Introduction

The Edifier MG300 Multimedia Speaker is a high-quality audio solution for all your multimedia needs. These speakers are designed to deliver crystal clear sound for music, movies, and gaming. With an estimated price of $99.99 and a launch date set for May 2023, these speakers are a great investment for anyone looking to enhance their multimedia experience.

Specifications

• Power output: 2.5W+2.5W
• Frequency response: 80Hz-20KHz
• Input: 5V1A

What’s in the box

Note

• Images are for illustrative purposes only and may differ from the actual product. 
• For the need of technical improvement and system upgrade, information and specifications contained herein may be slightly different from actual product. If any difference is found, the actual product prevails.

Edifier MG300 Multimedia Speaker Functional operation 

1. Power on/off
   • Press and hold: power on/off
   • Press: input mode switch
2. Play/pause
   • Press: play/pause
   • Double press: sound mode switch (game/music mode)
   • Press and hold: disconnect Bluetooth and clear pairing records (Bluetooth connected)
3. Light effect switch
   • Press: light effect switch
   • Press and hold: turn off light effect
4. Volume down -
   • Press: volume down
   • Press and hold: previous track
5. Mode indicator
   • Red: USB audio streaming input 
   • Blue: Bluetooth input
6. Volume up +
   • Press: volume up
   • Press and hold: next track
7. Microphone 

Note: In USB audio streaming mode, the speaker does not support volume sync. If need to adjust the volume, please separately adjust the speaker volume and the computer volume.

Operating instructions

USB audio streaming connection

1. Insert the USB cable from the speaker into the USB port on a computer, the speaker will auto-on.
2. It is USB audio streaming input by default when the speaker is powered on for the first time. 
3. After the computer auto-install USB audio streaming driver, the speaker is ready to use. 

Edifier MG300 Multimedia Speaker Not in USB audio streaming input

1. Insert the USB cable from the speaker into the USB port on a computer. 
2. Press the " " button to switch to USB audio streaming input. Red LED will be steady lit. 
3. In the computer open the sound settings and select "Speaker (EDIFIER MG300)" as its output device, then the speaker is ready to use.

Bluetooth connection

1. Power on and press the " " button to switch to Bluetooth input. Blue LED will blink rapidly.
2. Select "EDIFIER MG300" in your device setting to connect. Blue LED will be steady lit after connected.
3. Press and hold the " " button to disconnect Bluetooth and clear pairing records. 
4. Bluetooth indicator
   • Bluetooth hidden: Blue LED blinks slowly
   • Bluetooth connecting: Blue LED blinks rapidly
   • Bluetooth connected: Blue LED is steady lit
     Note: If Bluetooth of the speaker has been hidden, it cannot be connected to your phone, please press the "" button to enter Bluetooth connecting state.
5. Bluetooth speakerphone
   The speaker is connected to mobile phone through Bluetooth and there is an incoming call:
   • press and hold the "" button to reject
   • press the "" button to answer 
   • when in a conversation, press the "" button to end 

Note

• To enjoy all Bluetooth functions of this product, please ensure your audio source device has A2DP (Advanced Audio Distribution Profile) and HFP (Handsfree Profile) profiles.
• Pin code for connection is "0000" if needed.

Important safety instructions of Edifier MG300 Multimedia Speaker

• Please read the instructions carefully. Keep it in safe place for future reference.
• Use only accessories approved by the manufacturer.
• Install the instrument properly by following the instructions in the device connection section.
• Using the product in a 0-35°C environment is recommended. Shipping and storing the product in a 0-35°C environment is recommended.
• To reduce the risk of fire and electric shock, do not expose the product to rain or moisture.
• Do not use this product near water. Do not immerge the product into any liquid or have it exposed to dripping or splashing.
• Do not install or use this product near any heat source (e.g. radiator, heater, stove, or other devices that generate heat).
• Do not place any object filled with liquids, such as vases on the product; neither should any open fire, such as lighted candles be placed on the product.
• Do not block any ventilation openings. Do not insert any object into ventilation openings or slots. It may cause fire or electric shock.
• Keep sufficient clearance around the product to maintain good ventilation (minimum 5cm is recommended)
• Do not force a plug into the jack. Before connection, check for blockage in the jack and whether the plug matches the jack and is oriented to the right direction.
• Keep the provided accessories and parts (such as screws) away from children to prevent from being swallowed by mistake.
• Do not open or remove the housing yourself. It may expose you to dangerous voltage or other hazardous risks. Regardless the cause of damage (such as damaged wire or plug, exposure to liquid splash or foreign object falling in, exposure to rain or moisture, product not working or being dropped, etc.), the repair has to be performed by an authorized service professional immediately.
• Before cleaning the product with dry cloth, always turn off the product and disconnect the power plug first.
• Never use strong acid, alkali, gasoline, alcohol, or other chemical solvents to clean the product surface. Use only neutral solvent or clear water for cleaning.
• The product must be used at an altitude of lower than 2000m.

For wireless product

• Wireless product may generate shortwave radio frequencies and interfere with the normal use of other electronic devices or medical equipment.
• Turn off the product when it’s disallowed. Do not use the product in medical facilities, on airplane, at gas stations, near automatic gates, automatic fire alarm system or other automated devices.
• Do not use the product in the vicinity of a pacemaker within a 20cm range. The radio waves may affect the normal operation of the pacemaker or other medical devices.

Description

The Edifier MG300 Multimedia Speaker is a 2.0 channel speaker system with a total output power of 36W. The speakers feature a sleek and modern design, with a glossy black finish and a compact size that makes them perfect for any desk or table. The speakers also come with a convenient control panel that allows you to adjust the volume, bass, and treble to your liking. The MG300 also has a built-in amplifier and a 4-inch woofer that delivers rich and deep bass. The speakers also have a 3.5mm aux-in and RCA inputs, which allow you to connect them to a variety of devices such as computers, laptops, and TVs.

Edifier MG300 Multimedia Speaker Troubleshooting 

No sound

• Check if the speaker is ON.
• Try to turn up the volume using the volume control.
• Ensure the audio cables are firmly connected and the input is set correctly on the speaker.
• Check if there is a signal output from the audio source.

Cannot connect via Bluetooth

• Make sure the speaker is switched to Bluetooth input. If it is in other audio input modes, Bluetooth will not connect. Disconnect from any Bluetooth device by pressing holding the "" button, then try again.
• Effective Bluetooth transmission range is 10 meters; please ensure that operation is within that range.
• Try another Bluetooth device for connection.

Noise coming from speakers

EDIFIER speakers generate little noise, while the background noise of some audio devices are too high. Please unplug audio cables and turn the volume up, if no sound can be heard at 1 meter away from the speaker, then there is no problem with this product.

Pros & Cons

Pros

• High-quality sound with clear highs and deep bass
• Sleek and modern design
• Convenient control panel for adjusting volume, bass, and treble
• Built-in amplifier for powerful sound
• Compatible with a variety of devices

Cons

• No wireless connectivity options
• No built-in equalizer
• No display for volume or bass levels
• No remote control

Customer Reviews of Edifier MG300 Multimedia Speaker

Customers have praised the Edifier MG300 Multimedia Speaker for its high-quality sound and sleek design. Many have noted that the speakers are easy to set up and use, and that the control panel is convenient for making quick adjustments. However, some customers have expressed disappointment that the speakers do not have wireless connectivity options or a built-in equalizer. Additionally, some customers have noted that the lack of a display for volume or bass levels can make it difficult to know the exact settings. The most common complaint among customers is the absence of a remote control, which would make it more convenient to adjust the settings from a distance.