Introduction

The Yale Home Door Lock YDM4109 is a cutting-edge biometric lock designed for modern security needs. It features one-touch fingerprint verification, allowing for quick and easy access, and supports up to 20 fingerprints. The lock also includes a smart touchpad, voice guidance, and multiple access methods, including PIN codes and a physical key. With its sleek design and advanced technology, the YDM4109 offers both convenience and security for residential and light commercial applications.

Specifications

Parts	Specifications	Remarks
Front (Front Body)	68.6(W) X 320.7(H) x 40.1(D)mm	Operating temperature: -15~~55°C (5~~131°F)
	Zinc die-casting
Back (Main Body)	72.8(W) X 306.6(H) x 37.0(D)mm
	Fiber-glass
Lever	Zinc die-casting
Battery	4EA 1.5V AA alkaline batteries	Last up to 1 year (10 times used a day)
	(Operating voltage: 4.5 ~ 6 V)
Lock case	Steel and SUS304
Option	Remote Control
	Z-wave
	Zigbee	Wireless
	BLE module	Optional

Battery life may vary depending on temperature, moisture levels, frequency of use, and the quality of the batteries.
Please make sure that all parts are included when purchasing the product.
Optional products may not be available depending on your country or local dealer.

Yale Home Door Lock YDM4109 Identification

Front body

(Front Body, Installation on the outside of the door)

Fingerprint Operation Lamp
Keypad(10-Key)
Dead Bolt Jam Lamp
Lever
Fingerprint Cover
Battery Change Lamp
Reset button
Emergency Key
Emergency Power Supply Terminal
Emergency Cover

Main body

(Main Body, Installation on the inside of the door)

Battery Cover
Slot for Remote control module (Option)
Registration button
Lever
Safe handle button
Manual thumb turn
Internal Forced Lock Switch
1. 5V AA Alkaline Batteries
Auto/ Manual Lock button
Volume Control Switch
Lock case
Latch Bolt +
Automatic Locking Sensor
Dead Bolt

Yale Home Door Lock YDM4109 Features

Alarmed Door Lock
Yale Digital door lock has a built-in damage alarm. If the keypad area is damaged an alarm will sound.
One-touch Fingerprint Verification Method (Easy Scan)
Easy Scan technology has been applied to read a fingerprint in one shot conveniently.
Electronic Code System
You can open the door conveniently with Code.
Yale Digital door lock gives you the freedom and convenience of key-free.
Emergency power backup
A 9V battery source is available if your batteries run out.
Fake Code
To prevent the Code from being exposed.
Yale Digital door lock allows you to enter decoy numbers before or after entering your Code.
Auto Locking
The handle automatically disengages on the outside once you have entered your home, preventing anyone from following you.
Remote control System (Optional)
Use a Remote control to unlock/Lock your door "remotely".
Zwave / Zigbee (Optional)
Use them to connect with the Controller.
BLE (Optional)
Use it to pair with a Smartphone.

Components Overview

Basic Contents

The contents of this product may be subject to change without notice for performance or quality improvement.

Tools Required

4 AA Batteries
Emergency Keys
Screws

Optional Accessory

Remote controller
Remote control module
Z-wave module
Zigbee module
BLE module

Quick Menu

Quick Menu Icon

Creating a User PIN code

Creating a user PIN code must be performed upon Installation or after resetting the lock to factory default. Programming and use of the lock is not possible until this step has been successfully completed.

Press (!) button
Enter New User Code.
Press the (!) button to complete.

Normal mode

Advanced Mode

User Code Registration (4 ~10 digits)

Press I button.
Enter New User Code.
Press the I (Registration) button to complete.

User Fingerprint Registration (Up to20ea)

user_fingerprint_registration_yale_home_door_lock_ydm4109.png

Press I button.
Press the [ *] button to continue.
After opening the cover, swipe your finger 3 times through the fingerprint sensor followed by the voice guide.
OR
Press the [ *] button to continue.
Press I button to complete.

Caution

Make sure to leave the door open when registering User Code and Fingerprints because you may accidentally lock the door while trying to register or change a credential.
The previously registered User Code will automatically be deleted when a new credential is registered.
It is recommended to change the User Code regularly.
It is impossible to make the same number for Master code / Visitor code /Onetime code/User code.

Description

The Yale Home Door Lock YDM4109 is more than just a lock; it's a complete home security solution. With its advanced features and compatibility with most home automation systems, you can have peace of mind knowing that your home is secure. The lock is easy to install and use, and its touchscreen keypad is user-friendly, even for children and elderly family members. The YDM4109 also comes with a physical key as a backup, so you'll never be locked out of your home. Its built-in alarm and auto-lock feature provides additional layers of security, making it one of the best smart locks on the market today.

Configuration

Change the Master Code

Enter the Master Code.
Press the (I) button.
Enter [ 7 ] , and [# ] buttons to change the Master code.
Enter the New Master Code and [# ] button.
Again enter the Master Code and [ t:I:] button.
Press the [*] button to continue.
OR
Press the (I ) button to complete

Register User Code

Enter the Master Code.
Press the (I) button.
Enter [ ] , and [ # ] buttons.
Enter [ 1 ] , and [U] buttons to register the User code.
Enter the User number (01-30) and [ # ] button.
Enter the User Code (4 -10 digits) and [ # ] button.
Press the [ *] button to continue.
OR
Press the (I) button to complete.

Delete User Code

Register Fingerprint

Enter the Master Code.
Press I button.
Enter [ 3 ] , [#] buttons.
Enter [ l ] , [# ] buttons to register fingerprint .
Enter the User number (01-20) and [#] button.
After opennig the cover, swipe your finger 3 times through the fingerprint sensor followed by the voice guide.
Press [ *] button to continue.
OR
Press the I button to complete.

Delete Fingerprint

Register Onetime Code

Enter the Master Code.
Press I button.
Enter [ 4], [#] buttons.
Enter [ 7 ] , and [ # ] buttons to register the Onetime Code.
Enter Oneti me Code (4 digits) and [# ] button.
Press [*] button to continue.
OR
Press I button to complete.

Delete Onetime Code

Delete All Credentials

Enter the Master code.
Press the (I) button.
Enter [ s ] , [ # ] buttons.
Enter the Master code and [ #] buttons.
Press the [ *] button to continue.
OR
Press the (I) button to complete.

Lock Setting

Change to Normal mode
Language Setting

Register Remote control

Enter the Master Code.
Press the CD button.
Enter [ B ] , and [ # ] buttons.
Enter [ l ] , and [ # ] buttons to register the Remote control.
Enter the User Number (01-05) and [# ] button.
Press the registration button on the Remote controller and press[ # ] to complete after the beep sound from the digital door lock.
Press the [*] button to continue.
OR
Press the CD button to complete.

register_remote_control_yale_home_door_lock_ydm4109.png

Delete Remote control

Register Controller

Enter the Master Code.
Press the (I) button.
Enter [ 9 ] , [# ] buttons.
Enter [ 7 ] , and [#] buttons to register the controller.
Register Controller followed by pressing [ # ] button to complete after the beep sound from the digital door lock
Press the [ *] button to continue.
OR
Press the (!) button to complete.

Delete Controller

Setup Guide

To set up your Yale Home Door Lock YDM4109, follow these steps:

Install the lock on your door using the included hardware and instructions.
Download the Yale app on your smartphone and create an account.
Follow the app's instructions to connect your lock to your Wi-Fi network and home automation system.
Create unique access codes for your family members and guests.
Test your lock to ensure it's working properly.

Troubleshooting

If you encounter any issues with your Yale Home Door Lock YDM4109, try these troubleshooting steps:

Make sure your lock is connected to a power source and the LED light is on.
Check your Wi-Fi connection and make sure your lock is connected to the same network as your smartphone.
Restart your lock and try again.
If you're still having issues, contact Yale customer support for further assistance.

Emergency Power

Emergency power supply for discharged batteries In case the batteries are dead, you can open the door by using a 9V battery as shown.

To supply emergency power

Place the 9V battery onto the emergency power supply terminal.
Touch the keypad with your palm.
Enter the registered Code on the keypad.
Touch the keypad with your palm or Press the [ * ] button to confirm and replace the batteries.

Power supply

Expiry Date
- The product uses four 1.5V alkaline AA batteries. They may sustain 1 year if used 10 times a day.
  (Users are advised to use authentic alkaline batteries.)
Low battery alarm
You must replace all 4 batteries in the following cases:
- The Low Battery LED on key pad flickers red. a
- When low battery notification message is played.

RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE NATIONAL CODE OR RECYCLING PROGRAM

Note

The battery life varies according to ambient temperature, humidity, the frequency of use, and the quality of the battery.
Do not use rechargeable batteries. Only alkaline batteries are recommended.

Pros & Cons

Pros

Keyless convenience and enhanced security
Compatible with most home automation systems
Sleek and modern design
Touchscreen keypad with anti-tamper alarm
Auto-lock and anti-pick protection

Cons

May be more expensive than traditional locks
Requires Wi-Fi connection for remote access

Search Manuals in: ydm4109

Read More