Trendnet 1-Port Multi-Function USB Print Server TE100-MFP1 User Manual

Trendnet 1-Port Multi-Function USB Print Server TE100-MFP1 Manual

The trendnet 1-Port Multi-Function USB Print Server TE100-MFP1 connects a USB printer or multifunction device to a wired network, allowing multiple computers to access printing, scanning, and fax functions from shared workstations. Its compact design combines a 10/100 Mbps Ethernet port with a USB 2.0 Type-A port for practical office and home-network use.

This print server is designed for users who need to share one USB printer without connecting it directly to a single computer. Small offices, home offices, classrooms, and workgroups can place the printer near a router or network switch while authorized computers access it over the local network.

The device supports standard printers and compatible multifunction peripherals. The TRENDnet USB Control Center utility helps computers connect to and manage the attached USB device. With DHCP support, the print server can receive a network address automatically from a compatible router.

Its Auto-MDIX Ethernet port simplifies wired installation because it automatically detects the required cable connection. Status LEDs provide quick visual information about power, network activity, and USB connectivity. Because this is a discontinued model, confirm operating-system compatibility and obtain required software before deployment.

TE100-MFP1 Specifications and Features

• Product type: One-port wired USB multifunction print server.
• Network interface: One 10/100 Mbps Auto-MDIX Ethernet port.
• USB interface: One USB 2.0 Type-A port with USB 1.1 compatibility.
• Supported network standards: IEEE 802.3 10Base-T and IEEE 802.3u 100Base-TX.
• Network addressing: DHCP-supported TCP/IP configuration.
• Connected devices: Up to 127 USB devices are listed in the product documentation; practical operation depends on the attached device and network configuration.
• Status indicators: Power, WLAN, LAN, and USB LEDs, depending on hardware revision.
• Management software: TRENDnet USB Control Center utility.
• Documented operating systems: Windows XP, Vista, and Windows 7 in 32-bit or 64-bit editions; Mac OS X 10.4 through 10.7.
• Dimensions: Approximately 75 × 58 × 24 mm.
• Weight: Approximately 62 g.
• Operating temperature: 5 to 40°C.
• Storage temperature: -10 to 60°C.
• Maximum power consumption: Approximately 2.04 W.
• Power adapter: Use only the supplied adapter with the voltage and current rating printed on the device or adapter label.

How to Set Up the Trendnet 1-Port Multi-Function USB Print Server TE100-MFP1

1. Place the print server near the router, Ethernet switch, and USB printer. Keep the unit dry, ventilated, and away from heat sources.
2. Connect the TE100-MFP1 Ethernet port to a LAN port on a router or network switch using an Ethernet cable.
3. Connect the supplied power adapter to the print server and a suitable electrical outlet. Turn the power switch on.
4. Connect the printer or multifunction device to the USB port, then power on the printer.
5. Check the LEDs. Power and LAN indicators should show that the device has power and a network link; the USB indicator should respond when the printer is detected.
6. Install the TRENDnet USB Control Center utility on each computer that needs access to the shared USB device.
7. Open the utility, locate the TE100-MFP1, and connect to the printer. Install the printer manufacturer's driver when prompted.
8. For scanning or faxing, use the multifunction device software after connecting through the control utility. Only one computer may be able to control certain USB functions at a time.

If the device does not appear, verify that the computer and print server are connected to the same local network, check the Ethernet cable, and restart the router, print server, and printer in that order. Never use a damaged power adapter or operate the unit near water.

TE100-MFP1 Troubleshooting Guide

Print server is not detected

Confirm that the Power and LAN LEDs are active. Try another router or switch port and replace the Ethernet cable if necessary. Ensure the computer is on the same network and that the router's DHCP service is enabled.

Printer is unavailable

Check the USB connection, restart the printer, and confirm that the USB LED responds. Close the USB Control Center on other computers if another workstation has reserved the device. Reinstall the printer driver if the queue remains offline.

Printing stops or jobs remain queued

Cancel stalled jobs, power-cycle the printer and print server, and reconnect through the control utility. Avoid disconnecting the USB cable while a print, scan, or fax operation is active.

Scanning or faxing does not work

Install the multifunction device's full software package, not only a basic printer driver. Connect the device through the TRENDnet utility before opening the scanning or fax application. Compatibility may vary by operating system and peripheral model.

Error codes and support

The available documentation does not define a universal TE100-MFP1 error-code table. Record the LED condition, operating system, printer model, and troubleshooting steps before contacting TRENDnet support. Because the TE100-MFP1 is discontinued, support materials and compatibility may be limited. Warranty service generally requires contacting TRENDnet within the applicable warranty period and providing dated proof of purchase.

TE100-MFP1 Pros and Cons

Advantages

• Shared USB access: Lets multiple networked computers use one compatible printer or multifunction device.
• Multifunction support: Can provide access to printing and, with compatible hardware and software, scanning and fax functions.
• Simple wired networking: The 10/100 Mbps Auto-MDIX port works with standard Ethernet networks and does not require manual crossover-cable selection.
• Compact installation: Its small enclosure fits beside a router, switch, or printer.
• Low power use: The documented maximum consumption is approximately 2.04 W.

Limitations

• Legacy software: Officially documented operating systems are older Windows and Mac OS X releases, so modern computers may require compatibility testing.
• Wired only: It does not provide a modern wireless network connection despite certain documentation revisions listing WLAN indicators.
• Single USB port: Unlike newer network print servers, it is intended for one directly attached USB device.
• Discontinued model: Replacement software, drivers, and technical support may not match current operating systems.
• Best suited for: Legacy printers and small wired networks. Users needing current wireless printing, cloud printing, mobile printing, or guaranteed support for modern operating systems should consider a current print-server solution or a printer with built-in networking.