Vevor XRJ3LX3 Slush Frozen Drink Machine

Introducing the Slushies and other frozen beverages can be made with the help of the Vevor XRJ3LX3 Slush Frozen Drink Machine, which is a commercial-grade appliance created specifically for this purpose. The fact that it has three tanks that are each 15 liters in capacity makes it possible to produce multiple flavors at the same time. Because of its sturdy structure, user-friendly controls, and effective chilling system, it is an excellent choice for usage in establishments such as restaurants, bars, and other establishments that require the manufacture of frozen drinks in large quantities.

Detailed Specifications

The Vevor Slush Frozen Drink Machine boasts several impressive features that make it stand out from its competitors. It has a capacity of 3L, allowing you to make multiple servings of your favorite frozen drinks at once. The machine is also equipped with a high-powered motor that can crush ice in seconds, ensuring that your drinks are always smooth and refreshing. Additionally, the machine has an adjustable stainless steel blade that allows you to control the consistency of your drinks, whether you like them fine or chunky.

Usage

This machine is specially used for makings lush. If used to make plate dairy and other foods, bowl material temperature needs to be tested and abide by the machine’ current regulation and 1.20perator standard

Main Component

Bowl roof
Bowl
Control panel
Water tray
Water tray cover
6 Drain hose
Tap
Handle
Machine foot

Fig1

In this manual the items mean as below

XRJ3LX1, one-bowl slush machine
XRJ3LX2, two-bowl slush machine
XRJ3LX3, three-bowl slush machine

Technical data

Remarks: Capacity and weight are approximate number

Mode	XRJ3LX1	WRJLX2	XRJLX3
LiDwt-(cm)	20X50X52	35XS0X52	52X50X52
Gross weight (kg) (Bowl empty)	18	29	40
	See nameplate
Power (w) input (w)	See nameplate
Temperature	Win, 20C/68 – Max, 32°C/89.6°F
Bowl	1	2	3
Bowl (1)	3	6	9
Noise	<<70db
Climate Type	N

Manufactory has right to change and will not notice specially

Fig2

Any change or increase has to be approved and executed by Manufactory..

Control panel

Fig 3

Switch on/off
Bowl Button
Display screen
Slush hardness
Slush softness
Light
Shift
Slush system/cleaning system/Standby system )

Safety manual

Slush machine parts and condenser’ s installation, slush machine troubleshooting. exclusion and maintenance have to be operated by manufacturer professionals or people who have related experience. Without experienced people monitoring or guiding, slush machine can not be used by disabled, sense disable, mental disable people’s, lack of experience and knowledge
Children need to be taken care when playing nearby the machine.
When machine’s vire broken, they have to be replaced by manufacturer professionals or people who have related experience.
When machine scraped, it has to be delivered and handled by related authority institution

Transportation and storage

Packing

Carton box, contoured foam & collect. Packing size (approximate)

	Width (L)	Depth (D)	[ Hight (H)	Weight
XRJ3LX1	270mm	570mm	570mm	27kg
XR3XE2	430mm	570mm	570mm	39kg
XRIBLX3	590mm	570mm	570mm	52kg

Remarks: packing size and weight are approximate.

Transportation
keep upward and carried by two people at least.

Storage
Notice please do not exceed three layers.

Fig 5

Vevor XRJ3LX3 Slush Frozen Drink Machine Installation

The slush machine has to be installed indoor with hard and plain ground under enough light and ventilation (Ground inclination can’t be more than 2 degree)

Parts list

After cleaning and disinfecting allindicated parts in manual have to be coated with lubricating oil.

Position to install

Installation position have to planed in advance;
Installation place have to be hard and plain
Installation condition is enough ight and ventilation and clean;
Power sacket is also needed;
Installation distance from other objects see below fig6

Handling package material

Handling packing material separately under local rules and we suggest keep itto repack and ship in future.

Connect power

Ensure slush machine s off before connecting power.
Then plugin to connect power.
Data can be referred from machine back nameplate.
Warning: Socket has to be placed within user touching distance in order to unplug quickly when emergency without using other tools,

Description

The Vevor Slush Frozen Drink Machine is not only functional but also stylish. Its compact design makes it easy to store in your kitchen or bar area, while its modern and sleek appearance adds a touch of elegance to any space. The machine is made of high-quality materials, ensuring that it's durable and long-lasting. It's also easy to clean and maintain, making it a convenient addition to your home appliance collection.

Operation

Preparing material and stirring evenly

Only water is prohibited

Fig7

Attention
Operate under manufactory direction; Dilute 2nd sir concentrated liquor with water in 2 container Mixture sugar content should be within 10%-15% lower content will damage the augers and gear motors

Remove the lid as below steps

Lift the top lid;
Pour the material into bowls
Warning: Hot liquid can not be put infhot liquid means degree exceed 25°C) Material level can not exceed maximum height level
Close the top lid after pouring the material

Warning :Before connecting power or starting machine, putmaterial into bowl Material can not just be water.

Warning Banning putting hand in bow| when machine is working,

Starting a 1-BOWL SLUSH MACHINE

The following controls are on the panel:

A Main switch It is used to switch on/off the power supply to the whole machine.
B. Light Switch It is used to switch on/off the light is used to shift 3 different modes. display shows SLS that is used to
C SET switch It Press Slush Mode.
- Press display shows CLR that is used to switch on Cleaning Mode.
- Press once more, display shows OFF that is used to switch off Mixing.
D. Slush hardness and Slush softness They are used to adjust slush thickness, in slush model, display shows SLS, then press to increase or reduce the slush thickness

Starting a 2-BOWL SLUSH MACHINE

The following controls are on the panel:

A Main switch It is used to switch on/off the power supply to the whole machine.
B. Light Switch . It is used to switch on/off the light
C switch It is used to shift 3 different modes Firstly Press corresponding bowl1 [ webworm, then press display shows SLS that is used to switch on Slush Mode. Press again, display shows CLR that is used to switch on Cleaning Mode. Press once more, display shows OFF that is used to switch off Mixing
D. Slush hardness and Slush softness Switch: They are used to adjust slush thickness, in slush model, press corresponding Bowl1 or Bowl2 then press up or down to increase or reduce the slush thickness

Starting a 3-BOWL SLUSH MACHINE
“The following controls are on the panel:

A Main switch Itis used to switch on/off the power supply to the whole machine.
B. Light Switch . It is used to switch on/off the light
C. SET switch :it is used to shift 3 different modes. Firstly press corresponding bowl1 Bow bowl2 Bowl or bowl3 Bowl then press display shows SLS that is used to switch on Slush Mode. Press again, display shows CLR that is used to switch on Cleaning Mode. Press once more, display shows OFF that is used to switch off Mixing.
D. Slush hardness and Slush softness Switch They are used to adjust slush thickness, in slush model, press corresponding bowl1 Bowl2 Bowl bow3 ,then press , bowl2 Bowl or up or down to increase or reduce the slush thickness.

Dispensing slush
Pull down the handle and slush will outflow from the bowl

Attention; if distribute slush first time or after long A stop please extrude and waste 2 title and then distribute customers.

Attention: Material temperature in bowl needs to be tested with Standard thermometer timely to ensure: material temperature is lower than storing temperature. Power can not be cut off when machine is working or there are materal.

Emergency
Warning: When emergency, machine needs to be tumed off by power button and cut off power

If frozen, cut off power and ask for specialized people to handie. If fire, clear nearby area and ask for professionals.

Cleaning and maintenance

Before cleaning or maintaining external parts, please ensure main switch s off and unplug

Any cleaning or maintaining protection supplies needs to wear (gloves. glasses an so.an) based on local safety standard

When cleaning or maintaining. operate as below.
Wear protective gloves against an accident
Do not use solvent or flammable substance
Do not use tough or metal sponge to clean machine or parts
Do not spray liquid to nearby area.
Do not wash parts in the bow.
Do ot dry parts in furnace or microwave oven
Do notimmerse the machine in water
Do ot spray the water to the machine directly
Warm water and approximate cleaner can be used (abiding by local law and rules) –
After finishing, make sure that all protective covers and guards that have been removed or opened and sent back in place and property secured,

Cleanliness and hygiene have to be taken carefully and forcibly based on local standard to ensure qualified slush

ATTENTION: Bowl needs to be cleaned everyday at least and abiding by local laws and regulations And cleaning times may be ‘added based on different products More information, please consult manufactories. if machine will not be used one day continuously please clean distributing taps with clean rag.

Even though machine’ s components stainless steel, plastic and rubber are easy to clean as well s its shape, it i sill necessary to prevent germs and fungi reproduction due to halfway cleaning When the plug is not pulled out or the total switch is in the open state. do ot clean or maintenance the machine.

Empty Bowl
Before cleaning bowl, empty bowl Hi tis the first time to use, no need to make it empty ‘This manual just explains one bowl as sample Other bourls’ operations are the same based on related their buttons Please set the bow to *clean state”, then pour material from bowl.

Fig8

Disassembling the dispensing

Before removing the bow, it is recommend to disassemble the tap, after cleaning,, the tap must not be reapplied Until the bow has. been correctly positioned iniids seat.
Remove fastener with 2 screwdriver, then disconnect the dispensing handle by pushing upward, then push the piston and spring downward, remove the O-ring.
Put all spare parts in lukewarm water water temperature around 50°C) and clean s fig. 9
Do not disassemble taps when there are products or liquid in bowls.

Move out bowl and cover

Move out every bowl to clean the machine. Move out the bow as below steps:
Lift the top cover upward and take it out. Pull the tank upward ‘and outward to completely

remove it from i seat.
crewing off the nut
Take out the stirrer and the seal of stirrer

fig10

Clean and disinfect parts

All dismantled parts should be cleaned thoroughly
Importance: Cleaning way has to abice by local current hygiene standard..
Pour water in the container. mix sanitizer with water (Add 296 sodium hypochlorite to water)
‘Sponge with sanitizer clean bow, cover and evaporator thoroughly clean with water thoroughly Add sanitizer to another container.
Put dismantled parts in sanitizer 30 minutes Re clean with water thoroughly Make the parts dry.
Assemble machine under 7.Sinstruction, ‘Sponge with sanitizer clean the roof and the parts touching the raw material.

fig11

Retain 30 minutes
Clean bottom surface with water 2.3 times by the sponge. Put the cover at clean area and dry it by rag Ban cleaning by water or disinfecting before taking away the cover

Reset cleaned parts
All disinfected parts have to be reassembled carefully some parts need to be lubricated to work normally. Put gasket(A) on stirrer. see Fig 12

Importance: Check gasket n regular if broken. Please replace new one. Replace gasket(A) once at least one year

Using the Vaseline provided, lubricate the seal A) see Fig 13
Install seal (B),lubricate the entine surface with Vaseline as arrow marks see Fig 14
Put stirrer into the tank as Fig 14

Attention: Adjust the stirrer to appropriate location.

see Fig 14

Replace the seal ring. When the motor part leaks, you need to replace the seal ring
Take out the motor bracket connected to the motor and then replace the head seal ring (washer of axis, seal of axis)
When replacing. You need to ‘add some Vaseline Then install the motor bracket connected to the motor.
Fixed the stirrer and install the cover as Fig.15

Attention: Adjust the cover to appropriate location

Put in the gurde plate, install the cover along the direction of the slot, and keep the cover consistent with the motor seat. Install the roof as Fig 16
Press down top roof until s jintfit in with motor base.

Install taps as below instructions as Fig.17

Lubricate bolt totally with vaseline.
Insert screw when taps are steady.

Attention: lnstall all parts under figures instructions.If not lubricate with vasel1ne welt,matenal may permeate

Clean step

Before using this machine,below deaning steps are needed:

Fill bowl with water fully
Start machine only in cleaning mode and stir for 5 minutes.
Stop machine and open tap to clear container.

Clean water tray

Water tray should be emptied and cleaned everyday
- ATTENTION: All machine water trays should be cleaned. water 1ray need to upward be emptied and cleaned. Take out water tray by Lifting
Wash the tray and grid.separately with lukewarm water.Dry all Of the components.Fit the tray back in place and press down to secure it to the machine.Reposition the grid on top of the tray
- ATTENTION: When machine stopped, clean by wet rag and dry the parts

Replace bulb

Only when machine powers off and unplugged bulb can be replaced
According to below figure, open the small back panel, replace the LED bulb, after assembled put the panel back, confirm closed well

fig19

Clean condenser

Only professionals can clean condenser They know all operating steps well using approximate device and abide by local law and regulation strictly
Condenser needs to be cleaned in regular.
- Warning: Machine sharp surface may reveal after dismantling safety protection parts. Dirty condenser will weaken machine function
Condenser can be seen after taking out safety protection parts.
Even though only one plate (front or back or side)is not installed the machine s also banned to use. Operators are banned to clean condenser
Protection parts need to be positioned by Screwdrivers

Cleaning condenser of one-bowl slush machine
Safety protection parts need screwdrivers to fasten and dismantle.

Loose side panel screw.
Take out side panel
Dismantle safety protection parts. Brush dust from condenser surface with dry brush as Fig21

After cleaning condenser, reposition safety protection parts

Cleaning condenser of two-bowl slush machine

According to the following nstructions

Loose 3 crews of the back plate.
Loose 5 screws o the side plate.
Take out the side panel.

Dismantle safety protection parts. Brush dust from condenser surface with dry brush as below.

Scheduled maintenance

This machine needs to be maintained by professionals in regular (at least 1 year). Regular maintenance can ensure machine and its parts in good safety state Any broken parts need to be replaced with original manufacturer When any parts of machine are malfunctioned or broken machine s banned to use. The user can not maintain the machine himself

Setup Guide

Operating the Vevor Slush Frozen Drink Machine is easy and straightforward. Simply add ice and your desired liquid (such as fruit juice, soda, or alcohol) to the machine, and let it do the rest. The machine will automatically mix and crush the ingredients to create a smooth and delicious slushie or frozen drink. You can adjust the consistency of your drink by using the adjustable stainless steel blade. It's recommended to clean the machine after each use to ensure that it stays in good condition.

Manufacturer
The manufacturer’s details are shown on the identification plate

0perator
Based on different applications. ere are two types of persons

User
In accord with Health standard people trained complete techniques, Know all to distribute slush have below ability after reading this manual Place and change slush machine

Specialized technical people
Studied this manual and trained how to install use and maintain this slush machine, When serious fault,can repair the slush machine and know this manus well, Master all information of the manual and can explain the diagrams and graphs correctly; Know important hygienic knowledge well,prevent accident occuring, know technical and safety standard Have experience to serve this kind of slush machine. Master treatment measure to emergency find separated safety device and use the machine correctly

People are banned to use the machine who da not accord with above requirement

Manual distribution
Users have to read this manual carefully before using.

Function and content
Offer vital information of using and installing

2Who to read manual
Users and specialized technical people.

This manualis an inseparable part of the machine. Soit needs to be delivered to the purchaser when sold.

How to keep manual
Manual has to be placed nearby the machine and keep Intact and clear

Troubleshooting

Trouble	Potential problems	Solution
Can not tum on the machine	No input power	Insert the plug into the appropriate socket
Can not tum on the machine	Not pressed the switch	Press the switch
Outlet leaking	Outlet without Vaseline	Add Vaseline on outlet
Outlet leaking	Outlet broken	Change the outlet
Bowl leaking	The bowl not be installed in suitable position\|	Check the bowl position
	No Vaseline on bowl’s seal ring	Add Vaseline on seal ring
	Bad seal ring	Change the seal ring
The stirrer not working	Not turn on the main switch	Turn on the main switch
The stirrer not working	Bowl inside freezing	Turn off the main switch and let the ice melting
The machine not making slush	Not turn on the main switch	Turn on the main switch
	Not turn to the “SLS” mode	Turn to the “SLS” mode”
	‘The slush thickness is not suitable	Adjust the slush thickness
	Condenser too dirty/ poor ventilation	Clean the condenser
	Slush machine approach to the hot position	Putt The machine in 2 cool position
The stirrer makes noisy	Stirrer’s seal ring installation badly	Check and replace the seal ring
The stirrer makes noisy	No Vaseline on seal ring o seal ring broken	Add Vaseline or change the seal ring
No slush coming out from the outlet	Bowl inside freezing melting	Trun off the main switch and let the ice

Fault Codes and Solutions For Slush Machine

When the temperature sensor is not connected,”LL”is displayed
Check whether the temperature sensor is installed well. or the connecting wire is damaged or broken, replace the temperature sensor.

The temperature sensor is short-circuited and it displays “LL”
Check whether the temperature sensor is installed properly, or the connecting wires are damaged and connected together, orthe temperature measured by the temperature sensor exceeds 60°C replace the temperature sensor.

When the grid voltage is too high, the machine stops working and generates an alarm code “UH”

When the grid voltage is too low, the machine stops working and generates an alarm code “UL”

it is recommended that customers buy a voltage stabilizer, so that the voltage can be used within a reasonable range
Change the voltage alarm parameters without generating voltage alarm
1. In the power-on state, long press the” Settings” button for 3 seconds to enter the setting menu, and the window flashes as
2. Then click the “Settings” button, the window flashes as
3. Then click the” Slush softness” button to set the value to 0
4. Wait until the display does not flash, indicating that the setting is successful

The measured motor current is too high, the current channel generates an alarm and protects the shutdown ,the display code is SLS Err

the mixing shaft is blocked and the shutdown protection is caused, it will automatically restart after 5 minutes
If the motor s broken and rotates very slowly or cannot rotate, you need to replace a new
change the motor current alarm parameters and stop if no alarm is generated, and then check whether the motor i rotating
1. In the working state, long press the “Setting” button for 3 seconds to enter the setting menu, the window flashes as
2. Then click the “Setting” button, the window flashes
3. Then click the “Setting” button, the window flashes as
4. Then click the “slush softness” button to set the value to 0
5. Wait until the display does not flash, indicating that the setting is successful

Intelligent electronic valve system

Electrical diagram-XRJ3LX1

M	Compressor
M4	Cooling Fan
M1/M2/M3	AC geared motor
k	Touchpad
T	Transformer
LED	LED Light Board
S	Temperature sensor
F	Electromagnetic valve

Electrical diagram-XRJ3LX2

M	Cooling
M4	Cooling Fan
M1/M2/M3	AC geared motor
K	Main switch
A	Touchpad
T	Transformer
LED	LED Light Board
S	Temperature sensor
F	Electromagnetic valve

Electrical diagram-XRJ3LX3

M	Cooling
M4	Cooling Fan
M1/M2/M3	AC geared motor
K	Main switch
A	Touchpad
T	Transformer
LED1/LED2/LED3 LED light board
S1/S2/S3	Temperature sensor
F1/F2/F3	Electromagnetic valve

Slush machine explosive diagram

Code	Parts Name	Code	Parts Name
1	Roof	29	Panel
2	The roof for handle	30	Side plate fixing screw
3	Tank	31	Frontall panel
4	The small Pin of the handle	32	Switch
5	Handle	33	Back panel
6	Pin of the handle	34	PCB board
7	Wrench bracket	35	Mainboard
8	Spring	36	Plate nut
9	Plunger	37	Backboard
10	The cover of handle	38	Base panel for 2 tank
11	Vice-Pin of the handle	39	Copper bush
12	Hex nut	40	Motor
13	Condenser	41	The back panel for motor
14	Fan	42	Back mounting screw
15	The fixed bolt for fan motor	43	Spring
16	Fan motor	44	Stirring rods
17	The holder for fan motor	45	The holder of motor
18	The roof of water tray	46	Motor fixed screw
19	Water tray	47	The main board for light
20	Front panel	48	Lampshade
21	Pipe	49	The holder for stirrer
22	Jambe	50	Evaporator
23	Transformer	51	Tank seal ring
24	Main body frame	52	Seal of mixing auger
25	Rubber foot	53	Mixing auger
26	Compressor	54
27	The screw of compressor	55
28	The nut of compressor	56

Vevor XRJ3LX3 Slush Frozen Drink Machine Pros & Cons

Pros

Stylish and compact design
High-powered motor and adjustable blade
Easy to use and clean
Large capacity for multiple servings

Cons

May be pricier than some other slush machines
Limited to making only frozen drinks

Customer Reviews

Customers rave about the Vevor Slush Frozen Drink Machine, praising its sleek design, ease of use, and delicious results. The machine is perfect for making refreshing slushies and cocktails for parties and gatherings, and many customers appreciated its large capacity and adjustable blade. However, some customers noted that the machine can be loud and bulky, and that the price point is higher than some other slush machines on the market.

Search Manuals in: slush-frozen

Read More