Introduction of Portable Power Station

The Anker Solix Portable Power Station C1000X is a cutting-edge energy solution designed for outdoor adventures and emergency backup needs. With a robust 1056Wh lithium iron phosphate (LiFePO4) battery, it provides reliable power for various devices, featuring a continuous output of 1800W and surge capability of up to 2400W. Compact and versatile, the C1000X is priced at approximately $999.99. The innovative HyperFlash technology allows for rapid charging in just 58 minutes.

Specifications

Cell Capacity	1056Wh
AC Input Voltage	120V~ 12A Max, 60Hz
AC Input Power (Charging)	1000W Max
AC Input Power (Bypass Mode)	1440W Max
AC Input Power (Ultra Fast Recharging)	1300W Max
Solar Panel Input	11-32V 10A; 32V-60V 12.5A (600W Max)
Car Charger Output	12V 10A
AC Output	120V~ 15A, 60Hz, 1800W Max
USB-A Output	5V 2.4A (Per Port)
USB-C Output (100W)	5V 3A / 9V 3A / 15V 3A / 20V 3A / 20V 5A (100W Max)
USB-C Output (30W)	5V 3A / 9V 3A / 12V 2.5A (30W Max)
UPS	20ms
Discharging Temperature	-4° F – 104° F / -20° C – 40° C
Charging Temperature	32° F – 104° F / 0° C – 40° C
Size	14.8×8.07×10.5 in / 37.6×20.5×26.7 cm
Net Weight	12.9 kg / 28.44 lb

What’s in the Box

ANKER SOLIX C1000 Portable Power Station - Box

Overview

Product Overview

1. Ambient Light Button	2. Ambient Light
3. Main Power Button	4. Reset Button
5. Lot Button	6. AC Outlet Button
7. AC Output Ports	8. Car Socket Button
9. Car Socket	10 LCD Screen
11 USB Ports	12 AC Input Port
13 Overload Protection Switch	14 Solar / Car Input Port
15 Expansion Battery Port

LCD Screen Guide

ANKER SOLIX C1000 Portable Power Station - LCD Screen

Car Charging
USB-C Output
IoT:
Press the IoT button once to turn on Bluetooth and Wi-Fi, and connect your devices through the app when this icon appears on the screen.
Press the IoT button for 2 seconds to turn off Bluetooth and Wi-Fi.
Press the IoT button for 7 seconds to reset Bluetooth and Wi-Fi.
Low-Temperature Alert: When this icon shows, stop using the power station until the icon disappears.
Overload Warning:
This icon appears when a port is overloaded. The port will be turned off to avoid any damage. Please remove the device causing overload.
High-Temperature Alert:
When this icon shows, stop using the power station and let it cool down until the icon disappears.
Remaining Power for Expansion Battery:
When the expansion battery is connected successfully, this icon appears on the screen.
USB-A Output
AC Charge and Voltage Frequency
Remaining Power Station Battery
Estimated Time to Fully Recharge
Estimated Time for Battery to Deplete
Current Input Power
Current Output Power

Description

Power Station C1000X features a sleek and rugged design, making it both aesthetically pleasing and durable. The power station includes multiple output ports, allowing you to charge multiple devices simultaneously. The 1000W pure sine wave AC output ensures safe and efficient power for sensitive electronics. The device also supports various recharge methods, including solar panels, wall adapters, and car chargers, providing flexibility in different scenarios.

Recharging Your Power Station

AC recharging (1000W Max)
Recharge your power station by connecting to a wall outlet with the AC charging cable.

ANKER SOLIX C1000 Portable Power Station - Power Station

UltraFast Recharging (1300W Max)
The Ultra Fast feature gives your power station a maximum 1300W recharge via the AC charging cable. You can enable or disable this feature in the Anker app.
Recharging at a normal speed can best protect the battery. We recommend using Ultra Fast recharging when necessary.
Solar Panel Recharging (600W Max)
Recharge your power station with a maximum solar input of 600W by connecting up to two solar panels, as shown in the figure, with a solar charging cable.

ANKER SOLIX C1000 Portable Power Station - Solar Panel

Car Recharging
Recharge your power station by connecting to a car’s output port with the car charging cable.

ANKER SOLIX C1000 Portable Power Station - Car Recharging

When your portable power station only has 1% battery remaining, the “Remaining Battery” indicator will flicker to remind you to recharge.

Powering On / Off

ANKER SOLIX C1000 Portable Power Station - Button

Press the main power button for 3 seconds to turn your power station on or off.
When the “Remaining Battery” indicator shows on the LCD screen, your power station is ready to charge devices.

When powered on, press the main power button to turn the screen on or off.
The screen will automatically turn off after 30 seconds of lighting up. The auto-off time can be set in the Anker app.
With the output buttons turned off and no other loads for 12 hours, the power station will power off automatically. The standby duration can be set in the Anker app.

Powering Your Devices

AC Charging
Press the AC outlet button and connect your device with the AC output ports.
The AC outlets can intelligently identify whether a plug is inserted. This helps prevent power waste by automatically turning off the power station if no plug is detected for more than 15 minutes.

ANKER SOLIX C1000 Portable Power Station - AC Charging

USB Charging
Connect your devices to the USB ports.

ANKER SOLIX C1000 Portable Power Station - USB Charging

Car Socket Charging
Turn on the car socket and connect your devices to start charging.

ANKER SOLIX C1000 Portable Power Station - Socket

Uninterruptible Power Supply (UPS)

To use the UPS feature, connect your power station to a wall outlet with the AC charging cable, then press the AC outlet button and connect your devices via the AC output ports.

ANKER SOLIX C1000 Portable Power Station - Power Supply

Surge Pad

Using the Surge Pad feature, the power station can power high-wattage devices up to 2400W without overload.

Surge Pad automatically turns on when the total output exceeds the rated output, allowing the power station to deliver rated power to high-wattage devices.
Surge Pad does not function in bypass mode (when the power station is being charged with the AC output on).
Surge Pad works better with devices that generate heat, but does not support precision instruments and other devices that have voltage protection or strict voltage requirements. To see if Surge Pad™ works with your high-wattage device, try powering it with the last AC outlet.

ANKER SOLIX C1000 Portable Power Station - Power Supply1

Connecting with an Expansion Battery
Your power station can be connected with an expansion battery to double the capacity to 2112Wh. Please refer to the user manual of Anker SOLIX BP1000 Expansion Battery (1056Wh) for detailed instructions.

ANKER SOLIX C1000 Portable Power Station - Battery

Anker App for Smart Control

You can remotely control your power station using the Anker app.

Download the Anker app from the App Store (iOS devices) or Google Play (Android devices), or by scanning the QR code.
https://dl.anker.com/qcdl?flow=charging
Connect the device to a network before using the app for the first time. After connecting successfully, you can connect your device off-grid.
Firmware update: You will be informed once a new firmware version is detected when you connect the power station to the app. During the update, ensure the power station is being charged through the AC input port and connected to Wi-Fi.

Setup Guide

To set up your Anker, follow these steps:

Unbox the power station and ensure all components are included.
Charge the power station using the wall adapter, car charger, or solar panel.
Connect your devices to the appropriate output ports (USB-A, USB-C, DC, or AC).
Turn on the power station by pressing the power button.
Monitor the battery level and charging status through the LCD display.

The power station is designed for easy operation and does not require complex assembly or configuration.

Light

Ambient light
Press the button once to turn on the ambient light, and press again up to 2 times to switch between brightness levels.

SOS Mode
Hold the button for 2 seconds to activate SOS mode.

ANKER SOLIX C1000 Portable Power Station - Light1

Troubleshooting

If you encounter any issues with your Anker Solix Portable Power Station C1000X, here are some common problems and solutions:

No Power Output: Check if the power station is charged and turned on. Ensure that the output ports are not overloaded.
- Allow the power station to cool down and try recharging it again.
Disconnect all devices and check for any short circuits.
- Always follow the user manual and safety guidelines to avoid any potential risks.

Pros & Cons

Pros:

High Capacity: 1000Wh battery provides long-lasting power.
Multiple Output Ports: Supports various devices simultaneously.
Advanced Safety Features: Overcharge, short-circuit, and temperature protection.
Compact and Lightweight: Easy to carry around.
Versatile Recharge Methods: Solar panel, wall adapter, car charger.

Cons:

Cost: Higher price point compared to smaller models.
Weight: Though compact, it may still be heavy for some users.
Size: May not fit in very small spaces due to its dimensions.

Customer Reviews

Customers have praised the Anker Solix Portable Power Station C1000X for its reliability, high capacity, and ease of use. Many have found it to be a valuable asset during camping trips and power outages. However, some users have mentioned that the price is a bit steep and the weight can be a challenge for extended carry.

Search Manuals in: solix

Read More