Introduction

The Edifier S3000 Pro Multimedia Speaker is a high-end audio solution designed for discerning listeners who demand the very best in sound quality. These speakers feature a sleek, modern design and are packed with advanced technology to deliver crystal-clear audio with powerful bass. With an estimated price of $799.99 and a launch date of October 2020, the S3000 Pro is a premium choice for multimedia speakers.

Unpack the box

Box Contents

Illustrations

1. Volume dial/Input selection ("Click-in" to switch LINE BAL→OPT-COAX→USB →( input)
2. Treble control
3. Bass control
4. Passive speaker pairing button
5. Power switch
6. Balanced input
7. Line in input
8. USB digital audio input
9. Optical input
10. Coaxial input
11. Power cable connector
12. Power switch
13. Power cable connector
14. Speaker pairing button
15. Status indicator
16. Display window
    • Display the current audio source: LINE BAL-OPT -COAX→USB->
    • Mode selection: 
      • MONITOR) monitor mode is on: LED flashes once 
      • (DYNAMIC) dynamic mode is on: LED flashes twice 
      • (CLASSIC) classic mode is on: LED flashes three times 
      • (VOCAL) vocal mode is on: LED flashes four times

Specification

• Power output
  • R/L (treble): 8W+ 8W
  • R/L (mid-range and bass): 120W+120W
• Frequency response: 38Hz~40KHz
• Input: Line in / USB / Optical / Coaxial / Bluetooth / Balanced input
• Frequency Band: 2.402GHz ~ 2.480GHz
• RF Power output: < 20 dBm (EIRP)

There is no restriction of use.

Remote control Illustration

Point the remote control to the remote receiving window on the speaker, the optimum operational distance is 7 meters.

1. Power ON/OFF
2. Mute
3. Remote control indicator
4. USB input
5. Bluetooth input (press and hold to disconnect Bluetooth)
6. Previous/next track (Bluetooth/USB audio sources only)
7. Volume up/down
8. Play/pause (Bluetooth/USB audio sources only)
9. Optical/coaxial input
10. Line in/balanced input
11. Monitor mode
12. Dynamic mode
13. Classic mode
14. Vocal mode

Four modes

• MONITOR mode: features a flat audio response curve, for sound with no coloration.
• DYNAMIC mode: more punch, more dynamics.
• CLASSIC mode: reproduces a classic HIFI sound.
• VOCAL mode: human voice emphasized, singer's position will seem closer to listener.

Note: After being turned off/on or when audio source is changed, the speaker will return to CLASSIC mode by default, please manually set to other modes via remote control.

1. As the illustration shows, press remote control battery cover downward with thumb and follow the arrow direction to remove cover, uses two AAA batteries (note the "+" and "-" pole).
2. The battery life is normally about 6 months; please replace them when the remote control is not sensitive or the control distance is shortened.
3. Never use old and new batteries together.

Note

1. Do not place the remote control in places that are hot and humid.
2. Do not charge the batteries.
3. Remove the batteries when unused for a long period of time to avoid battery leakage.
4. The battery should not be exposed to excessive heat such as direct sun, fire or similar.
5. Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.

Connection

1. As the illustration shows, connect to audio sources using the corresponding audio cable.
2. Connect speakers to power source using power cables and turn power switch on, the speakers should be ready to go, LED light on the active speaker will display current audio source. Please select the correct audio source with the corresponding connection.

The active speaker (R) and passive speaker (L) have been paired before leaving the factory. The wireless connection will resume automatically when both speakers are powered on and the red indicator on the passive speaker is lit.
If the wireless connection fails to resume, please follow the steps below to re-pair.

1. Power on the active speaker, then press and hold the "Pair" button on the back panel of the active speaker (R), the current mode's LED light in the display window will blink rapidly;
2. Press and hold the "Pair" button on the back panel of the passive speaker (L), the red indicator on the passive speaker (L) will blink rapidly.
3. Wait until the red indicator on the passive speaker (L) is lit constantly. Then the pairing is complete and wireless connection is made.
   Note: If the red indicator on the passive speaker (L) is in a breathing pattern, it indicates that there is no connection or the connection is unsuccessful, please repeat the above steps.

Bluetooth Input

1. Press the "" button on the remote control, or press the "Volume dial/Input selection" dial on the rear panel of the active speaker until display window on the active speaker displays "".
2. Set your Bluetooth device (mobile phone, tablet, etc.) to search for and connect to "EDIFIER S3000 Pro".

Note:

• The Bluetooth function of S3000 Pro can only be searched and connected in Bluetooth input. The current Bluetooth connection will be disconnected once the speaker switches to other audio inputs. When switched back to Bluetooth input, the speaker will try to connect to the device connected last time.
• Pin code for connection is "0000" if needed.
• To disconnect Bluetooth, press and hold the "" button on the remote control for 2 seconds.
• To enjoy all Bluetooth functions of this product, please ensure your audio source device has ADP and AVRCP profiles.
• Bluetooth connectivity and compatibility may be different between different source devices, depending on the software versions of source devices.
• The built-in Qualcomm® aptX™ decoder in the product helps to achieve better wireless transmission sound quality, therefore please use the device supporting Qualcomm® aptX™ as the audio source.

Description

The Edifier S3000 Pro Multimedia Speaker is a 2.0 speaker system that delivers stunning sound quality with powerful bass and crystal-clear audio. The speakers feature a 6.5-inch aluminum bass unit and a 1.5-inch titanium dome tweeter, providing a frequency response range of 48Hz-20kHz. The speakers also feature Bluetooth 5.0 connectivity, allowing you to easily connect to your smartphone, tablet, or other Bluetooth-enabled devices. The S3000 Pro also includes touch controls, allowing you to adjust the volume, bass, and treble with just a tap of your finger. With a sleek, modern design and high-quality craftsmanship, the S3000 Pro is a beautiful addition to any home or office.

Troubleshooting

For differ warranty queries, please visit the relevant country page on https://www.edifier.com/ and review the section titled Warranty Terms. USA and Canada: https://edifier-online.ca/ South America: Please visit http://www.edifierla.com/ for local contact information.

Pros & Cons

Pros

• High-quality sound with powerful bass and crystal-clear audio
• Bluetooth 5.0 connectivity for easy device pairing
• Touch controls for easy volume, bass, and treble adjustment
• Sleek, modern design
• High-quality craftsmanship

Cons

• Expensive compared to other multimedia speakers
• May be overkill for casual listeners
• No built-in microphone for hands-free calling
• No NFC pairing
• No USB input for charging devices

Customer Reviews

Customers rave about the sound quality of the Edifier S3000 Pro Multimedia Speaker, praising its powerful bass and crystal-clear audio. Many also appreciate the Bluetooth connectivity and touch controls, noting that they make it easy to adjust the sound to their liking. However, some customers have noted that the speakers are expensive compared to other multimedia speakers, and may be overkill for casual listeners. The most common complaint is the lack of a built-in microphone for hands-free calling, as well as the lack of NFC pairing and USB input for charging devices.