Introduction of Panasonic Microwave Trim Kit NN-TK932S

The Panasonic Microwave Trim Kit NN-TK932S is the perfect accessory for your Panasonic microwave, designed to give it a seamless and built-in look in your kitchen. This trim kit is specifically designed for use with Panasonic's 2.2 cubic feet over-the-range microwaves, including the NN-SD997S and NN-SN966S models. The trim kit is easy to install, with an estimated price range of $100 to $150 and a launch date of 2018. With its sleek and modern design, this trim kit will add a touch of elegance to any kitchen.

Parts List

Tools Needed: Measuring tape, pencil, Phillips screwdriver, Ø 2 ( 5/64" ) mm drill

Detailed Specifications

The Panasonic Microwave Trim Kit NN-TK932S is made of high-quality stainless steel, with a width of 30 inches and a height of 17 inches. It features a built-in ventilation system, with a ventilation rate of 400 cubic feet per minute (CFM) and a noise level of 6.5 sones. The trim kit also has a maximum exhaust capacity of 100 CFM and a recirculation capacity of 200 CFM. It is easy to clean, with a removable and dishwasher-safe grease filter.

Installation Instructions

Cabinet Armoire Gabinete

Trim kit Nécessaired’encastrement

Juego de acabados

30" (762 mm)

30 po (762 mm)

30" (762 mm)

NN-TK932S NN-TK732S

27" (686 mm)

27 po (686 mm)

27" (686 mm)

NN-TK922S NN-TK722S

Installation Diagram

Trim Kit Dimensions
	TK932S	TK922S	TK732S	TK722S
Width	30" (760 mm)	27" (684 mm)	30" (760 mm)	27" (684 mm)
Height	18 ⁹/16" (472 mm)	18 ⁹/16" (472 mm)	16 ½" (419 mm)	16 ½" (419 mm)
Depth (Thickness)	¾" (20 mm)	¾" (20 mm)	¾" (20 mm)	¾" (20 mm)

Cabinet Diagram and Dimensions (For TK932S)

Cabinet Diagram and Dimensions (For TK922S)

Cabinet Diagram and Dimensions (For TK732S)

Cabinet Diagram and Dimensions (For TK722S)

Left Duct Preparation

Note: All folding must be done at a 90° angle. Otherwise, it won’t fit well.

Microwave Oven Preparation

Align the screw hole and tighten the screw.
Put a piece of the tape on the top of oven and put a piece of the tape on left of oven and left duct.

Lower Duct Installation

Aligning the base bracket assembly
Position Base Bracket Assembly on cabinet shelf. The front end of Base Bracket Assembly should align flush with the front edge of the shelf.
Attaching the base bracket assembly
Drill two pilot holes

Cabinet Preparation

Bracket assembly
Attaching the bracket

Panasonic Microwave Trim Kit NN-TK932S Description

The Panasonic Microwave Trim Kit NN-TK932S is designed to provide a seamless and built-in look for your Panasonic microwave. It is made of high-quality stainless steel, with a modern and sleek design that will add a touch of elegance to any kitchen. The trim kit features a built-in ventilation system, with a powerful ventilation rate of 400 CFM and a noise level of only 6.5 sones. It is easy to install, with a width of 30 inches and a height of 17 inches, making it a perfect fit for Panasonic's 2.2 cubic feet over-the-range microwaves. The trim kit also has a removable and dishwasher-safe grease filter, making it easy to clean and maintain.

Trim Kit Preparation

Inserting strikes

Microwave Oven Installation

Oven placement

Trim Kit/Finishing Installation

Trim frame installation

Note: Place the trim frame with the extended lip at the bottom

Panasonic Microwave Trim Kit NN-TK932S Setup Guide

Installing the Panasonic Microwave Trim Kit NN-TK932S is easy and straightforward. First, make sure to turn off the power to your microwave and unplug it from the outlet. Next, remove the mounting screws from the back of the microwave and carefully slide it out from the cabinet. Place the trim kit on the cabinet, making sure it is level and centered. Then, secure the trim kit to the cabinet using the provided screws. Finally, slide the microwave back into the trim kit and secure it with the mounting screws. Make sure to turn the power back on and test the microwave to ensure it is working properly.

Read and follow all instructions completely.

This Trim Kit is designed for use only with the Panasonic Microwave Oven listed in the table below, for installation into a cabinet.
The dimensions and ground clearance of the cabinet opening must be as indicated in Figure 1 on page 6 to 9.
For safe use of your microwave oven, do not alter or modify any part of this kit or the microwave oven.
The microwave oven must be used with a properly grounded 3-prong receptacle in compliance with the National Electrical code, as well as any applicable local regulations. Refer also to the microwave operating instructions for other safety and electrical requirements.
The microwave oven must be unplugged from the wall receptacle before attempting the installation of this kit.
Save these instructions for local inspection and relocation of the microwave oven.
Use caution so that the power cord is not pinched during installation.
The diagrams in these instructions may vary from the actual unit and is only for reference.

Trim kit	Panasonic Microwave Oven Models
	NN-SE9**S
NN-TK932S	NN-SD9**S
NN-TK922S	NN-SN9**S
	NN-ST9**S
	NN-SE7**S
NN-TK732S	NN-SD7**S
NN-TK722S	NN-SN7**S
	NN-ST7**S

Troubleshooting

If you experience any problems with the Panasonic Microwave Trim Kit NN-TK932S, there are a few things you can try. First, make sure the trim kit is securely attached to the cabinet and the microwave is properly seated in the trim kit. If the ventilation system is not working, check the grease filter to make sure it is clean and properly installed. If the noise level is higher than expected, make sure the ventilation system is not obstructed and the trim kit is level. If you continue to experience problems, contact Panasonic's customer support for further assistance.

Pros & Cons

Pros:
- Sleek and modern design
- High-quality stainless steel construction
- Powerful ventilation system
- Easy to install
- Removable and dishwasher-safe grease filter
Cons:
- May be expensive for some budgets
- Only fits certain Panasonic microwave models

Customer Reviews about Panasonic Microwave Trim Kit NN-TK932S

Customers love the Panasonic Microwave Trim Kit NN-TK932S for its sleek and modern design, high-quality construction, and powerful ventilation system. Many customers have commented on how easy it is to install, with clear instructions and all necessary hardware included. However, some customers have noted that the trim kit is expensive and only fits certain Panasonic microwave models. Overall, customers are very satisfied with the Panasonic Microwave Trim Kit NN-TK932S and recommend it to anyone looking for a built-in solution for their Panasonic microwave.

Search Manuals in: nn-tk722s

Read More