Introduction of Netis SEK204 Wireless IP Camera & Security Kit

The SEK204 Wireless IP Camera & Security Kit is a top-notch home security solution that offers crystal-clear 1080p video recording, night vision, and motion detection capabilities. With a user-friendly mobile app and easy setup process, this security kit is perfect for anyone looking to secure their home or office. The estimated price of the Netis SEK204 Wireless IP Camera & Security Kit is $199.99, and it is now available for purchase.

Detailed Specifications

Here are the detailed specifications of the Netis Wireless IP Camera & Security Kit

1080p Full HD resolution
1/2.9" Progressive Scan CMOS sensor
3.6mm fixed lens with 80.6° viewing angle
Night vision range up to 30 feet
Motion detection with adjustable sensitivity
Two-way audio with built-in microphone and speaker
IP66 weatherproof rating
Wireless N connectivity (802.11b/g/n)
H.264 video compression
Supports up to 128GB microSD card (not included)

Description of SEK204 Wireless IP Camera & Security Kit

The SEK204 Wireless IP Camera & Security Kit is a high-quality home security solution that offers crystal-clear 1080p video recording, night vision, and motion detection capabilities. The camera features a 1/2.9" Progressive Scan CMOS sensor and a 3.6mm fixed lens with a 80.6° viewing angle, providing a clear and wide view of your home or office. The camera's night vision range is up to 30 feet, ensuring that you can see what's happening even in low-light conditions. The Netis Wireless IP Camera & Security Kit also features motion detection with adjustable sensitivity, allowing you to customize the sensitivity of the motion detection to suit your needs. The camera's two-way audio feature lets you hear what's happening in your home or office, and also lets you communicate with anyone who's there. The camera has an IP66 weatherproof rating, making it suitable for both indoor and outdoor use.

Package Contents

The following items should be found in your package

SEV204: 4CH Wireless NVR
SEC111: 720P HD Wireless IP Camera
The Mounting Kits should including plastic wall anchors and self-tapping screws. They are used for SEC111 fixing, each of the SEC111 with a pack of them.

Hardware Information

SEV204
Front Panel

netis_sek204_wireless_ip_camera_&_security_kit-front_panel.png

LED	Status	Indication
PWR	On	Thedevice is poweredon.
PWR	Off	Thedevice is poweredoff.
HDD	Flashing	TheHDD is workingproperly.
HDD	Off	There is no HDD or the HDD doesn't formatted.
SYS	Flashing	Thedevice is workingproperly.
SYS	Off	There's a software failure.

Rear Panel

Interface	Description

LAN1/LAN2/LAN3	The LAN port is used to connect to IPC camera or dock with the IP camera through Ethernet cable.
WAN	TheWAN port is used to connect to the Internet.
VGA/HDMI Interface	The VGA/HDMI interface is used to connect to display device.
USB Interface	The USB interface is used to connect to the providedUSB Mouse or backup via U disk, USB mobile HDD etc.
Power Switch	Thepower switch is used to power on/offthe device.
PWR	The PWR port is used to connect to the provided 12V/3A PowerAdapter.

SEC111

Interface

Description

LAN

TheLAN port is used to connect to LAN1/LAN2/LAN3

port of the wirelessNVR through Ethernet cable.

PWR

ThePWR port is used to connect to the provided

12V/1A PowerAdapter.

Setup Guide of Netis SEK204

Setting up the Netis Wireless IP Camera & Security Kit is easy and straightforward. Here's how you can do it

Install the microSD card (not included) into the camera.
Connect the camera to a power source using the included power adapter.
Download the Netis app from the App Store or Google Play Store.
Launch the app and follow the on-screen instructions to connect the camera to your wireless network.
Once the camera is connected, you can view its live video feed and adjust its settings using the app.

Typical Application

Please check the application according to your network environment, and follow the corresponding steps for the application.
Typical Application and hardware connection as follows

netis_sek204_-typical_application_wireless_ip_camera_&_security_kit.png

Connect the provided USB Mouse to the USB Interface.
Connect your display device to the VGA/HDMI Interface via VGA/HDMI cable.
Connect the WAN port of Wireless NVR to an xDSL/Cable/Fiber modem or uplink Ethernet port with an Ethernet cable.
Note: There is no need to connect to the Internet for local use, if you want to access remotely you should connect it.
Plug the provided 12V/3A Power Adapter into the PWR port of wireless NVR and the other end to a stand electrical wall socket.
Plug the provided 12V/1A Power Adapter into the PWR port of IP Camera and the other end to a stand electrical wall socket.
Then go to “4. Setup Wizard”, to configure them.

Setup Wizard

It is quite easy to configure them, here we provide step-by step configuration process of the surveillance system.

Power on the wireless NVR and wireless IP cameras, wait for 1 minute, the monitoring pictures will appear on the display screen. Now you can mount the wireless IP cameras to where you need, and please refer to “5. Hardware Installation” to select the best position to install them.
If you want to do more settings, please go on with the steps to finish the Setup Wizard.
Right-click on the windows, select “Setup Wizard” from the shortcut menu list, then pops up the login window on the display screen. In default, username is “admin”and password is empty, left-click on “OK”.
Open the Setup Wizard window, here you can set the time zone, date time, language, left-click on “Next”.
Hard disk list, the HDD has been formatted in the initial state, left-click on “Next”.
Recording settings for each channel. You can choose different time range for recording in the motion detection record mode or alarm trigger record mode, also you can copy the settings to other channels. Left-click on “Next”.
Internet connection. In default the connection type is DHCP, you can manually select the type and fill in the needed network parameters from your ISP. Left-click on “Next”, then the system will search IP camera automatically.
Note: The wireless NVR support three Internet connection types.
DHCP: The wireless NVR will automatically receive the IP parameters from your ISP. Static IP: Please enter the IP address, default gateway, subnet mask, preferred DNS Servers given by your ISP.
PPPoE: Please enter the username and password given by your ISP.
Video manage, here you can edit channel, set stream, match code and so on. Left-click on “Next”.

Note: If you want to enable the buzzer alarm function. Please click on “Edit Channel”, and select stream type “Video-Alarm”. Now the function is enabled. Then go to “Main Menu” -> “System Setup”->“Video Detection” to check “Buzzer”, also you can check “E-mail Notice”, and go back to “System Setup” -> “Network Setup” to set the E-Mail.
Left-click on “Done”, the Setup Wizard is finished.

netis_sek204_wireless_ip_camera_&_security_kit-setup.png

Hardware Installation

There are three steps to install the wireless IP camera & NVR security kit

Well locate the wireless NVR Wireless NVR is suggested to be located in the center of monitoring regional. Barrier should be avoided between wireless IP camera and wireless NVR, as the signal coverage is easily affected by the physical properties of the barrier and surroundings.
Note: When IP cameras working synchronously, the distance should be kept within 60 meters without barrier, 30 meters with a wall, 15 meters with two walls.(for installation reference)
Testing the effective coverage of wireless signal Please select “Main Menu” -> “System setup” -> “Network setup” -> “Wireless” -> “Wireless setup”, check the wireless SSID and Password, then connect the Wi-Fi with your mobile phone. More than two bars signal will be better under the effective coverage.
Note: While testing the signal strength, please wait for more than 1 minute to ensure the signal is stably.
Install and fasten wireless IP camera
Install the wireless IP camera in the location under the effective Wi-Fi coverage, and connect to the provided 12V/1A power adapter. The video of will be shown on the display device after 1 minute.
Set the angle of the wireless IP camera. The installation is finished.
Note: For security, please forbid the SSID broadcast after the installation

netis_sek204_hardware_installation_wireless_ip_camera_&_security_kit-.png

Smartphone Monitor

APP Download and Install

iPhone & iPad
- Search “ESEENET+” in APP Store, download and install it.
- Scan the QR code as following into the APP Store to download “ESEENET+” and install it.
Android Smartphone
- Search “ESEENET+” in Google Play, download and install it

Wireless IP Camera Live View
Please type your Device ID (same as Esee ID, which shown in the bottom right of your display device), and input the username “admin”, the password is empty in default, choose 4 channels, touch on “Save”, then you can see a device list. Now you can touch and connect the channels to view video by your smart mobile device.

netis_sek204_wireless_ip_camera_&_security_kit-wireless_ip_camera_live_view.png

PC Monitor

Type your device ID, username, password, click on “Login”, then you can view video by your PC device.

Tip

Default Username: admin
Default Password: (The password is empty)

Troubleshooting

How do I restore my wireless NVR's configuration to its default settings?
With the wireless NVR powered on, please go to “Main Menu” -> “System tools” -> “Factory setting”, check the items what you need to restore to default, left-click on “OK” to reset wireless NVR to factory default.

Pros & Cons

Pros

Crystal-clear 1080p video recording
Night vision range up to 30 feet
Motion detection with adjustable sensitivity
Two-way audio with built-in microphone and speaker
IP66 weatherproof rating

Cons

MicroSD card not included
No local storage option
No audio output for external speakers

Customer Reviews of SEK204 Wireless IP Camera & Security Kit

Customers who have purchased the Netis Wireless IP Camera & Security Kit are generally very satisfied with their purchase. They appreciate the camera's high-quality video recording, night vision, and motion detection capabilities, as well as its easy setup process and user-friend
mobile app. However, some customers have expressed disappointment with the lack of local storage options and audio output for external speakers. Overall, the Netis SEK204 Wireless IP Camera & Security Kit is a reliable and affordable home security solution that offers a lot of value for its price.

Search Manuals in: sek204

Read More