Introduction

Strong and effective, the Adcraft Heated Plate Lowerator LR-2 is a plate warmer ideal for catering events and commercial kitchens. Made of sturdy stainless steel, it can hold up to 72 plates that are between 9 and 12 inches in diameter. It guarantees that plates are maintained at the ideal serving temperature thanks to its thermostatically controlled heating element. The LR-2 is a dependable and practical addition to any food service operation because it has vital safety features including overheat protection and an indicator light. It is easy to use and adaptable in a variety of kitchen scenarios thanks to its changeable settings and small design.

Parts Diagram for the Electric Salamanders

parts_diagram_of_adcraft_heated_plate_lowerator_lr-2.png

Detailed Specifications

The Adcraft Heated Plate Lowerator LR-2 comes with the following key features:

Stainless steel construction for durability and easy cleaning
Adjustable temperature control for optimal food warming
LED display for easy operation and temperature monitoring
Cord storage for a clutter-free countertop
Heated plate size of 12 x 16 inches for ample food serving

Wiring Diagram for the Plate Lowerator

Description

A useful and adaptable kitchen tool, the Adcraft Heated Plate Lowerator LR-2 is ideal for reheating food before serving. It's a great option for parties and family get-togethers because of its roomy warming plate that holds a lot of food. Your food will stay warm and fresh for longer if you use the adjustable temperature control to establish the ideal temperature for it. Your countertop will remain neat and orderly thanks to the wire storage feature and the LED display, which makes controlling and monitoring the temperature simple.

HOW TO INSTALL

Remove unit from box and make sure all plastic, tape and packing materials are removed.
Place the unit on a flat, secure surface with at least 12” of open space around all sides.
Check to make sure the outlet of the correct voltage for this item (120V) is near. Do not use an extension cord, this item must be plugged directly into an outlet.

SPRING ADJUSTMENT

The adjustable tubes are set to a factory default. To adjust the tube size follow these steps:

Lift up the limited post and rotate it to the desired position.
Put the post down and insert it into the locating hole below.
Stack a couple of plates on the holder and check to see if they fit.

HOW TO USE

Plug the unit into an outlet of the appropriate voltage.
Turn the thermostat dial clockwise to heat up the unit.
Once the unit is warmed up, set the thermostat to the desired temperature.

NOTE: During the first time use of this unit, it is normal for a slight odor to be present. When moving the unit, always use the cart handle. Remember to lock the castors once the unit is in place and ready for use.

Setup Guide

It is quite easy to set up the Adcraft Heated Plate Lowerator LR-2. The actions to take are as follows:

Take out the appliance's package and unpack it.
Turn on the appliance by plugging it into a power socket.
To get the desired temperature, adjust the control.
Place your food on the heated plate and close the lid.
Observe the temperature and make any required adjustments.

CLEANING

NOTE: To maintain cleanliness and increase service life, this item should be cleaned daily. Do not immerse the unit in water or any other liquid, if liquid enters the electrical compartment it may cause a short circuit or electrical shock.

Before cleaning or attempting to move this item, turn off, unplug and let the unit cool completely.
Wipe the entire unit with a clean soft cloth until it is completely dry.
To avoid damage to the unit, do not use abrasive cleaners or scouring pads.
If soap or chemical cleaners are used, be sure they are completely rinsed away with clean water immediately after cleaning. Chemical residue could damage or corrode the surfaces of the unit.

To avoid serious injury or damage, never attempt to repair or replace a damaged power cord yourself. Contact a professional repair service.

WARNINGS

Do not touch any hot surfaces.
Do not immerse unit, cord or plug in liquid at any time.
Unplug cord from outlet when not in use and before cleaning.
Plug only into a 3-hole grounded electrical outlet of appropriate voltage.
Do not operate unattended.
Do not use this unit for anything other than intended use.
Do not use outdoors.
Always use on a firm, dry and level surface at least 12” from walls or any other obstruction.
Do not use if unit has a damaged cord or plug, in the event the appliance malfunctions, or has been damaged in any manner.
Keep children and animals away from unit.
Any incorrect installation, alterations, adjustments and/or improper maintenance can lead to property loss and injury. All repairs should be done by authorized professionals only.
Ensure that the designated power supply is adequate for continual usage.

Troubleshooting

Problem	Possible Causes	Solution
Power light is on but the unit is not getting hot when you turn the thermostat up	It’s either a defective thermostat or a burnt out heating element	Replace the broken part
Temperature keeps rising on its own	The thermostat is malfunctioning	Replace the thermostat
Power is connected, heat is working but the indicator light is not on	The indicator light is defective	Replace the indicator light
Unit is plugged in but no indicator light or heat is working	The electrical connection is not connected well or the fuse is blown	Check the electrical connection to ensure it’s connected properly. Replace the fuse if it’s blown.

ACE Equipment One Year Limited Warranty

Admiral Craft Equipment Corp. (ACE) warrants its equipment against defects in materials and workmanship, subject to the following conditions: ACE Equipment is warranted for one year, effective from the date of purchase by the original owner. A copy of the original receipt or other proof of purchase is required to obtain warranty coverage. This warranty applies to the original owner only, and is not assignable.

For warranty and non-warranty related issues, technical support, purchase replacement parts and warranty registration visit www.admiralcraft.com.

Pros & Cons

Pros

Large hot plate for generous portions of food
Temperature control that can be adjusted for ideal meal warming
LED display for temperature monitoring and ease of use
To keep a countertop clear of clutter, store cords.
Built with stainless steel for longevity and ease of cleaning

Cons

When utilized for an extended length of time, it could use a substantial quantity of electricity.
Could require a considerable amount of counter space.

Customer Reviews

Positive reviews of the Adcraft Heated Plate Lowerator LR-2 from users highlight its large heated plate, temperature control that can be adjusted, and sturdy build. Customers have, however, voiced complaints regarding its comparatively expensive price point and excessive electricity use. All things considered, the LR-2 is a sturdy and useful kitchen tool that is well worth the money for people who host parties regularly or have a large family.

Search Manuals in: lowerator

Read More