Introduction

Introducing the Soundbot SB221 Wireless Headset, the perfect companion for all your audio needs. Whether you're commuting, working out, or just need some peace and quiet, these headphones deliver high-quality sound and a comfortable fit. The estimated price for the Soundbot SB221 Wireless Headset is $60, making it an affordable option for those looking for a reliable wireless headset. The launching date for this product is yet to be announced.

Detailed Specifications

The Soundbot SB221 Wireless Headset offers the following key features:

MODEL: SB221
Bluetooth version: 5.0
Frequency response: 20Hz-20kHz
Impedance: 32 Ohm
Sensitivity: 110dB +/- 3dB
Driver diameter: 40mm
Standby time: up to 200 hours
Playtime: up to 24 hours
Charging time: about 2 hours
Weight: 180g
Bluetooth 4.0w/10 Meter Wireless Range
- A2DP 1.2 Profile
- AVRCP 1.4 Profile
- HSP 1.2 Profile
- HFP 1.6 Profile
Standby/Talk Time; Up to 300hrs/25hrs
Playback Time: Up to 20hrs (dependant upon wireless distance & volume from device)
Input Power: 5V, 450mAh
Battery: Rechargeable Li-Polymer
Environment: Operating Temp.: -10C - +55C °
Storage Temp.: -20C ~ 80C°

PRODUCT FEATURE

Multi-Function Button (MFB)

soundbot_sb221_wireless_headset.features.png

Answer/End a call: Single click
Reject a call: Press & hold for 2 seconds
Redial: Press twice
Play/Pause Music: Press once

CHARGE HEADSET FOR AT LEAST 2 HOURS

Red LED will light up when charging.
Red LED will turn off once it's fully charged.
Be sure headset is powered off before going to next step.

PAIRING YOUR SB221 VIA BLUETOOTH

In the power-off mode, press and hold the multifunction for 7-9 seconds until the LED alternately flashes between red and blue.
Pair with your device via search/add new Bluetooth on the media device.
The SB221 will beep as confirmation that the headset has paired with the media device.
If a PIN code prompts, enter 0000.

CONFIRM SUCCESSFUL PAIRING

Your device will show that Soundbot SB221 Wireless Headset is “paired.”

Unsuccessful pairing

LED may still be flashing red and blue, search on your device again for new device.
If the paring is still unsuccessful, power down by pressing and holding down multifunction button for 4 seconds and then re-start from previous step “Pairing your SB221 via Bluetooth,” or contact SoundBot at support@volcus.comfor additional supports.
SB221 will automatically exit pairing mode within 5 minutes of idle time or inactivity and shut down in another 5 minutes.

OTHER CONTROLS

Mute/Unmute the microphone during a call: Press & hold - button for 3 seconds.
Transfer calls between SB221 and the mobile phone: Press & hold + button for 2 seconds.

VOICE COMMAND (On Supported phone only)

Voice dialing for supported Siri or Android devices: Press both + & - button simultaneously, followed by an alert tone to indicate activation of the voice dialing function. Say the desired command or name from the phone contact list to dial.

Description

The Soundbot SB221 Wireless Headset offers a sleek and modern design with comfortable ear cups and a padded headband. The ear cups can be rotated and folded for easy storage. The headphones are equipped with Bluetooth 5.0 technology, providing a stable and fast connection. The sound quality is impressive, with deep bass, clear mids, and crisp highs. The microphone offers clear and noise-free communication, making it ideal for online meetings and gaming. The headphones are also equipped with easy-to-use controls for play, pause, skip, and volume.

GENERAL USE AND NOTICES

Please read the following information before using this product. Users are not permitted to make changes or modify the product and the accessories in any way.

Do not use the product while operating a motor vehicle.
To avoid electronic interference and/or compatible conflicts, TURN OFF the product in any facilities where posted notices instruct you to do so.
For example: Aircraft, Military Base, Hospital or Health Care Facilities.
To avoid impairing your hearing in the long-term operation, keep the headset volume at the moderate level.
Keep away of fire, water, and high voltage equipments.
Follow the charging procedure described in this guide to charge the product.

CHARGING THE BATTERY

SB221 uses a rechargeable battery. A normal charging process takes about 2-3 hours. The red LED will turn off when charging is completed.
When the battery is nearly used up, the red LED will flash twice every 15 seconds and there will also be a sound alert from the headset. Please re-charge the headset.
Please make sure the battery has been fully charged your first 3 uses to ensure the battery's best performance.
Always use correct AC Power Adapter to charge the cause damage and void the warranty Upon completic Jpon completion of charging, please unplug the charging cable from SB221.
Do not put and leave the headset in charging mode after it's fully charged. This will shorten the lifetime of the battery.
Do not use the headset in extreme weather condition. It is recommended to keep the environment temperature between 15 and 25 degree. ..
Do not install, place or use the headset near any source of heat such as a stove, radiator, oven, toaster, coffee maker or other apparatus includina microwave oven) that gives off heat.

SAFETY INSTRUCTIONS

Keep the unit away from extreme weather to protect the unit against electric shock, explosion and/or body injury.
Do not use the unit if it has been dropped or damaged in any way. Do not expose batteries or battery pack to excessive heat, such as direct sunlight or open flame.
Keep the product out of reach of children. Do not use the headset at excessive levels as it may damage hearing-
Do not puncture or disassemble the exterior surface of the product in any way.
Keep the unit tree from dust, lint, etc. Do not use this unit for anything other than its intended use or purpose. Doing so may damage the device.

Troubleshooting

Here are some common problems and solutions for the Soundbot SB221 Wireless Headset:

Problem: The headphones won't turn on.
Solution: Make sure the headphones are charged. If they still won't turn on, try resetting them by holding down the power button for 10 seconds.
Problem: The sound quality is poor.
Solution: Make sure the headphones are connected to a stable Bluetooth connection. Try moving closer to the device or resetting the headphones.
Problem: The microphone is not working.
Solution: Make sure the microphone is turned on and the volume is up. Try resetting the headphones or connecting to a different device.

Pros & Cons Soundbot SB221 Wireless Headset

Pros

Affordable price
Impressive sound quality
Comfortable fit
Stable Bluetooth connection
Clear microphone

Cons

No active noise cancellation
Limited battery life compared to other headphones in its price range

Customer Reviews

Customers love the Soundbot SB221 Wireless Headset for its impressive sound quality, comfortable fit, and affordable price. However, some customers have complained about the limited battery life. Overall, the headphones have received positive reviews, with an average rating of 4.2 out of 5 stars.

Search Manuals in: sb221

Read More