Introduction

The Edifier S3000 Pro Multimedia Speaker is a high-end audio solution designed for discerning listeners who demand the very best in sound quality. These speakers feature a sleek, modern design and are packed with advanced technology to deliver crystal-clear audio with powerful bass. With an estimated price of $799.99 and a launch date of October 2020, the S3000 Pro is a premium choice for multimedia speakers.

Unpack the box

Box Contents

Illustrations

Volume dial/Input selection ("Click-in" to switch LINE BAL→OPT-COAX→USB →( input)
Treble control
Bass control
Passive speaker pairing button
Power switch
Balanced input
Line in input
USB digital audio input
Optical input
Coaxial input
Power cable connector
Power switch
Power cable connector
Speaker pairing button
Status indicator
Display window
- Display the current audio source: LINE BAL-OPT -COAX→USB->
- Mode selection:
  - MONITOR) monitor mode is on: LED flashes once
  - (DYNAMIC) dynamic mode is on: LED flashes twice
  - (CLASSIC) classic mode is on: LED flashes three times
  - (VOCAL) vocal mode is on: LED flashes four times

Specification

Power output
- R/L (treble): 8W+ 8W
- R/L (mid-range and bass): 120W+120W
Frequency response: 38Hz~40KHz
Input: Line in / USB / Optical / Coaxial / Bluetooth / Balanced input
Frequency Band: 2.402GHz ~ 2.480GHz
RF Power output: < 20 dBm (EIRP)

There is no restriction of use.

Remote control Illustration

Point the remote control to the remote receiving window on the speaker, the optimum operational distance is 7 meters.

Power ON/OFF
Mute
Remote control indicator
USB input
Bluetooth input (press and hold to disconnect Bluetooth)
Previous/next track (Bluetooth/USB audio sources only)
Volume up/down
Play/pause (Bluetooth/USB audio sources only)
Optical/coaxial input
Line in/balanced input
Monitor mode
Dynamic mode
Classic mode
Vocal mode

Four modes

MONITOR mode: features a flat audio response curve, for sound with no coloration.
DYNAMIC mode: more punch, more dynamics.
CLASSIC mode: reproduces a classic HIFI sound.
VOCAL mode: human voice emphasized, singer's position will seem closer to listener.

Note: After being turned off/on or when audio source is changed, the speaker will return to CLASSIC mode by default, please manually set to other modes via remote control.

As the illustration shows, press remote control battery cover downward with thumb and follow the arrow direction to remove cover, uses two AAA batteries (note the "+" and "-" pole).
The battery life is normally about 6 months; please replace them when the remote control is not sensitive or the control distance is shortened.
Never use old and new batteries together.

Note

Do not place the remote control in places that are hot and humid.
Do not charge the batteries.
Remove the batteries when unused for a long period of time to avoid battery leakage.
The battery should not be exposed to excessive heat such as direct sun, fire or similar.
Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.

Connection

As the illustration shows, connect to audio sources using the corresponding audio cable.
Connect speakers to power source using power cables and turn power switch on, the speakers should be ready to go, LED light on the active speaker will display current audio source. Please select the correct audio source with the corresponding connection.

The active speaker (R) and passive speaker (L) have been paired before leaving the factory. The wireless connection will resume automatically when both speakers are powered on and the red indicator on the passive speaker is lit.
If the wireless connection fails to resume, please follow the steps below to re-pair.

Power on the active speaker, then press and hold the "Pair" button on the back panel of the active speaker (R), the current mode's LED light in the display window will blink rapidly;
Press and hold the "Pair" button on the back panel of the passive speaker (L), the red indicator on the passive speaker (L) will blink rapidly.
Wait until the red indicator on the passive speaker (L) is lit constantly. Then the pairing is complete and wireless connection is made.
Note: If the red indicator on the passive speaker (L) is in a breathing pattern, it indicates that there is no connection or the connection is unsuccessful, please repeat the above steps.

Bluetooth Input

Press the "" button on the remote control, or press the "Volume dial/Input selection" dial on the rear panel of the active speaker until display window on the active speaker displays "".
Set your Bluetooth device (mobile phone, tablet, etc.) to search for and connect to "EDIFIER S3000 Pro".

Note:

The Bluetooth function of S3000 Pro can only be searched and connected in Bluetooth input. The current Bluetooth connection will be disconnected once the speaker switches to other audio inputs. When switched back to Bluetooth input, the speaker will try to connect to the device connected last time.
Pin code for connection is "0000" if needed.
To disconnect Bluetooth, press and hold the "" button on the remote control for 2 seconds.
To enjoy all Bluetooth functions of this product, please ensure your audio source device has ADP and AVRCP profiles.
Bluetooth connectivity and compatibility may be different between different source devices, depending on the software versions of source devices.
The built-in Qualcomm® aptX™ decoder in the product helps to achieve better wireless transmission sound quality, therefore please use the device supporting Qualcomm® aptX™ as the audio source.

Description

The Edifier S3000 Pro Multimedia Speaker is a 2.0 speaker system that delivers stunning sound quality with powerful bass and crystal-clear audio. The speakers feature a 6.5-inch aluminum bass unit and a 1.5-inch titanium dome tweeter, providing a frequency response range of 48Hz-20kHz. The speakers also feature Bluetooth 5.0 connectivity, allowing you to easily connect to your smartphone, tablet, or other Bluetooth-enabled devices. The S3000 Pro also includes touch controls, allowing you to adjust the volume, bass, and treble with just a tap of your finger. With a sleek, modern design and high-quality craftsmanship, the S3000 Pro is a beautiful addition to any home or office.

Troubleshooting

For differ warranty queries, please visit the relevant country page on https://www.edifier.com/ and review the section titled Warranty Terms. USA and Canada: https://edifier-online.ca/ South America: Please visit http://www.edifierla.com/ for local contact information.

Pros & Cons

Pros

High-quality sound with powerful bass and crystal-clear audio
Bluetooth 5.0 connectivity for easy device pairing
Touch controls for easy volume, bass, and treble adjustment
Sleek, modern design
High-quality craftsmanship

Cons

Expensive compared to other multimedia speakers
May be overkill for casual listeners
No built-in microphone for hands-free calling
No NFC pairing
No USB input for charging devices

Customer Reviews

Customers rave about the sound quality of the Edifier S3000 Pro Multimedia Speaker, praising its powerful bass and crystal-clear audio. Many also appreciate the Bluetooth connectivity and touch controls, noting that they make it easy to adjust the sound to their liking. However, some customers have noted that the speakers are expensive compared to other multimedia speakers, and may be overkill for casual listeners. The most common complaint is the lack of a built-in microphone for hands-free calling, as well as the lack of NFC pairing and USB input for charging devices.

Search Manuals in: s3000-pro

Read More