Adcraft Heated Plate Lowerator LR-2 Instruction Manual

cover-image

Content

1.png

Introduction

Strong and effective, the Adcraft Heated Plate Lowerator LR-2 is a plate warmer ideal for catering events and commercial kitchens. Made of sturdy stainless steel, it can hold up to 72 plates that are between 9 and 12 inches in diameter. It guarantees that plates are maintained at the ideal serving temperature thanks to its thermostatically controlled heating element. The LR-2 is a dependable and practical addition to any food service operation because it has vital safety features including overheat protection and an indicator light. It is easy to use and adaptable in a variety of kitchen scenarios thanks to its changeable settings and small design.

Parts Diagram for the Electric Salamanders

parts_diagram_adcraft_heated_plate_lowerator_lr-2.png
parts_diagram_of_adcraft_heated_plate_lowerator_lr-2.png

Detailed Specifications

The Adcraft Heated Plate Lowerator LR-2 comes with the following key features:

  • Stainless steel construction for durability and easy cleaning
  • Adjustable temperature control for optimal food warming
  • LED display for easy operation and temperature monitoring
  • Cord storage for a clutter-free countertop
  • Heated plate size of 12 x 16 inches for ample food serving

Wiring Diagram for the Plate Lowerator

adcraft_heated_wiring_diagram_for_the_plate_lowerator_lr-2.png

Description

A useful and adaptable kitchen tool, the Adcraft Heated Plate Lowerator LR-2 is ideal for reheating food before serving. It's a great option for parties and family get-togethers because of its roomy warming plate that holds a lot of food. Your food will stay warm and fresh for longer if you use the adjustable temperature control to establish the ideal temperature for it. Your countertop will remain neat and orderly thanks to the wire storage feature and the LED display, which makes controlling and monitoring the temperature simple.

HOW TO INSTALL

  1. Remove unit from box and make sure all plastic, tape and packing materials are removed.
  2. Place the unit on a flat, secure surface with at least 12” of open space around all sides.
  3. Check to make sure the outlet of the correct voltage for this item (120V) is near. Do not use an extension cord, this item must be plugged directly into an outlet.

SPRING ADJUSTMENT

The adjustable tubes are set to a factory default. To adjust the tube size follow these steps:

  1. Lift up the limited post and rotate it to the desired position.
  2. Put the post down and insert it into the locating hole below.
  3. Stack a couple of plates on the holder and check to see if they fit.

HOW TO USE

  1. Plug the unit into an outlet of the appropriate voltage.
  2. Turn the thermostat dial clockwise to heat up the unit.
  3. Once the unit is warmed up, set the thermostat to the desired temperature.

NOTE: During the first time use of this unit, it is normal for a slight odor to be present. When moving the unit, always use the cart handle. Remember to lock the castors once the unit is in place and ready for use.

Setup Guide

It is quite easy to set up the Adcraft Heated Plate Lowerator LR-2. The actions to take are as follows:

  • Take out the appliance's package and unpack it.
  • Turn on the appliance by plugging it into a power socket.
  • To get the desired temperature, adjust the control.
  • Place your food on the heated plate and close the lid.
  • Observe the temperature and make any required adjustments.

CLEANING

NOTE: To maintain cleanliness and increase service life, this item should be cleaned daily. Do not immerse the unit in water or any other liquid, if liquid enters the electrical compartment it may cause a short circuit or electrical shock.

  1. Before cleaning or attempting to move this item, turn off, unplug and let the unit cool completely.
  2. Wipe the entire unit with a clean soft cloth until it is completely dry.
  3. To avoid damage to the unit, do not use abrasive cleaners or scouring pads.
  4. If soap or chemical cleaners are used, be sure they are completely rinsed away with clean water immediately after cleaning. Chemical residue could damage or corrode the surfaces of the unit.

To avoid serious injury or damage, never attempt to repair or replace a damaged power cord yourself. Contact a professional repair service.

WARNINGS

  • Do not touch any hot surfaces.
  • Do not immerse unit, cord or plug in liquid at any time.
  • Unplug cord from outlet when not in use and before cleaning.
  • Plug only into a 3-hole grounded electrical outlet of appropriate voltage.
  • Do not operate unattended.
  • Do not use this unit for anything other than intended use.
  • Do not use outdoors.
  • Always use on a firm, dry and level surface at least 12” from walls or any other obstruction.
  • Do not use if unit has a damaged cord or plug, in the event the appliance malfunctions, or has been damaged in any manner.
  • Keep children and animals away from unit.
  • Any incorrect installation, alterations, adjustments and/or improper maintenance can lead to property loss and injury. All repairs should be done by authorized professionals only.
  • Ensure that the designated power supply is adequate for continual usage.

Troubleshooting

ProblemPossible CausesSolution
Power light is on but the unit is not getting hot when you turn the thermostat upIt’s either a defective thermostat or a burnt out heating elementReplace the broken part
Temperature keeps rising on its ownThe thermostat is malfunctioningReplace the thermostat
Power is connected, heat is working but the indicator light is not onThe indicator light is defectiveReplace the indicator light
Unit is plugged in but no indicator light or heat is workingThe electrical connection is not connected well or the fuse is blownCheck the electrical connection to ensure it’s connected properly. Replace the fuse if it’s blown.

ACE Equipment One Year Limited Warranty

Admiral Craft Equipment Corp. (ACE) warrants its equipment against defects in materials and workmanship, subject to the following conditions: ACE Equipment is warranted for one year, effective from the date of purchase by the original owner. A copy of the original receipt or other proof of purchase is required to obtain warranty coverage. This warranty applies to the original owner only, and is not assignable.

For warranty and non-warranty related issues, technical support, purchase replacement parts and warranty registration visit www.admiralcraft.com.

Pros & Cons

Pros

  • Large hot plate for generous portions of food
  • Temperature control that can be adjusted for ideal meal warming
  • LED display for temperature monitoring and ease of use
  • To keep a countertop clear of clutter, store cords.
  • Built with stainless steel for longevity and ease of cleaning

Cons

  • When utilized for an extended length of time, it could use a substantial quantity of electricity.
  • Could require a considerable amount of counter space.

Customer Reviews

Positive reviews of the Adcraft Heated Plate Lowerator LR-2 from users highlight its large heated plate, temperature control that can be adjusted, and sturdy build. Customers have, however, voiced complaints regarding its comparatively expensive price point and excessive electricity use. All things considered, the LR-2 is a sturdy and useful kitchen tool that is well worth the money for people who host parties regularly or have a large family.

PDF

Faqs

What is the operation of the Adcraft Heated Plate Lowerator LR-2 heating mechanism?

To keep plates at the ideal serving temperature, the Adcraft features a heating element that is thermostatically controlled. By heating the internal chamber, the element makes sure that every plate that is kept has the same level of temperature.

Does the Adcraft Heated Plate Lowerator LR-2 have a temperature control system?

There is an adjustable thermostat on the Adcraft. This enables users to customize the temperature according to the kind of food being served and the needs of the plates that are being heated.

What kind of material is used to make the Adcraft Heated Plate Lowerator LR-2?

Premium stainless steel is used in the construction of the Adcraft Heated Plate. This material is appropriate for heavy-duty use in commercial settings since it guarantees longevity, ease of cleaning, and resistance to rust and corrosion.

Exist any safety features on the LR-2?

Indeed, an overheat safety feature keeps the Adcraft Heated from overheating. In order to protect the unit and the plates, this safety feature makes sure that the heating element immediately turns off if it rises above a safe operating temperature.

How much power does the Adcraftrequire?

Adcraft Heated Plate Lowerator LR-2 normally needs a 15-amp electrical outlet and runs on a regular 120V, 60Hz power source. As a result, it works with the majority of commercial kitchen power configurations.

Is it possible to use the LR-2 in a mobile catering setup?

The LR-2 is generally meant to be used stationary in commercial kitchens, but it can also be used mobilely provided a safe power source is present and the device is handled properly to avoid damage during transit.

How long can I keep food warm in the Adcraft Heated Plate Lowerator LR-2?

The Adcraft can keep food warm for several hours, depending on the temperature setting and the amount of food being served.

Does the Adcraft come with a warranty?

Adcraft Heated Plate Lowerator LR-2 comes with a limited warranty, which covers defects in materials and workmanship for a specified period.

How should I fill the LR-2 with plates?

The adjustable lowerator tubes are filled with plates that are loaded from above. Access to hot plates is made simple and secure by the spring-loaded system that dispenses the plates one at a time from the bottom.

Does the Adcraft Heated Plate Lowerator LR-2 have an indication light?

There is an indicator light on the Adcraft that indicates when the heating element is operating. This helps avoid unintentional burns or overheating by giving a visual cue that the unit is functioning properly.

Riflescope 2.5 Red Laser

Exerpeutic Folding Exercise Bike PW-1200

Leave a Comment

Name

Email

Comment