Introduction of Leivi Digital Display Smart Toilet T162A

The Leivi Toilet is a modern and innovative addition to any bathroom, designed to enhance comfort and convenience. This smart toilet features a built-in bidet seat with multiple washing settings, allowing users to customize their experience. With automatic lid opening and closing, heated seating, and a digital display for easy control, the T162A offers a luxurious touch. Additionally, it includes an energy-saving nightlight feature. The smart toilet is priced at $799.98.

Components

Zevemomo -T162A-Series-Smart-Toilet-FIG-3

Zevemomo -T162A-Series-Smart-Toilet-FIG-4

Functions Introduction

Washing function

Rear wash	Cleaning posterior.
Bidet wash	Cleaning feminine body.
Spray position adjustment	Adjust the nozzle position to expand the cleaning scope.
Water ﬂow adjustment	Adjust water ﬂow rate.
Massage cleaning	The nozzle sprays variable intensity water column to massage.
Swing cleaning Comfort functions	Swing back and forth to cleanse most areas.

Comfort functions

Seat heated	Heat the seat and keep the temperature.
Drying	Warm wind to dry the body parts.
Temperature adjustment	Adjust the temperature of water， seat or drying.
Deodorization	Auto-deodorize after seated.
Seat sensor	Functions eﬀective after seated.
Lid open/close	Users can open or close the lid by remote control or foot sensing. The lid will automatically close after about 2 mins.
Seat open/close	After the toilet lid is opened， the user can open or close the seat by remote control or foot sensing.
LED	LED on or oﬀ by light.
Prevent the low-temperature scald	To prevent scalding users， the seat temperature will decrease automatically after seated 15mins.

Cleaning fun

Anti-bacteria	It’s anti-bacterial treated on the parts which is directly touched by users, such as lid and seat.
Nozzle cleaning	The nozzle will be cleaned when it reaches out or pulls back.
Water emission	Drain the remaining water in the toilet to make the water cleaner.
Auto-ﬂushing New functions	Under the opening status of the lid, the user can sit after leaving the seat for a while, the toilet will ﬂush automatically.

New functions

Pre-wetting	After sitting, a spray of water will be automatically sprayed inside the bowl to achieve anti-fouling eﬀect.
Power outage ﬂushing	Connect to the USB TPYE-C with a power bank to achieve power oﬀ ﬂushing.
ECO	Close some functions and enter energy-saving mode.
Personal setting	You can store your preferred wand position, water temp, ﬂow, and dry temp settings.
Foot sensing induction	Touch the sensing area with foot and then the lid opens automatically. Touch the sensing area with your foot and then the seat opens automatically. Touch the sensing area with your foot and then the toilet flush automatically.

Parts name

Zevemomo -T162A-Series-Smart-Toilet-FIG-5

Display

Zevemomo -T162A-Series-Smart-Toilet-FIG-6

Product Drawings

Zevemomo -T162A-Series-Smart-Toilet-FIG-7

Power and water connection tip

Zevemomo -T162A-Series-Smart-Toilet-FIG-8

If the power cord is not long enough, please do not use an extension cord.
Only for reference. Bathroom sizes and conﬁgurations may vary.

Speciﬁcations

Rated voltage			100-130V~ 50/60Hz
Power cord length			About 1.5m (59.1 in)
Cleaning	Water volume	Rear wash	About 0.5L (0.13 gal)-0.7L（0.18 gal）/min (water pressure 0.2MPa, 3 levels adjustment）
		Bidet wash
	Swing		Oscillating cleaning forward and backward
	Massage		Two options: press once for interval cleaning, press twice for continuous cleaning
	Water volume /nozzle position		3 levels adjustment
	Water temperature range		About 68°F-107°F（4 levels adjustment）
	Safety device		Temperature limit circuit, thermostat, thermal fuse
Drying	Warm wind temperature		About 89°F-134°F（3 levels adjustment）
	Safety device		Bimetallic thermostat, thermal fuse
Seat	Surface temperature		4 levels adjustment, room temperature about 107°F
	Safety device		Thermal fuse
Self-cleaning	Antibacterial seat/nozzle		Antibacterial material/stainless steel nozzle
	Automatic nozzle cleaning		Self-cleaning
	Pre-wetting		Spray a circle of water after sitting
Deodorization method	Activated carbon deodorant		Auto open/close lid/seat	Remote control, foot sensing
Toilet	Flush consumption		4.8 L (1.27 GPF)
	Flushing mode		Siphon jet
	Rough-in		305mm（12.0 in）
Rated power	1100W		Maximum power	1600W	Waterproof level	IPX4
Water supply temperature	39°F-95°F		Ambient temperature	37°F-104°F	Net weight	About 37.3kg (about 82.2 lb)
Dimension	About 680 * 400 * 465 mm (About 26.8 * 15.7 * 18.3 in)		Water supply pressure	Minimum necessary water pressure: 0.15 MPa (over 20L (5.3 gal)/min when ﬂowing) Maximum water pressure: 0.75 MPa (static pressure)

Rated power: Set the water volume, seat temperature, and water temperature to the highest level under the conditions of ambient temperature 68°F±41°F, inlet water static pressure 0.18MPa±0.02MPa, and inlet water temperature 59°F±33°F. Turn on the bidet function, and test the average power within 60 seconds after the temperature of the outlet water stabilizes.
Maximum power: Set the water volume, seat temperature, and water temperature to the highest level under the conditions of an ambient temperature of 73°F±35°F, an inlet static pressure of 0.18MPa±0.02MPa, and an inlet temperature of 41°F±33°F. Turn on the bidet function and continue to work stably at the maximum power for a cleaning cycle.
The test method of nominal water consumption needs to correctly install the water-saving piece in the accessory kit on the angle valve according to the requirements of the installation instructions, and then perform the test according to the water consumption test standard.(Test the consumption three times for each, in which the pressure of the water hose is at a static pressure of 0.24Mpa and 0.55Mpa. Total gets six values, the sum is divided by six and the average is the nominal water consumption).

Description

Smart Toilet T162A boasts a sleek and modern design that fits seamlessly into any contemporary bathroom. The toilet features a one-piece construction with a ceramic glaze, ensuring durability and ease of maintenance. The digital display is intuitive, allowing users to adjust settings such as temperature, bidet functions, and flushing modes with simple touch controls.

Safety precautions

To prevent damage to the unit and possible injury to users, please follow the safety warnings. Please be sure to carefully read through the user’s manual before installation. Keep the user’s manual after installation to refer to for troubleshooting advice.

Symbols and meanings

WARNING: Could result in serious injury or death.

The following symbols are used to indicate important safety precautions when using the product.

Zevemomo -T162A-Series-Smart-Toilet-FIG-31

Zevemomo -T162A-Series-Smart-Toilet-FIG-1

Zevemomo -T162A-Series-Smart-Toilet-FIG-2

Installation precaution

（1）Don’t install our product in a room with more than 90%RH humidity (relative humidity). It is suggested to separate dry space from moist one, such as installing shower rooms or shower curtains.
Only the speciﬁed power supply can be used. (Other power sources may cause product failure or damage).
Please do not supply water or power before ﬁnishing installation.
Please use wires and waterproof sockets suitable for the power of this product.
Please install the waterproof socket at a suitable height on the wall.
The water-supplying pressure should be 1.5kgf/cm²~7.5kgf/cm²（0.15MPa~0.75MPa）. The toilet cannot reach full cleaning functionality if the water pressure cannot reach 0.15MPa.
The water-supplying temperature should be 39.2°F~95°F.

Notice：
Please remove the dirty water from the pipe before installation. Residual sediment and other debris may jam in the pipeline if it is the newly decorated house, which may cause damage to the machine and aﬀect the health of the human body.

Installation Tools

Zevemomo -T162A-Series-Smart-Toilet-FIG-9

Leivi Digital Display Smart Toilet T162A installation

Install the water inlet valve
Clean the ground and dry the water before installation. Mark the central lines of the draining outlet, and install the inlet valve on the wall.
Mark the curve of ceramics
Align the drain hole of the ceramic with the central line. Mark the curve of ceramics for later installation. Glass cement application：Glue the outline with glass cement to install the toilet.
Toilet installation(Method 1)
- Sealing ring installation
  Gently tilt the toilet sideways until it rests on the side surface. Install the sealing ring evenly along the outlet, and the small end of the sealing ring facing the toilet. Glue the edge of the toilet bottom with glass cement, place the toilet base along the outline, and position the toilet base.
- Toilet (ceramic) installation
  Lift the toilet, take the ﬂoor drain as a reference, align the ceramic body of the toilet with the ceramic contour line drawn on the ground, and slowly put the ceramic on the ground so that the two marks overlap. After overlapping, press the ceramic down (can be pressed by the weight of the human body) so that the sealing ring fully contacts the ground.
  - Do not move the ceramic or shake it left and right after the marks are overlapped, otherwise the seal produced by the sealing ring may be damaged and cause water leakage.
Toilet installation(Method 2)
- Remove the bidet seat
  Remove the ﬁxing screws of the toilet; remove the connecting pipes and wires of the toilet, separate the bidet seat from the toilet.
- Sealing ring installation Place the sealing ring onto the ﬂange.
- Ceramic installation
  Glue the edge of the toilet bottom with glass cement. Line up the toilet base over the ﬂage screws. Place the toilet base and secure the ﬂange bolts. Glue the edge of toilet bottom with glass cement, place the toilet base along the outline and position the toilet base.
- Bidet seat installation
  Attach the connecting pipes and wires of the toilet, adjust the bidet seat to match the toilet, use the screws to ﬁx the bidet seat on the toilet.
  Pay attention to the tightness of the pipes connection.
Connection of water inlet valve
Connect the water inlet braided pipe to the water inlet angle valve; if the water pressure is high, you can install a ﬂow restrictor or adjust the position of the angle valve to achieve the best ﬂushing eﬀect.
NOTE: Clean the ﬂoor and tools, do not use the toilet immediately, it takes 48 hours to cure and keep the toilet dry.
Connect to power
Connect the electricity plug with the protection unit. Press the power switch, the light turns on, the power is on, and hear the buzzer call.
Using the product for the first time（Check every function button of the remote control, manual ﬂushing, and side button function is normal.）
- Open the water supply valve, and connect it to the power plug. Check that every function of the product is normal, such as rear/bidet wash, dry, ﬂow adjustment, water temp adjustment, massage cleaning, swing cleaning, LED, seat heated adjustment, etc.
- Rear/bidet wash perfermance test. Press the seat sensor with your hand to check if the nozzle works or not.
  - Notes： Open the water supply valve and connect to the power plug. When using the product for the ﬁrst time, press the rear/bidet wash button in the remote control or knob. If the toilet doesn’t work, it may be a lack of water or the seat sensor is blocked.

Instructions for remote control Installation

Method 1：

Install the remote control ﬁxing panel with a magnet on the remote control ﬁxed seat and lock tightly.
Note: Pay attention to the polarity when installing the magnet. Place the larger side of the magnet hole outside the ﬁxed panel and enclose the small hole surface inside the ﬁxed panel, as shown in the below ﬁgure 1.
Put the double-sided tape on the remote control ﬁxed seat.
Clean dust, grease, and water droplets on the walls and wipe them clean.
Press the remote control ﬁxed seat with double-sided tape on it. Press it evenly for 3 to 5 minutes. Attach the remote control ﬁxed seat to the wall. Note: The method is applicable to glazed tiles, glass, and smooth walls.

Zevemomo -T162A-Series-Smart-Toilet-FIG-20

Method 2：

Drill a hole of 78mm(3.07 in)-82mm(3.23 in) length and 22mm(0.87 in) depth on the wall by the drill with a diameter of 6mm(0.24 in). Note: the position of the hole shall be satisﬁed for the user to get the remote control conveniently when sitting on the seat.
After installation, the expansion plug in the wall shall align the ﬁxing hole of the remote control and then lock the bolt. Install the remote control ﬁxing panel with a magnet on the remote control ﬁxed seat and lock tightly. Note: pay attention to the polarity when installing the magnet. Place the larger side of the magnet hole outside. The ﬁxed panel encloses the small hole surface inside the ﬁxed panel; as shown in the below ﬁgure 2

Zevemomo -T162A-Series-Smart-Toilet-FIG-21

Put the remote control on the ﬁxed base after installing the battery, and the remote control can automatically absorb on the ﬁxed base.

Zevemomo -T162A-Series-Smart-Toilet-FIG-22

NOTE

Please place the remote control on the ﬁxed place if not used. (To avoid the remote control falling down)
It may cause damage if the remote control falls down.
Please do not spill water on the remote control or drop it into the water, as it may cause damage.

Remote control panel overview

Zevemomo -T162A-Series-Smart-Toilet-FIG-23

Remote control alignment: After the product is connected to the power supply, the remote control alignment operation can be carried out within 1 minute from the buzzer call.
At the same time, press the “User 1” and “User 2” buttons on the remote control. After 3 seconds, the “rear wash/bidet wash/stop” three buttons ﬂicker at the same time, press the “plus” to increase. Select the required level, press the “stop” button, buzzer calls, then the code is successful, then the remote control can only control the product; buzzer calls two times, representing code failure;
If you want to cancel the alignment, press the “User 1” and “User 2” buttons on the remote control at the same time. After 3 seconds, the “rear wash/bidet wash/stop” buttons ﬂicker at the same time. You can cancel the code by pressing the stop key directly.

Using instructions

STOP
Press the button, all functions oﬀ.
REAR
Press the button, rear spray function turns on, auto oﬀ after 2 mins or oﬀ by pressing the stop button.
Function will stop if user leaves.
BIDET
Press the button, bidet/front spray function turns on, auto oﬀ after 2 mins or oﬀ by pressing the stop button.
Function will stop if user leaves.
FLOW ADJUSTMENT
Under rear/bidet wash mode, the water ﬂow is settled on normal level( initial level is in the medium ).
Press "FLOW" button to start the ﬂow adjustment，and press plus button to increase ﬂow, press minus button to decrease ﬂow. Total 5 levels, and corresponding indicator will on under diﬀerent level.
WATER TEMP SETTING
Under rear/bidet wash mode, initial level is in the medium.
Press "TEMP" button to start the water temp, and press plus button to increase water temp, press minus button to decrease water temp, total 3 levels, and corresponding indicator will on under diﬀerent level.
NOZZLE POSITION ADJUSTMENT
Under rear/bidet wash mode, initial level is in the medium.
Press "POSITION" button to start the position adjustmen, and press plus button to forward the nozzle position, press minus button to backwaed the nozzle position. Total 3 levels, and corresponding indicator will on under diﬀerent level.
SEAT TEMP ADJUSTMENT
Seat heated after sitting, heat preservation after reaching the set temp. The initial level is in the medium. Press "SEAT" button to start the seat temp, and press plus button to increase the seat temperature, press minus button to decrease the seat temperature. Total 3 levels(including neutral), and corresponding indicator will on under diﬀerent level.
MASSAGE
During rear/bidet wash mode, press the "Massage" button, function will start after a beep.
1. Interval massage mode: The nozzle sprays with varying pressure.
2. Powerful massage mode: The nozzle sprays pressurized water.
  Remark:
  The Massage cycle order is interval massage ＞ powerful massage ＞ regular cleaning.
SWING
During rear/bidet wash mode, press the "Swing" button, function will start after a beep. During swing function, the nozzle will oscillate back and forth. Press the "Swing" button again to stop swing function. Pressing the "Stop" button will stop all cleaning functions.
FLUSH
Press "ﬂush" button to activate ﬂushing.
DRY
Press the button, drying function turns on.(Initial level is in the medium. Press plus button to increase warm dry temp. Press minus button to decrease warm dry temp，total 5 levels, and corresponding indicator will on under diﬀerent level）Auto oﬀ after 2 mins or oﬀ by pressing the stop button.
Function will stop if user leaves.
PERSONAL SETTING USER1/PERSONAL SETTING USER 2
Under rear/bidet wash mode, you can set your preferred water temp, wand position, ﬂow and warm dry temp. While cleaning is in progress, set your preferred water temp, ﬂow, wand position and warm dry temp, and then press and hold (User1) or (User2) for 2 seconds or longer. After (User1) or (User2) is pressed, please push the button used for rear/bidet wash.
ECO
Press the button to enter energy saving mode.
Under energy saving mode, seat temperature is low(level 1) to achieve energy saving; only the power indicator light on the display is on, others are oﬀ.
Remark:
1. Energy saving mode will be suspended and goes to function mode if someone uses the seat in the middle of energy saving.
2. Seat temperature returns to the level which is settled, the display lights up normally.
3. The energy saving mode is restored after the human body leaves the seat.
LID OPEN/CLOSE
When lid open/close, press the button, lid automatically turn oﬀ/turn on.
SEAT OPEN/CLOSE
When seat open/close, press the button, seat automatically turn oﬀ/turn on.
When lid close, press the button, the inductor sense that the lid is closing.
The program automatically open the lid，and then opening the seat automatically.
COMBINATION FUNCTION KEYS
1. Stop + Rear wash: Long press for 5 seconds to activate or deactivate the powerful deodorizing function.
2. Stop + Bidet wash: Long press for 5 seconds to activate or deactivate the night light function. Stop + Massage: Long press for 5 seconds to activate or deactivate the foot sensing function . Flush + Rear wash: Long press for 5 seconds to activate or deactivate the pre-wetting.
3. Rear wash + Bidet wash: Long press for 5 seconds to activate or deactivate the automatic nozzle cleaning .

Knob function description

Sitting

Bidet wash: Knob forward, spray bar extends, bidet wash works for about 2 minutes.
Rear wash: Knob backward, spray bar extend, rear wash works about 2 minutes.
Nozzle position: Under bidet/rear wash， knob forward or backward to adjust nozzle position. Stop: Under the bidet/rear wash， press the knob to stop the current working
function.
Drying: Without any function working, long press the knob for 2 seconds to start drying; Knob forward to make the wind temp higher, knob backward to make the winding
temp lower. Flush: Without any function working, press the knob to ﬂush.

Not sitting

Press the knob to ﬂush.
Long press the knob for 5 seconds to start or close the knob indicator.

Foot sensing

When the lid and seat are closed, short-touch the sensing area with your foot, and the lid automatically opens.
When the lid and seat are closed, long touch the sensing area with your foot, and the lid and seat automatically open;
When the lid open and， seat closed, short touch the sensing area with your foot and the seat automatically opens;
When the lid and seat are open， short touch the sensing area with a foot to realize the ﬂushing function.

Setup Guide

To set up the Leivi T162A, follow these steps:

Install the toilet according to the provided installation manual, ensuring proper connection to water and power sources.
Turn on the power and perform the initial setup using the digital display. This includes setting the language, date, and time.
Download and install the companion mobile app to connect the toilet via Bluetooth for additional customization options.
Adjust settings such as heated seat temperature, bidet functions, and night light brightness to your preference.

Cleaning

Maintenance and cleaning of lid and seat.

Disconnect the power, turn the tee valve.
In case of using a mixture of washing agent and water as well as any available solution for seat cleaning, use soft and wet sponge or cloth to clean the seat. Use a soft towel to make the seat dry, or let it dry naturally.
- The product is an electric appliance. Be careful not to allow water to get inside or leave detergent in the gap between the top unit and the bowl unit. Doing so could damage or malfunction.
- Avoid using materials that will damage the surface-clean the surface with a soft and wet sponge or cotton cloth, instead of materials that can damage the surface.
- Corrosive chemicals or cosmetics (such as cleaners containing abrasive compounds and aftershave) should not come in contact with the seat as this will damage the surface.
Connect the power, and turn the tee valve.

Maintenance and cleaning of the bowl

Disconnect the power.
The bowl unit can be cleaned with a toilet brush, toilet detergent or a similar tool.
1. Corrosive chemicals (such as cleaners containing abrasive compounds and strongly acidic cleaners or strong alkaline cleaners) should not wash the bowl as this will damage the surface of the bowl.
2. Wire brush and abrasive nylon scrubbing brush should not wash the bowl as this will damage the surface of the bowl.
3. Do not use any water repellant, stain-prooﬁng cleaner or surface coating agent.
Connect the power.
1. Notice: If the bowl unit is clogged, use commercially available tools that are made for unclogging the toilet.

Cleaning the water ﬁlter

Unplug the product. Shutoff water supply
Remove the water-inflow filter from the inlet hose.
Take out the filter by using a flat-blade screwdriver to unscrew the filter .
Remove the filter screen and rinse it with clean water.
Install the filter screen as it is, and be sure to tighten it, otherwise, it will cause water leakage

Measures for special cases
When the toilet can’t be flushed automatically due to power interruption.

Zevemomo -T162A-Series-Smart-Toilet-FIG-28

When the power is off, connect to the USB TPYE-C with a power bank to achieve the power-off flushing.

When the toilet can’t be flushed automatically due to water interruption.

Flush away the sewage in the toilet by a special basin for taking in water.
After water flushing, the water level is lowered and water is added to avoid stink.

Notice：
When the toilet can’t be flushed automatically due to water interruption. After long-term idle condition, make sure to wash it for several times and the inner pipelines are cleaned before use.

Maintenance in case of long-term idle status

Disconnect the power plug, and turn off the tee valve, unscrew the inlet hose. Exhaust the water inside the inlet hose.
Press the release button of the product, exhaust the water inside the toilet

Troubleshooting

Phenomenon	Reasons	Measures
The product out of work	Whether the power supply is plugged in.	Insert the plug or detect the power socket.
	Power failure.	Wait until the power is restored.
	The leakage protector is disconnected.	Insert the plug in the power socket, press reset button on the plug.
Rear cleaning Bidet cleaning Dry The toilet does not ﬂush even when the button is pressed.	The wand extends but water does not come out. The cleaning water pressure is weak.	Has a water failure occurred? Press the “stop” button and wait until the water failure is over.
		Is the water supply valve closed? turn on the tee valve.
		Is the water ﬁlter drain valve clogged with foreign matter? Clean or replace the ﬁlter.
	Low water temperature setting	Use the water temperature keys on the remote control to adjust the cleaning water temperature.
	The seat sensor may have difficulty detecting some sitting posture.	Sit back on the toilet seat.
The nozzle stops cleaning suddenly.	If the user moves too fast or leaves the seat, the seat sensor cannot detect it in a short time.	Sit back on the seat sensor detection position, then start the relevant button.
Low water pressure when rear/bidet wash.	The filtration screen of the inlet angle valve may be blocked	Clean or replace the ﬁlter.
Low water pressure when rear/bidet wash.	The water-inﬂow hose may leakage	Check the hose and tighten it.
The deodorization eﬀect is not obvious.	The seat sensor does not sense someone sitting (no deodorizing sound)	Sit back on the seat sensor detection position.
The deodorization eﬀect is not obvious.	Activated carbon ﬁter block or spacer may be blocked.	Remove the deodorizing window to clean or replace the activated carbon ﬁlter.
The deodorant function continues to work after a user leaves.	The deodorant function will continue to work for 20 seconds in order to remove the residual odor after the use leaves.	It’s a common phenomenon.
Water comes out unexpectedly from the wand.	Abnormal operation	Disconnect the power plug and wait about 1 minute before inserting it again.
Water comes out unexpectedly from the inlet hose.	the inlet hose may damage	Replace the inlet hose.
The toilet seat does not get warm.	The seat sensor may have difficulty detecting some sitting postures.	Sit back on the toilet seat.
The toilet seat does not get warm.	The toilet seat temperature is set at a low level.	Use the remote control to adjust the seat temperature.

Phenomenon	Reasons	Measures
The dry temperature is not enough.	A lower dry temperature is set.	Use the remote control to adjust the dry temperature.
The toilet does not ﬂush when the button is pressed.	Water is not available from the water supply.	Use a bucket full of water to ﬂush.
The toilet does not ﬂush when the button is pressed.	The water supply valve is not fully open.	Check the tee valve.
Waste material does not ﬂush down completely.	The water supply valve is not fully open.	Check the tee valve.
	The water ﬁlter is clogged.	Clean the ﬁlter.
	The water supply to the toilet may disrupted by other running water ﬁxtures.	Cease using other ﬁxtures and then ﬂush the toilet.
	Flushing may be diﬃcult due to the consistency of the waste material.	Flush the toilet again. If the bowl is not cleaned with a ﬂushing to remove the stains with a brush or similar instrument.
There is residue on the bowl unit surface.	Oil and other hard-to-see grime may stick to the bowl unit surface.	Clean the bowl with a non-abrasive toilet detergent.
The toilet does not ﬂush when water pressure is normal.	Flushing valve failure.	Please professional maintenance personnel should be checked and maintained.
The remote control fail to control the toilet.	Lower battery	Replace with new batteries.
	Battery parties are mounted reversely.	Reinstall properly.
	The remote control is too far from the toilet.	Get close to the toilet.
	The remote control transmitter or the top the unit receiver may be blocked.	Remove obstructions, dirt, water droplets or any other blockages.
LED.	The indoor light is too bright.	Please turn off the indoor light and close the curtain.
The top unit is unstable.	There is clearance between the toilet seat cushion and the bowl.	It’s a common phenomenon.
Water is leaking from the plumbing connections	nuts in a connection are loose.	Tighten them with a tool such as a monkey wrench.
Water is leaking from the plumbing connections	The water leak does not stop.	Close the water supply valve and seek repair.
A strange sound is emitted from the top unit.	when a user sits on the toilet seat, the seat switch turns on. a click sound is heard.	It’s a common phenomenon.

Notice

If you are in trouble, please read the above troubleshooting and repair the product according to the instructions of the solution. If the problem is not in the common troubleshooting, please contact the professionals, or dealers, or call the national unified service hotline to ask for help. Please note that there will be no notification if any changes to this product and also accessories. There may be differences between contents and material objects, please be subject to the latter.

Pros & Cons

Pros

Advanced bidet functions for enhanced hygiene.
Heated seat and massaging jets for comfort.
Self-cleaning technology for nozzle hygiene.
Digital display for easy setting adjustments.
Bluetooth connectivity for app customization.
Water-efficient dual flush system.

Cons

High price point.
Complex installation may require professional help.
Dependence on electricity and water supply.
Potential for technical issues with digital components.

Customer Reviews

Customers have praised the Smart Toilet for its luxurious features and comfort. Here are some common reviews:

"The heated seat and massaging jets have been a game-changer for my morning routine. The digital display is very user-friendly, and the self-cleaning feature is a big plus." - John D.

"I was skeptical about the price, but the water efficiency and advanced hygiene features make it worth the investment. Highly recommend!" - Sarah K.

However, some customers have noted that the installation process can be complex and that technical issues can arise with the digital components.

WARNING
Caution	Make sure the product is installed in a well-ventilated area. Excess humidity and moisture could cause electrical shock or ﬁre.
	Disconnect the power supply before removing this product from the toilet to prevent electrical shock or ﬁre.
	To prevent electrical shock or ﬁre, disconnect the power supply before cleaning the product and do not apply water directly to it.
	Do no expose the product to direct sunlight.
	Persons with special health conditions should only use this product with the permission of their doctor. In some instances, supervision or assistance may be necessary when using the product.
	Do not use industrial water, wastewater, seawater, reclaimed water, and other sewage water. This could cause skin inﬂammation or other conditions.
	Persons (including children) with physical, perceptual, intellectual disabilities or other conditions, need to use the product under the guidance or supervision of someone else, or they may experience electric shock, injury or ﬁre.
	All electrical cords and plugs must be waterproof. The electrical plug must be located more than 0.5m above the ﬂoor and away from the bathtub and shower. Otherwise, it could cause electrical shock or a ﬁre.
	When replacing an existing bidet toilet seat, remove the old hose assemblies and replace them with the included hose assemblies. Do not reuse the old hose assemblies to avoid safety-related problems.
	Do not allow children to play with this product. Children must have adult supervision when using the product.
	The grounding wire must conform to local codes and must use a three-pronged grounding plug for use.

Search Manuals in: leivi

Read More