Introduction

The FoMAKO PTZ Camera with AI Auto Tracking HDMI is a state-of-the-art camera designed for professional use. This camera features advanced AI auto-tracking technology, which can track and follow a moving object with precision. It also supports HDMI output, making it an ideal choice for live events, conferences, and broadcasting. The estimated price of this product is around $500, and it is expected to launch in the market soon.

Detailed Specifications

The FoMAKO PTZ Camera comes with the following key features:

AI Auto Tracking technology
HDMI output
1080p resolution
30x optical zoom
Pan/Tilt range of 340°/120°
Supports PoE+ (Power over Ethernet Plus)
Built-in microphone
IP66 weatherproof rating
Supports RS485, RS232, and Pelco-D protocols
Compatible with VISCA, PELCO-P, and PELCO-D control systems

Attentions

Improper operations may damage the product structure and result in mechanical failure. Please note the following tips:

Do not move the camera by grabbing the head.
Move the camera by holding the bottom with one or both hands.
Please do not rotate the lens and holder manually, whether the camera is powered on or off; otherwise, it may damage the camera structure and result in the failure of camera self-check and the inability to start the camera.

This manual introduces functions, installations, and operations for this PTZ camera in detail. Please read this manual carefully before installation and use.

Cautions

Avoid damage to the product caused by heavy pressure, strong vibration, or immersion during transportation, storage, and installation.
The housing of this product is made of organic materials. Do not expose it to any liquid, gas, or solids which may corrode the shell.
Do not expose the product to rain or moisture.
To prevent the risk of electric shock, do not open the case. Installation and maintenance should only be carried out by qualified technicians.
Do not use the product beyond the specified temperature, humidity, or power supply specifications.
Wipe it with a soft, dry cloth when cleaning the camera lens. Wipe it gently with a mild detergent if needed. Do not use strong or corrosive detergents to avoid scratching the lens and affecting the image.
This product contains no parts that can be maintained by users themselves. Any damage caused by dismantling the product by the user without permission is not covered by warranty.

Electrical Safety

Installation and use of this product must strictly comply with local electrical safety standards. The power supply of the product is ±12V, and the max electrical current is 2A.

FoMAKO PTZ Camera with AI Auto Tracking HDMI Install

Do not rotate the camera head violently, otherwise, it may cause mechanical failure.
This product should be placed on a stable desktop or other horizontal surface. Do not install the product obliquely, otherwise, it may display an inclined image.
Ensure there are no obstacles within the rotation range of the holder.
Do not power on before complete installation.

Magnetic Interference

Electromagnetic fields at specific frequencies may affect the video image. This product is Class A. It may cause radio interference in household applications. Appropriate measures are required.

Camera Introduction

Camera Lens
Power Light
Status Light
Infrared Receiver
Reserved Mounting Hole
Tripod Screw Hole
Screw Hole for Tripod
Safe Lock
3G-SDI Output Interface
HDMI Output Interface
USB2.0 Interface (U disk storage)
LAN（NDI） Port
DC12V Input Power Supply Socket
Power Switch
Rotary DIP Switch
RS232 Control Interface (input)
RS232 Control Interface (output)
RS485 Input (left +, right -)
RS422 Input
Audio Input Interface (Line-in)
CVBS Output Interface (Reserved)

Interfaces and Connection

After power on and self-checking, the camera will automatically return to the preset 0 position if it’s pre-set.
The default address for the IR remote control is 1#. If the menu is restored to factory defaults, the remote control address will restore to 1#.

Description

The FoMAKO PTZ Camera is a high-performance camera designed for professional use. It features advanced AI auto-tracking technology, which can track and follow a moving object with precision. This camera supports HDMI output, making it an ideal choice for live events, conferences, and broadcasting. It has a 1080p resolution and a 30x optical zoom, providing clear and sharp images. The pan/tilt range of 340°/120° allows for a wide range of motion, making it suitable for large venues. This camera also supports PoE+ (Power over Ethernet Plus), making it easy to install and use. The built-in microphone and IP66 weatherproof rating make it suitable for outdoor use. It is compatible with VISCA, PELCO-P, and PELCO-D control systems, providing flexibility and versatility.

Mounting Brackets

Notes: Ceiling or wall mounting brackets can only be mounted on a template and concrete wall. For safety reasons, plasterboard is not recommended.

Wall Mounting

Ceiling Mounting

Product Overview

Model

Dimension of FoMAKO PTZ Camera with AI Auto Tracking HDMI

Accessory

Please check below standard and optional accessories when unpacking the box.

Standard Accessory	Optional Accessory
Power adapter	Wireless RemoteControl
IR RemoteControl	Wall Mount
RS232 Cable	Ceiling Mount
User Manual

RS-232 Interface

RS-232 Interface Definition

RS232 Mini-DIN 8-pin Port Definition

NO.	Port	Definition
1	DTR	Data Terminal Ready
2	DSR	Data Set Ready
3	TXD	Transmit Data
4	GND	Signal Ground
5	RXD	Receive Data
6	GND	Signal Ground
7	IR OUT	IR Commander Signal
8	NC	No Connection

RS232 (DB9) Port Definition

NO.	Port	Definition
1	DCD	Data Carrier Detect
2	RXD	Receive Data
3	TXD	Transmit Data
4	DTR	Data Terminal Ready
5	GND	System Ground
6	DSR	Data Set Ready
7	RTS	Request to Send
8	CTS	Clear to Send
9	RI	Ring Indicator

VISCA networking as shown below

Note: The camera has RS232 input and output interfaces, which can be cascaded according to the above methods.

Rotary DIP Switch

Dial-up	video format	Dial-up	video format
0	1080P60	8	720P30
1	1080P50	9	720P25
2	1080I60	A	1080P59.94
3	1080I50	B	1080I59.94
4	720P60	C	720P59.94
5	720P50	D	1080P29.97
6	1080P30	E	720P29.97
7	1080P25	F	video formatto be set on the menu

Note: After the video format is modified by rotating the dial code, it can take effect after power off and restart. Turn the dial to F, power off and restart, the menu can display the video format.

Main Features

This series of cameras have perfect functions, superior performance, and rich video output interfaces; Featuring advanced ISP processing algorithms, offering vivid and high-resolution video with a strong sense of depth and fantastic color rendition. It supports H.264/H.265 encoding, which makes motion video more fluent and clear under low bandwidth conditions.

Full HD Resolution: 1/2.8 inch high-quality CMOS sensor. The resolution is up to 1920x1080 with a frame rate of up to 60fps.
Multiple Optical Zoom Lens: 10X/12X/20X/30X optical zoom lens. The 5X zoom camera is with 72.5°FOV without distortion.
Leading Auto Focus Technology: Fast, accurate, and stable auto-focusing technology.
Low Noise and High SNR: Super high SNR image is achieved with low noise CMOS. Advanced 2D/3D noise reduction technology further reduces the noise while ensuring high image clarity.
Multiple Video Output Interfaces: HDMI, SDI, LAN; Simultaneously output audio and video signal via HDMI, SDI, and LAN; SDI output could reach up to 100M with 1080P@60fps
Multiple Audio/Video Compression Standards: Support H.264/H.265 video compression, up to 1920×1080 resolution 60fps; support AAC, MP3, and G.711A audio compression, 16000, 32000, 44100, 48000 sampling frequency
Video / Audio Record and Store: USB2.0 interface supports U disk storage, real-time record and store (USB port can't use as USB signal out. If you want to use this camera as a USB camera, you need an SDI/HDMI to USB video capture card)
Built-in Gravity Sensor: Support PTZ auto-flip function and easy installation.
Multiple Network Protocol: Support ONVIF, GB28181, RTSP, RTMP, VISCA OVER IP, IP VISCA, RTMPS, SRT, NDI protocols; Support RTMP push mode, easy to be connected to a streaming server (Wowza, FMS); Support RTP multicast mode; Support network full command VISCA control protocol.
Control Interface: RS422, RS485, RS232 (cascade connection)
Multiple Control Protocol: Support VISCA, PELCO-D, PELCO-P protocols; Support automatic identification protocols.
Quiet Pan / Tilt Movement: With high accuracy step driving motor, the camera can pan / tilt extremely quiet and smooth.
Sleep function with low power: Support sleep/wake up function with low power consumption, less than 400mw.
Multiple Presets: Up to 255 presets (10 presets via remote control).
IR Remote Control: Users can use IR remote control to control the camera, can also do menu settings by HDMI and SDI Connection to display the device. (LAN connection can't use menu setting by IR Remote Control)
Multiple Applications: Online-education, Lecture Capture, Webcasting, Video conferencing, Tele-medicine.

Technical Parameter

Model	10X	12X	20X	30X
Camera Parameter
Optical Zoom	10X f＝4.7-47mm	12X f＝3.9-46.8mm	20X 5.2-98mm	30X f＝4.3-129mm
Sensor	1/2.8 inch high quality HD CMOS sensor
Effective Pixels	16: 9, 2.07 megapixel
Video Format	HDMI/SDI Output: 1080P60,1080P50,1080I60,1080I50,1080P30,1080P25, 720P60, 720P50
View Angle	60.9°(W) 6.43°(T)	72.5°(W) 6.3°(T)	55.8° (W) 3.2°(T)	65.1°(W) 2.34°(T)
AV	F1.6 – F3.0	F1.8 – F2.4	F1.5～ F3.0	F1.6 – F4.7
Digital Zoom	10X
Minimum Illumination	0.5 Lux (F1.8,AGC ON)
DNR	2D & 3D DNR
White Balance	Auto / Manual/One Push/ Specify color temperature
Focus Mode	Auto/Manual/One Push Focus
Exposure Mode	Auto/Manual/Shutter Priority, Aperture Priority, Brightness Priority

Iris	Auto/Manual
Electronic Shutter	Auto/Manual
BLC	ON/OFF
WDR	OFF/ Dynamic leveladjustment
Video Adjustment	Brightness, Color, Saturation, Contrast, Sharpness, B/W mode, Gammacurve
SNR	>55 dB
Input/Output Interface
Video Interfaces	HDMI, SDI, LAN(POE、NDI), RS232-IN/OUT, RS422, RS485, A-IN, USB2.0(U-disk storage)
Video Output	HDMI, SDI, LAN
Video Stream	Dual stream output
Video Format	Main Stream: 1920×1080, 1280×720, 640×480 Sub Stream: 1280×720, 640×480, 640×360, 320×240, 320×180
VideoBitrate	64Kbps～40960Kbps
Video Compression Format	H.265, H.264
Audio Input Interface	Double track 3.5mmlinear input
Audio Output Interface	HDMI, SDI, LAN
Audio Compression Format	AAC/MP3/G.711A
AudioBitrate	32Kbps, 48Kbps, 64Kbps,96Kbps, 128Kbps
Network Interface	100M Ethernet port（10/100BASE-TX）
Control Interface	RS232 (IN/OUT), RS485,RS422
Control Protocol	VISCA/Pelco-D/Pelco-P, Baud Rate: 115200/38400/9600/4800/2400bps
Power Interface	HEC3800 outlet (DC12V)
Power Supply	Input AC110V-AC220V; OutputDC12V/2.0A
Input Voltage	DC12V±10%
Input Current	Maximum: 1A
Power Consumption	Maximum: 12W
Network Protocols	TCP/IP, RTSP, RTMP,VISCA OVER IP,IP VISCA, RTMPS,SRT, NDI, ONVIF,GB/T28181; Support Network VISCA control protocol； Support remote upgrade, reboot and reset
PTZ Parameter
Pan/Tilt Rotation	±170°, -30°～+90°
Pan Control Speed	1.4 - 40°/sec
Tilt Control Speed	2.9 - 30°/sec
Preset Speed	Pan: 40°/sec, Tilt:30°/sec
Preset Accuracy	±0.1°
Preset Number	255 presets (10 presets via remote control)
Other Parameter
Stored Temperature	-10℃~+60℃
Stored Humidity	20%~95%
Working Temperature	-10℃~+50℃
Working Humidity	20%~80%
Dimension	143mm×176mm×169mm
Weight	1.3KG
Accessory

Package	Power Supply, RS232Control Cable, IR Remote Control, User Manual
Optional Accessories	Ceiling / wall Mount (Extra Cost)

Remote Control

Keys Introduction for IR Remote Control

After the camera starts normally, it receives and executes the infrared command. Press the button of the remote control, the remote control receiving indicator light flashes green, release the button, the indicator light stops flashing. You can use the infrared remote control to perform operations such as preset position setting, positioning, leveling, and tilting.

In this manual, “press the key” means a click rather than a long press, and a special note will be given if a long press for more than one second is required.

When a key combination is required, do it in sequence. For example, “【】+【#】+【F1】” means press “【】” first and then press “【#】” and lastly press “【F1】”.

Standby Key
The camera enters standby mode if long press 3s on standby key; Long press 3s again on the standby key, the camera will self-check again and return to the HOME position (If preset 0 position is set, the camera will return to preset 0 position without operation within 12s).
Camera Selection
- Select the camera address to control.
Focus Control
- Auto: auto focus mode
- Manual: manual focus mode
- Focus + (near): Press 【FOCUS +】key (Valid only in manual focus mode)
- Focus - (far): Press 【FOCUS -】key (Valid only in manual focus mode) Press and hold the keys, the action of focus will keep continue and stop as soon as the key is released.
Zoom Control
- ZOOM +: press 【ZOOM +】key to zoom in
- ZOOM -: press 【ZOOM -】key to zoom out Press and hold the keys, the action of focus will keep continue and stop as soon as the key is released.
Set and Clear Presets
- Set Preset: press 【SET PRESET button, and then press the number key 0-9 to set preset positions. Note: 10 presets via remote control.
- Call Preset: Press a number key 0-9 directly to call a preset position.
  Note: If the number key is not preset, it is invalid. Clear Preset: press 【CLEAR PRESET】button, and then press the number key 0-9 to clear preset positions.
  Note : press the【#】key three times continually to clear all presets.
Pan/Tilt Control
- Up: press
- Down: press
- Left: press
- Right: press
- Back to middle position: press “【HOME】”
- Press and hold the up/down/left/right key, the pan/tilt movements will keep running, from slow to fast, until it runs to the endpoint; stop as soon as the key is released.
Menu Setting
- 【MENU】: Open / close the OSD menu
- 【HOME】: Camera lens back to the middle position; Confirm button; Enter next menu
- 【↑】【↓】：Choose item
- 【←】【→】：Modify values
- 【BLC ON/OFF】：Turn on or off the back light compensation
Camera Remote Control Address Setting
- 【*】+【＃】+【F1】:Camera Address No.1
- 【*】+【＃】+【F2】:Camera Address No. 2
- 【*】+【＃】+【F3】:Camera Address No. 3
- 【*】+【＃】+【F4】:Camera Address No. 4
Key Combination

【#】+【#】+【#】: Clear all presets
【*】+【#】+【6】: Restore factory defaults
【*】+【#】+【3】: Menu set to Chinese
【*】+【#】+【4】: Menu set to English
【*】+【#】+【9】: Flip switch
【*】+【#】+Auto: Enter aging mode
【#】+【*】+Auto: Exit aging mode
【*】+【#】+Manual: Restore the default user name, password, and IP address
【#】+【#】+【0】: Switch the video format to 1080P60
【#】+【#】+【1】: Switch the video format to 1080P50
【#】+【#】+【2】: Switch the video format to 1080I60
【#】+【#】+【3】:Switch the video format to 1080I50
【#】+【#】+【4】: Switch the video format to 720P60
【#】+【#】+【5】:Switch the video format to 720P50
【#】+【#】+【6】:Switch the video format to 1080P30
【#】+【#】+【7】: Switch the video format to 1080P25
【#】+【#】+【8】:Switch the video format to 720P30
【#】+【#】+【9】:Switch the video format to 720P25
Note: If the address of former remote control is not address 1 but another one from 2, 3, 4, the corresponding camera address will restore to address 1 when all parameters are restored to factory default. User should change the remote control address to address 1.

Menu Introduction

Note: The modification valid only if exit the menu before save and power off.

Menu Control
【MENU】: Enter / exit the OSD menu or return to the previous menu
【HOME】: Enter next menu
【↑】【↓】：Choose item
【←】【→】：Modify values
English Menu

Network Configuration

Network Connection
(Network connection is a little difficult for new users, if you can't get success, please email us: ivan@fomako.net , we will email you more detail video or PDF instructions)

Direct connection: Connect the camera and computer by network connecting cable.
Internet connection mode: Connect the camera to Internet by Router or Switcher and user can login the device by browser web page.

Note: Please do not put the power cable and network cable in places where can be easily touched, to prevent video unstable signal transmission due to poor contact of cables.

Add network segment method

The computer must have the network segment where the camera IP address belongs to. The device will not be accessible if without the segment.
The camera default IP address is 192.168.5.163, segment 5 must be added in the computer.
Firstly open the window of Local Area Connection Properties on computer, select the “Internet protocol version 4(TCP/IPv4)”. Double click or click the property “Internet” protocol version 4 (TCP/IPv4) to enter into the Internet Protocol Version 4(TCP/IPv4) Properties window; select “Advanced” to enter into the Advanced TCP/IP Setting and add IP and subnet mask. Click the “Confirm” to finish the adding of IP segment. User can add the corresponding network segment according to the revised IP address of the camera.
Note: The IP address to be added cannot be same with that of other computers or devices. The existence of this IP address needs to be verified before adding.
To verify whether the network segment has been successfully added, click the “Start” and select “Operation” to input cmd, then click CONFIRM and open DOS command window, ping 192.168.5.26 and press Enter key to display information as shown below:

After camera power on and self-check, follow the steps above to verify network connection. Open DOS command window, ping 192.168.5.163 and press Enter key.

Web Login

Web Client Login
Input the default IP address 192.168.5.163 in the browser and click Enter button to enter into Web Client login page. User can login as administrator and normal user. If login as administrator (Default User name/Password: admin), users can preview, playback, and set configuration in the Web Client; If login in as normal user (Default User name/Password: user1 or user2), users can only preview, playback and logout, no option for configuration. Language Selection: click Chinese/English in the upper right corner of the login page to select the language type of the web interface.
Web page login
Enter user name and password, click and Sign (initial default user name and password: "admin", users can change the user name and password on their own after entering) into the Web client management interface.

Streaming

Video Stream Capture

Configurations -> Video Configure-> Video Encode
Configure the parameters according to the network environment.
Note: stream name live/av0 (live/ XXX)
For example: The default IP address of the camera is 192.168.5.163. The way to obtain the RTSP video stream is as below rtsp://192.168.5.163:554/live/av0（av0 main stream） rtsp://192.168.5.163:554/live/av1 （av1 sub stream）
The default IP address of the camera is 192.168.5.163. the way to obtain RTMP video stream is as below rtmp://192.168.5.163:1935/live/av0（av0 main stream） rtmp://192.168.5.163:1935/live/av1（av1 sub stream）
Configurations > Network Configure> SRT
Configure the parameters according to the network environment; the default IP address of the camera is 192.168.5.163, and the way to obtain the SRT video stream is as follows: srt://192.168.5.163:9000

Push Video Stream

Configurations -> Video Configure-> Stream Publish

Push RTMP stream to public network server, the stream camera IP must be on the public network, otherwise it will fail to connect to server.
Host address: server address, which can be either a domain name or an IP address
Host port: server default port number
Stream name: live/test (live/ XXX) Username and password: the username and password set by the server, or leave it empty
Access url：rtmp://host domain name: host port/live/xxx Or (rtmp: //host IP address: host port/live/xxx)

NDI Configuration (for NDI camera only)
Configurations -> Video Configure-> NDI

Click the NDI enable switch and restart the camera to use the NDI function.

Software Upgrading

Log in to the web page and manage camera settings. The default page is preview interface, where users cam PTZ control, record video, preset camera positions and etc.
Configurations -> System Configure-> Update
Click "browse" to select .mrg update file, then click upgrade button to finish software upgrading.
Camera reboot after completion of firmware update. It prompts with "successful upgrade". Log in to check the firmware version to make sure software upgrade successful. Then click "restore factory default", reboot and restore parameters to factory default (default IP 192.168.5.163, user name: admin; password admin).

Serial Port Communication and Control

The camera could be controlled through RS232/RS485/RS422 interface; RS232 serial parameter are as follows:
Baud rate: 2400/4800/9600/115200 bits / sec; Start bit: 1; data bits: 8; Stop bit: 1; Parity: None. After power on, the camera first goes left, then back to the middle position. Self-test is finished after the zoom moved to the farthest and then back to the nearest position. If the camera saved 0 preset before, it will be back to that position after initialization. At this point, the user can control the camera by the serial commands.

VISCA Protocol Return Command

Ack/Completion Message
	Command Packet	Note
ACK	z0 41 FF	Returned when the command is accepted.
Completion	z0 51 FF	Returned when the command has been executed.

Error Messages
	Command Packet	Note
Syntax Error	z0 60 02 FF	Returned when the command format is different or when a command with illegal command parameters is accepted
Command Not Executable	z0 61 41 FF	Returned when a command cannot be executed due to current conditions. For example, when commands controlling the focus manually are received during auto focus

VISCA Protocol Control Command

Command	Function	Command Packet	Note
AddressSet	Broadcast	88 30 0p FF	p：Address setting
IF_Clear	Broadcast	88 01 00 01 FF	I/F Clear
CAM_Power	On	8x 01 04 00 02 FF	Power ON/OFF
CAM_Power	Off	8x 01 04 00 03 FF	Power ON/OFF
CAM_Zoom	Stop	8x 01 04 07 00 FF
	Tele(Standard)	8x 01 0407 02 FF
	Wide(Standard)	8x 01 0407 03 FF
	Tele(Variable)	8x 01 04 07 2p FF	p = 0(low) - F(high)
	Wide(Variable)	8x 01 0407 3p FF	p = 0(low) - F(high)
	Direct	8x 01 04 47 0p 0q 0r 0s FF	pqrs: Zoom Position
CAM _Focus	Stop	8x 01 04 08 00 FF
	Far(Standard)	8x 01 0408 02 FF
	Near(Standard)	8x 01 0408 03 FF
	Far(Variable)	8x 01 04 08 2p FF	p = 0(low) - F(high)
	Near (Variable)	8x 01 0408 3p FF	p = 0(low) - F(high)
	Direct	8x 01 04 48 0p 0q 0r 0s FF	pqrs: Focus Position
	Auto Focus	8x 01 04 38 02 FF
	Manual Focus	8x 01 0438 03 FF
	One Push mode	8x 01 0438 04 FF
CAM _Zoom Focus	Direct	8x 01 04 47 0p 0q 0r 0s 0t 0u 0v 0w FF	pqrs: Zoom Position tuvw: Focus Position
CAM_AFSensitivity	High	8x 01 04 58 01 FF	Focus sensitivity Setting
	Normal	8x 01 0458 02 FF
	Low	8x 01 0458 03 FF
CAM_AFZone	Top	8x 01 04 AA 00 FF	Focus RegionSetting
	Center	8x 01 04 AA 01 FF
	Bottom	8x 01 04 AA 02 FF
	ALL	8x1 01 04 AA 03 FF
CAM_WB	One Push mode	8x 01 04 35 03 FF
	One Push Trigger	8x 01 0410 05 FF	One Push WB Trigger(Enabled during One Push WB mode)
	CAM_WB Mode	8x 01 04 35 pq FF	pq = 00--33WBMode
CAM_AWBSensitivity	Low	8x 01 04 A9 00 FF	WB Sensitivity Setting
	Normal	8x 01 04 A9 01 FF
	High	8x 01 04 A9 02 FF
CAM _RGain	Reset	8x 01 0403 00 FF	Manual Control of R Gain
	Up	8x 01 0403 02 FF
	Down	8x 01 0403 03 FF
	Direct	8x 01 04 43 00 00 0p 0q FF	pq: R Gain
CAM_ Bgain	Reset	8x 01 0404 00 FF	Manual Control of B Gain

Command	Function	Command Packet	Note
	Up	8x 01 0404 02 FF
	Down	8x 01 04 04 03 FF
	Direct	8x 01 04 44 00 00 0p 0q FF	pq: B Gain
CAM_AE	Full Auto	8x 01 0439 00 FF	AutomaticExposure mode
	Manual	8x 01 0439 03 FF	Manual Control mode
	Shutter priority	8x 01 04 39 0A FF	Shutter Priority Automatic Exposure mode
	Iris priority	8x 01 04 39 0B FF	Iris Priority Automatic Exposure mode
	Bright	8x 01 04 39 0D FF	Bright mode
CAM_Shutter	Reset	8x 01 04 0A 00 FF	Shutter Setting
	Up	8x 01 04 0A 02 FF
	Down	8x 01 04 0A 03 FF
	Direct	8x 01 04 4A 00 00 0p 0q FF	pq: Shutter Position
CAM_Iris	Reset	8x 01 04 0B 00 FF	Iris Setting
	Up	8x 01 04 0B 02 FF
	Down	8x 01 04 0B 03 FF
	Direct	8x 01 04 4B 00 00 0p 0q FF	pq: Iris Position
CAM_Gain Limit	Reset	8x 01 04 0C 00 FF	Gain LimitSetting
	Up	8x 01 04 0C 02 FF
	Down	8x 01 04 0C 03 FF
	Gain Limit	8x 01 04 2C 0p FF	p: Gain Positon
CAM_Bright	Reset	8x 01 04 0D 00 FF	Bright Setting
	Up	8x 01 04 0D 02 FF
	Down	8x 01 04 0D 03 FF
	Direct	8x 01 04 4D 00 00 0p 0q FF	pq: Bright Positon
CAM_ExpComp	On	8x 01 04 3E 02 FF	Exposure Compensation ON/OFF
	Off	8x 01 04 3E 03 FF	Exposure Compensation ON/OFF
	Reset	8x 01 04 0E 00 FF	Exposure Compensation AmountSetting
	Up	8x 01 04 0E 02 FF
	Down	8x 01 04 0E 03 FF
	Direct	8x 01 04 4E 00 00 0p 0q FF	pq: ExpComp Position
CAM_Back Light	On	8x 01 0433 02 FF	Back Light Compensation
CAM_Back Light	Off	8x 01 0433 03 FF	Back Light Compensation
CAM_WDRStrength	Reset	8x 01 04 21 00 FF	WDR Level Setting
	Up	8x 01 0421 02 FF
	Down	8x 01 0421 03 FF
	Direct	8x 01 04 51 00 00 00 0p FF	p: WDR LevelPositon
CAM_NR	2D	8x 01 04 53 0p FF	P=0-7 0:OFF
CAM_NR	3D	8x 01 04 54 0p FF	P=0-8 0:OFF
CAM_Gamma		8x 01 04 5B 0p FF	p = 0 – 4 0：Default 1：0.452：0.50 3：0.55 4：0.63
CAM_Low-Light Mode	ON	8x 01 04 2D 01 FF	Low-Light ModeSetting
CAM_Low-Light Mode	OFF	8x 01 04 2D 00 FF	Low-Light ModeSetting
CAM_Flicker	OFF	8x 01 0423 00 FF	OFF
	50HZ	8x 01 0423 01 FF	50HZ
	60HZ	8x 01 04 23 02 FF	60HZ
CAM_Aperture	Reset	8x 01 04 02 00 FF	Aperture Control
	Up	8x 01 04 02 02 FF
	Down	8x 01 04 02 03 FF
	Direct	8x 01 04 42 00 00 0p 0q FF	pq: Aperture Gain

Command	Function	Command Packet	Note
CAM_PictureEffect	B&W-Mode	8x 01 0463 04 FF	PictureEffect Setting
CAM_PictureEffect	OFF	8x 01 04 63 00 FF	PictureEffect Setting
CAM_Memory	Reset	8x 01 04 3F 00 pq FF	pq: Memory Number(=0 to 254) Corresponds to 0 to 9 on the Remote Commander
	Set	8x 01 04 3F 01 pq FF
	Recall	8x 01 04 3F 02 pq FF
CAM_LR_Reverse	On	8x 01 04 61 02 FF	Image FlipHorizontal ON/OFF
CAM_LR_Reverse	Off	8x 01 0461 03 FF	Image FlipHorizontal ON/OFF
CAM_PictureFlip	On	8x 01 0466 02 FF	Image Flip Vertical ON/OFF
CAM_PictureFlip	Off	8x 01 04 66 03 FF	Image Flip Vertical ON/OFF
CAM_ColorSaturation	Direct	8x 01 0449 00 00 00 0p FF	P=0-E 0:60% 1:70% 2:80% 3:90% 4:100% 5:110% 6:120% 7:130% 8:140% 9:150% 10:160% 11:160% 12:180% 13:190% 14:200%
CAM_IDWrite		8x 01 04 22 0p 0q 0r 0s FF	pqrs: Camera ID (=0000 to FFFF)
SYS_Menu	ON	8x 01 04 06 0602 FF	Turn on themenu screen
SYS_Menu	OFF	8x 01 04 06 0603 FF	Turn off the menu screen
IR_Receive	ON	8x 01 0608 02 FF	IR(remote commander)receive On/Off
IR_Receive	OFF	8x 01 06 08 03 FF	IR(remote commander)receive On/Off
IR_ReceiveReturn	On	8x 01 7D 01 03 00 00 FF	IR(remote commander)receive message via the VISCA communication ON/OFF
IR_ReceiveReturn	Off	8x 01 7D 01 13 00 00 FF
CAM_SettingReset	Reset	8x 01 04 A0 10 FF	Reset Factory Setting
CAM_Brightness	Direct	8x 01 04 A1 00 00 0p 0q FF	pq: Brightness Position
CAM_Contrast	Direct	8x 01 04 A2 00 00 0p 0q FF	pq: Contrast Position
CAM_Flip	OFF	8x 01 04 A4 00 FF	Single Command For Video Flip
	Flip-H	8x 01 04 A4 01 FF
	Flip-V	8x 01 04 A4 02 FF
	Flip-HV	8x 01 04 A4 03 FF
CAM_VideoSystem	Set camera video system	8x 01 0635 00 0p FF	P: 0~E Video format 0:1080P60 1:1080P50 2:1080i60 3:1080i50 4:720P60 5:720P50 6:1080P30 7:1080P25 A:1080P59.94 B:1080I59.94 C:720P59.94 D:1080P29.97 E:720P29.97
Pan_tiltDrive	Up	8x 01 06 01 VV WW 03 01 FF	VV: Pan speed0x01 (low speed)to 0x18 (high speed) WW: Tilt speed 0x01 (low speed)to 0x14 (high speed) YYYY: Pan Position ZZZZ: Tilt Position
	Down	8x 01 06 01 VV WW 03 02 FF
	Left	8x 01 06 01 VV WW 01 03 FF
	Right	8x 01 06 01 VV WW 02 03 FF
	Upleft	8x 01 06 01 VV WW 01 01 FF
	Upright	8x 01 06 01 VV WW 02 01 FF
	DownLeft	8x 01 06 01 VV WW 01 02 FF
	DownRight	8x 01 06 01 VV WW 02 02 FF
	Stop	8x 01 06 01 VV WW 03 03 FF
	AbsolutePosition	8x 01 06 02 VVWW 0Y 0Y 0Y 0Y 0Z 0Z 0Z 0Z FF
	RelativePosition	8x 01 06 03 VVWW 0Y 0Y 0Y 0Y 0Z 0Z 0Z 0Z FF
	Home	8x 01 06 04 FF
	Reset	8x 01 06 05 FF

Command

Function

Command Packet

Note

Pan-tiltLimitSet

Set

8x 01 06 07 00 0W

0Y 0Y 0Y 0Y 0Z 0Z 0Z 0Z FF

W:1 UpRight 0:DownLeft YYYY: Pan Limit Position(TBD) ZZZZ: Tilt Limit Position(TBD)

Clear

8x 01 06 07 01 0W

07 0F 0F 0F 07 0F 0F 0F FF

VISCA Protocol Inquiry Command

Command	Command Packet	Return Packet	Note
CAM_PowerInq	8x 09 04 00 FF	y0 50 02 FF	On
CAM_PowerInq	8x 09 04 00 FF	y0 50 03 FF	Off(Standby)
CAM_ZoomPosInq	8x 09 04 47 FF	y0 50 0p 0q 0r 0s FF	pqrs: Zoom Position
CAM_FocusAFModeInq	8x 09 04 38 FF	y0 50 02 FF	Auto Focus
		y0 50 03 FF	Manual Focus
		y0 50 04 FF	One Push mode
CAM_FocusPosInq	8x 09 04 48 FF	y0 50 0p 0q 0r 0s FF	pqrs: Focus Position
CAM_AFSensitivityInq	8x 09 04 58 FF	y0 50 01 FF	High
		y0 50 02 FF	Normal
		y0 50 03 FF	Low
CAM_AFZoneInq	8x 09 04 AAFF	y0 50 00 FF	Top
		y0 50 01 FF	Center
		y0 50 02 FF	Bottom
		y0 50 03 FF	All
CAM_WBModeInq	8x 09 04 35 FF	y0 50 pq FF	Auto
CAM_WBModeInq	8x 09 04 35 FF		pq =WBMode
CAM_AWBSensitivityInq	8x 09 04 A9 FF	y0 50 00 FF	Low
		y0 50 01 FF	Normal
		y0 50 02 FF	High
CAM_RGainInq	8x 09 04 43 FF	y0 50 0B FF	7000K
CAM_BGainInq	8x 09 04 44 FF	y0 50 00 00 0p 0q FF	pq: B Gain
CAM_AEModeInq	8x 09 04 39 FF	y0 50 00 FF	Full Auto
		y0 50 03 FF	Manual
		y0 50 0A FF	Shutter priority
		y0 50 0B FF	Iris priority
		y0 50 0D FF	Bright
CAM_ShutterPosInq	8x 09 04 4A FF	y0 50 00 00 0p 0q FF	pq: Shutter Position
CAM_IrisPosInq	8x 09 04 4B FF	y0 50 00 00 0p 0q FF	pq: Iris Position
CAM_Gain LimitInq	8x 09 04 2C FF	y0 50 0p FF	p: Gain Positon
CAM_ BrightPosiInq	8x 09 04 4D FF	y0 50 00 00 0p 0q FF	pq: Bright Position
CAM_ExpCompModeInq	8x 09 04 3E FF	y0 50 02 FF	On
CAM_ExpCompModeInq	8x 09 04 3E FF	y0 50 03 FF	Off
CAM_ExpCompPosInq	8x 09 04 4E FF	y0 50 00 00 0p 0q FF	pq: ExpComp Position
CAM_BacklightModeInq	8x 09 04 33 FF	y0 50 02 FF	On
CAM_BacklightModeInq	8x 09 04 33 FF	y0 50 03 FF	Off
CAM_WDRStrengthInq	8x 09 04 51 FF	y0 50 0p FF	p: WDR Strength
CAM_NRLevel(2D) Inq	8x 09 04 53 FF	y0 50 0p FF	P: 2DNRLevel
CAM_NRLevel(3D) Inq	8x 09 04 54 FF	y0 50 0p FF	P:3D NRLevel
CAM_FlickerModeInq	8x 09 04 55 FF	y0 50 0p FF	p: Flicker Settings(0: OFF, 1: 50Hz, 2:60Hz)
CAM_ApertureInq	8x 09 04 42 FF	y0 50 00 00 0p 0q FF	pq: Aperture Gain
CAM_PictureEffectModeInq	8x 09 04 63 FF	y0 50 00 FF	Off
CAM_PictureEffectModeInq	8x 09 04 63 FF	y0 50 04 FF	B&W
CAM_MemoryInq	8x 09 04 3F FF	y0 50 0p FF	p: Memory numberlast operated.
SYS_MenuModeInq	8x 09 06 06 FF	y0 50 02 FF	On
SYS_MenuModeInq	8x 09 06 06 FF	y0 50 03 FF	Off
CAM_LR_ReverseInq	8x 09 04 61 FF	y0 50 02 FF	On
CAM_LR_ReverseInq	8x 09 04 61 FF	y0 50 03 FF	Off
CAM_PictureFlipInq	8x 09 04 66 FF	y0 50 02 FF	On
CAM_PictureFlipInq	8x 09 04 66 FF	y0 50 03 FF	Off
CAM_ColorSaturationInq	8x 09 04 49 FF	y0 50 00 00 00 0p FF	p: Color Gainsetting 0h (60%)to Eh (130%)
CAM_IDInq	8x 09 04 22 FF	y0 50 0p FF	p: Gamma ID
IR_ReceiveInq	8x 09 06 08 FF	y0 50 02 FF	On

		y0 50 03 FF	Off
IR_ReceiveReturn		y0 07 7D 01 04 00 FF	Power ON/OFF
		y0 07 7D 01 04 07 FF	Zoom tele/wide
		y0 07 7D 01 04 38 FF	AF ON/OFF
		y0 07 7D 01 04 33 FF	Camera _Backlight
		y0 07 7D 01 04 3F FF	Camera _Memery
		y0 07 7D 01 06 01 FF	Pan_titleDriver
CAM_BrightnessInq	8x 09 04 A1 FF	y0 50 00 00 0p 0q FF	pq: Brightness Position
CAM_ContrastInq	8x 09 04 A2 FF	y0 50 00 00 0p 0q FF	pq: Contrast Position
CAM_FlipInq	8x 09 04 A4 FF	y0 50 00 FF	Off
		y0 50 01 FF	Flip-H
		y0 50 02 FF	Flip-V
		y0 50 03 FF	Flip-HV
CAM_GammaInq	8x 09 04 5B FF	y0 50 0p FF	p: Gamma setting
CAM_Low-LightModeInq	8x 09 04 2D FF	y0 50 00 FF	OFF
CAM_Low-LightModeInq	8x 09 04 2D FF	y0 50 01 FF	ON
CAM_VersionInq	8x 09 00 02 FF	y0 50 ab cd mn pq rs tu vw FF	ab cd : venderID ( 0220 ) mn pq : model ID rs tu : ARM Version vw : reserve
VideoSystemInq	8x 09 06 23 FF	y0 50 0p FF	P: 0~E Video format 0:1080P60 1:1080P50 2:1080i60 3:1080i50 4:720P60 5:720P50 6:1080P30 7:1080P25 A:1080P59.94 B:1080I59.94 C:720P59.94 D:1080P29.97 E:720P29.97
Pan-tiltMaxSpeedInq	8x 09 06 11 FF	y0 50 ww zz FF	ww: Pan Max Speed zz: TiltMax Speed
Pan-tiltPosInq	8x 09 06 12 FF	y0 50 0w 0w 0w 0w 0z 0z 0z 0z FF	wwww: Pan Position zzzz: Tilt Position

Note:[X] in the above table indicates the camera address to be operated,【y】=【x + 8】.

Pelco-D Protocol Command List

Function	Byte1	Byte2	Byte3	Byte4	Byte5	Byte6	Byte7
Up	0xFF	Address	0x00	0x08	Pan Speed	Tilt Speed	SUM
Down	0xFF	Address	0x00	0x10	Pan Speed	Tilt Speed	SUM
Left	0xFF	Address	0x00	0x04	Pan Speed	Tilt Speed	SUM
Right	0xFF	Address	0x00	0x02	Pan Speed	Tilt Speed	SUM
Upleft	0xFF	Address	0x00	0x0C	Pan Speed	Tilt Speed	SUM
Upright	0xFF	Address	0x00	0x0A	Pan Speed	Tilt Speed	SUM
DownLeft	0xFF	Address	0x00	0x14	Pan Speed	Tilt Speed	SUM
DownRight	0xFF	Address	0x00	0x12	Pan Speed	Tilt Speed	SUM
Zoom In	0xFF	Address	0x00	0x20	0x00	0x00	SUM
Zoom Out	0xFF	Address	0x00	0x40	0x00	0x00	SUM
Focus Far	0xFF	Address	0x00	0x80	0x00	0x00	SUM
Focus Near	0xFF	Address	0x01	0x00	0x00	0x00	SUM
Stop	0xFF	Address	0x00	0x00	0x00	0x00	SUM
Set Preset	0xFF	Address	0x00	0x03	0x00	Preset ID	SUM

Clear Preset	0xFF	Address	0x00	0x05	0x00	Preset ID	SUM
Call Preset	0xFF	Address	0x00	0x07	0x00	Preset ID	SUM
Query Pan Position	0xFF	Address	0x00	0x51	0x00	0x00	SUM
Query Pan Position Response	0xFF	Address	0x00	0x59	Value High Byte	Value Low Byte	SUM
Query Tilt Position	0xFF	Address	0x00	0x53	0x00	0x00	SUM
Query Tilt Position Response	0xFF	Address	0x00	0x5B	Value High Byte	Value Low Byte	SUM
Query Zoom Position	0xFF	Address	0x00	0x55	0x00	0x00	SUM
Query Zoom Position Response	0xFF	Address	0x00	0x5D	Value High Byte	Value Low Byte	SUM

Pelco-P Protocol Command List

Function	Byte1	Byte2	Byte3	Byte4	Byte5	Byte6	Byte7	Byte 8
Up	0xA0	Address	0x00	0x08	Pan Speed	Tilt Speed	0xAF	XOR
Down	0xA0	Address	0x00	0x10	Pan Speed	Tilt Speed	0xAF	XOR
Left	0xA0	Address	0x00	0x04	Pan Speed	Tilt Speed	0xAF	XOR
Right	0xA0	Address	0x00	0x02	Pan Speed	Tilt Speed	0xAF	XOR
Upleft	0xA0	Address	0x00	0x0C	Pan Speed	Tilt Speed	0xAF	XOR
Upright	0xA0	Address	0x00	0x0A	Pan Speed	Tilt Speed	0xAF	XOR
DownLeft	0xA0	Address	0x00	0x14	Pan Speed	Tilt Speed	0xAF	XOR
DownRight	0xA0	Address	0x00	0x12	Pan Speed	Tilt Speed	0xAF	XOR
Zoom In	0xA0	Address	0x00	0x20	0x00	0x00	0xAF	XOR
Zoom Out	0xA0	Address	0x00	0x40	0x00	0x00	0xAF	XOR
Stop	0xA0	Address	0x00	0x00	0x00	0x00	0xAF	XOR
Focus Far	0xA0	Address	0x01	0x00	0x00	0x00	0xAF	XOR
Focus Near	0xA0	Address	0x02	0x00	0x00	0x00	0xAF	XOR
Set Preset	0xA0	Address	0x00	0x03	0x00	Preset ID	0xAF	XOR
Clear Preset	0xA0	Address	0x00	0x05	0x00	Preset ID	0xAF	XOR
Call Preset	0xA0	Address	0x00	0x07	0x00	Preset ID	0xAF	XOR
Query Pan Position	0xA0	Address	0x00	0x51	0x00	0x00	0xAF	XOR
Query Pan Position Response	0xA0	Address	0x00	0x59	Value High Byte	Value Low Byte	0xAF	XOR
Query Tilt Position	0xA0	Address	0x00	0x53	0x00	0x00	0xAF	XOR
Query Tilt Position Response	0xA0	Address	0x00	0x5B	Value High Byte	Value Low Byte	0xAF	XOR
Query Zoom Position	0xA0	Address	0x00	0x55	0x00	0x00	0xAF	XOR
Query Zoom Position Response	0xA0	Address	0x00	0x5D	Value High Byte	Value Low Byte	0xAF	XOR

FoMAKO PTZ Camera with AI Auto Tracking HDMI Setup Guide

To set up the FoMAKO PTZ Camera, follow these steps:

Mount the camera on a tripod or wall mount.
Connect the camera to a power source using the included power adapter or PoE+ switch.
Connect the camera to a monitor or TV using an HDMI cable.
Connect the camera to a network using an Ethernet cable (if using PoE+).
Turn on the camera and use the remote control to adjust the settings.
Use the AI auto-tracking feature to track and follow moving objects.

Maintenance

Camera Maintenance

Please power off the camera and disconnect the power adapter and socket if it’s not used for a long period.
Use a soft cloth or tissue to clean the camera cover.
Wipe the camera lens with a soft, dry cloth when cleaning. If needed, gently wipe with a mild detergent. Avoid using strong or corrosive detergents to prevent scratching the lens and affecting video quality.

Troubleshooting

No Video Output
- Check if the camera power supply is connected, the voltage is normal, and the power indicator is lit.
- Verify if the machine performs a self-check after restarting.
- Ensure the DIP switch at the bottom is set to the normal operating mode (refer to Table 2.2 and Table 2.3).
- Check if the video output cable or video display is functioning correctly.
No Image Sometimes
- Verify if the video output cable or video display is normal.
Video Dithering When Zooming In or Out
- Check if the camera installation position is stable.
- Ensure there are no shaking machines or objects around the camera.
Remote Control Not Working
- Set the remote control address to 1 (if the machine is reset to factory defaults, the remote control address must also be reset to 1).
- Check if the battery is installed or if it is low.
- Ensure the menu is closed; camera control through the remote controller is only available after exiting the menu. If video output is from LAN, the menu will not be displayed and will automatically exit 30 seconds later, allowing remote control.
Serial Port Not Working
- Verify the camera serial device protocol, baud rate, and address are consistent.
- Check if the control cable is connected properly.
- Ensure the camera is in the normal operating mode.
Cannot Log In to Web Pages
- Check if the camera outputs video normally by connecting directly to a screen.
- Ensure the network cable is connected properly (Ethernet port yellow light flashes to indicate a normal network cable connection).
- Check if your computer is added to the same network segment and is consistent with the camera’s IP address.
- Open a DOS command window by clicking "Start", selecting "Run", and typing "cmd"; then enter ping 192.168.5.163 and press Enter. A response indicates a normal network connection.
Zoom/Skype and Other Software Can't Recognize the Camera from PC via USB Connection
- Most conference software only recognizes USB cameras. The USB port on this camera is only for recording and storing video. To use this camera as a USB camera, you need an SDI/HDMI to USB video capture card to convert the SDI/HDMI signal to a USB signal (HDMI to USB capture card is recommended for cost-effectiveness).
Can't Transmit Audio
- Log in to the camera's webpage -> Configuration -> Audio Configure -> Enable, then reboot the camera. You can also adjust audio settings here.
Other Unknown Problems
- Please email us at ivan@fomako.net for assistance with any issues.

Example: Streaming to Facebook

Connect the camera to the network and adjust it according to your network environment. You can choose DHCP or set your own IP address and DNS.
Create an event on Facebook and obtain the "stream key" and "server URL."
Fill these parameters into the "host address" and "stream name" of the camera, and change the port to 443.

Pros & Cons

Pros

Advanced AI auto-tracking technology
HDMI output
1080p resolution and 30x optical zoom
Wide pan/tilt range
Supports PoE+
Built-in microphone and IP66 weatherproof rating
Compatible with multiple control systems

Cons

Higher price point compared to some other PTZ cameras.
Needs a stable network connection for optimal performance.

Search Manuals in: ndi

Read More