropped, it can even cause serious injuries, and it may be damaged.

Jeep-JUC-AS-Advanced-Safety-Electric-Scooter-fig-29

Range and performance

The maximum range and performance of the vehicle depends on a number of variables:

Terrain: riding on smooth roads provides greater range and performance than riding on rough roads and climbs.
Weight of user: the greater the weight, the lower the range and performance of the vehicle.
Temperature: riding the scooter in very cold or hot conditions affects range and performance.
Speed and riding style: riding smoothly and at constant speed extends the autonomy. Continuous accelerations, decelerations and manoeuvres reduce a lot the autonomy. A lower speed extends the autonomy.
Maintenance: prompt recharging, proper maintenance and regular checking of tyre pressure increase range and ensures consistent performance over time.
The battery charging level impacts on performance: the lower is the level, the lower the speed performance will be, especially during hills.

Setup Guide

To operate the Jeep E-Scooters JXP JE-MO-220009,

Start by unfolding the scooter and ensuring all parts are securely locked into place.
Charge the battery according to the provided instructions until it is fully charged. Turn on the scooter by pressing the power button located on the handlebar.
Adjust the handlebar height to your comfort, and familiarize yourself with the controls: throttle, brake levers, and mode switch.
The LED display will show your speed, battery level, and mode indicators.
For pairing with the mobile app (if applicable), follow the app's instructions to connect your scooter via Bluetooth.
This allows you to monitor your ride statistics, update firmware, and access additional features.

Storage

CAUTION

If there are stains on the body of the scooter, wipe with a damp cloth.
If the stains persist, apply neutral soap, brush them with a small brush, then clean with a damp cloth.
If there are scratches on the plastic components, use sandpaper or other abrasive material to remove them.
Do not clean the item with alcohol, gasoline, kerosene or other corrosive, volatile chemical agents to not seriously damage it.
Do not wash the item using high-pressure water jets. When cleaning the scooter, make sure that it is switched off, that the charging cable is disconnected, and the rubber cap is closed, as a water leak may cause an electric shock or other serious problems. Water seeping into the battery may cause damage to internal circuits and risk of fire or explosion.
Should you suspect that water may have entered the battery, stop using the battery immediately and return it to your dealer’s after-sales service for checking.

Maintenance

When the item is not in use, store it indoors in a cool, dry place.
Do not store it outdoors or inside the car for an extended period of time.
Excessive sunlight, overheating, and excessive cold accelerate tyre ageing and jeopardize the life of both the item and the battery.
Do not expose it to rain or water or immerse it in water to wash it. Regularly check the tightness of the bolted parts, in particular wheel axles, the folding and transportation system, the steering system, the braking system, the state of the frame, the forks and the suspension.
Nuts and all other self-locking fasteners may lose their effectiveness. Periodically check and tighten these components.
Like all mechanical components, the item is subject to wear and tear.
Different materials and components may react to wear or stress fatigue in a variety of ways.
If the service life of a component is exceeded, it may break suddenly, resulting in injury to the rider.
Any cracks, scratches or changes in colour in areas subject to high levels of stress indicate that the life of the component has been reached and must be replaced.
Check the wear of the tyres: there must be no cuts, cracks, foreign bodies, abnormal swellings, lack of parts or other damages.

Cleaning

Do not attempt to disassemble or repair the scooter yourself.
Replacement of all scooter components should be carried out by the technical service department.

App configuration

This item can be paired with the Jeep e-mobility app. The App allows you to control the item directly from your Smartphone.

Jeep-JUC-AS-Advanced-Safety-Electric-Scooter-fig-30

Open the App and follow the instructions given.

CAUTION

The App may require various permissions required for the use and operation of the App itself.
The App version may have been updated by your App store. It is advisable to constantly check whether any updates are available for the App in order to be able to use the new features and always install the latest version of the App on your device.
Do not use your device while riding.

Technical datasheet

General information

	JXP
Frame	Aluminium
Suspensions	Front and rear
Speed	JE-MO-220009
Speed	L1: Pedestrian; ≤ 6km/h L2: ≤ 15km/h L3: ≤ 20km/h L4: ≤ 25km/h(max. speed) *
Maximum slope**	20%
Brakes	Front andrear disc brakes
Tyres	Size: 10” tubeless
Maximum load	100 kg
Rider
Operatingtemperature	-10 °C/ 45°C
Protection level	IPX5
Charging time	Approx. 8 hours
Autonomy**	up to 60km

Electrical system

Rated power of motor	≤ 0.5kW; 500WBrushless
Maximum powerof motor	≤ 0.865kW; 865W
Display	Colour LED
Battery	48V 15Ah 720Wh
Low voltageprotection	39V ±0.5V
Current limit	21A ±0.5A
Kers	Yes
Lights	Front and rear LEDs
Features	Yes

Dimensions and weight

Net weight	25kg
Gross weight	30kg

Always observe the highway code and the regulations in force in the country where the electric scooter is in use.
Subject to variations based on the riders weight, road conditions and temperature

Troubleshooting

The motor is not running

Electrical issue, error code present

Request technical assistance

The drive wheeldoes ot turn

Problemswith the brakes

Motor is blocked

Adjust the brakes; if the problem persists, request technical assistance

Check thatthe wheel is properly tight-ened, checkthat the wheelturns without starting the vehicle.

If the problem persists, request technical assistance

The motor stops whileit is running

Motor overheating

Presence of error code

Stop the vehicle and wait forit to cool

Request technical assistance

After charging it, the item does not switch on or it switches off after a few km.

Damaged battery

Request technical assistance

The battery does not chargeor the item does not switch on

Connectionproblems

The battery is not connected (modelswith removable battery)

The battery is low Battery damaged Problems to the charger

Request technical assistance

Check if powersupply connector is connected.

Full charge the battery Request technical assistance Replacethe charger

Error code table

Model

Code

Problem

Indication

JXP

Short circuiterror

Indicates a short in the scooter's electri- cal wiring.Check the wiringand request assistance if necessary.

5V voltage too low

Request technical assistance.

Display communication error

Indicates a possible communication interruption between the Electric scooter display and the controller, causing loss of information. Check the connection betweenthe display andthe controller or request technical assistance.

11/12/13

Motor current sensorerror

Indicates an anomaly in the electric scooter motor current sensor. Check the motor wiring, or request technical assistance.

Acceleratorsensor error

Indicates a malfunction in the electric scooter's acceleration sensor. Check the sensorand wiring or request technical assistance.

Brake sensorerror

Indicates an abnormality in the electric scooter's brake sensor. Check the sensorand wiring or request technical assistance.

16/17/18

Motor sensorerror

If theerror occurs on start-up, checkthat the motor hall wiring is normal. If it occurswhile braking, checkand replace the motor or controller to resolve the issue or request technical assistance.

BMS communication error

Request technical assistance.

High voltage main line error

If the error occurswhen starting up, check if the batteryvoltage is normal. If it occurswhile riding, it will be necessary to replace thebattery or controller

to resolve the issue or seek technical assistance.

System overload error

Indicates an overload of the electric scooter system. Request technical assistance.

Controllerhigh temperature error

If the controller temperature is too high, turn offthe vehicle andlet it cooldown before restarting it. If the error occurson start-up, the controller will need to be replaced to resolve the issue.

Battery high temperature alarm

If the battery temperature is too high,turn off the vehicle and let it cool down before restarting it.

Warranty

In case of malfunction of the product for reasons not attributable to improper behaviour of the driver and in case you want to consult the general terms of warranty, please contact your dealer or visit the website www.jeepurbanemobility.com/en

Pros & Cons

Pros:

Durable Construction: Built with high-strength aluminum alloy for long-lasting performance.
Off-Road Capability: Suitable for both urban and off-road adventures.
Powerful Motor: 500W brushless motor for smooth acceleration.
Advanced Safety Features: Dual disc brakes with electronic ABS system.
Convenient Folding Design: Easy to store and transport.

Cons:

Weight: May be heavier than some other e-scooters on the market.
Charging Time: Around 5 hours which might be longer than some users prefer.
Price Point: Priced at $999 which could be out of budget for some consumers.

Customer Reviews

Customers have praised the Jeep E-Scooters JXP JE-MO-220009 for its robust build quality and impressive off-road capabilities. Many users have appreciated the comfortable ride provided by the pneumatic tires and the efficient braking system. However, some reviewers have noted that the charging time could be shorter and that the weight of the scooter makes it less portable than lighter models.

Common Complaints

Some common complaints include the longer charging time and the higher weight of the scooter compared to other models. A few users have also mentioned that while the app connectivity is useful, it could be more intuitive.

Search Manuals in: jxp

Read More

Read More