Introduction OF Aqueon Mini Heater 06194

The Mini Heater 06194 is a fantastic choice for those looking for a compact and efficient heating solution for their small aquariums. This fully submersible heater is perfect for tanks up to 5.5 gallons and offers adjustable temperature settings between 68 to 88°F (20 to 31°C). With an estimated price range of $10 to $15, this mini heater is an affordable option for beginner aquarists. The Mini Heater 06194 was launched in 2017, providing a reliable and long-lasting performance.

Detailed Specifications

Key features of the Aqueon Mini Heater include

• Fully submersible design, allowing for versatile placement options
• Shatterproof and durable construction, ensuring safety and longevity
• Adjustable temperature settings with an easy-to-read temperature dial
• Automatic shut-off function for added safety, preventing the heater from overheating
• LED indicator light that shows the active heating status
• Small footprint and slim profile for compatibility with nano and pico aquariums
• Easy to use and install, with included suction cups for secure mounting

Description Of Aqueon Mini Heater 

The Mini Heater 06194 is an ideal choice for aquarists seeking a reliable, efficient, and affordable heating solution for their small aquariums. Its compact size and fully submersible design make it easy to position and conceal, while the adjustable temperature settings cater to the needs of various aquatic species. This mini heater's durability, safety features, and easy setup process make it a popular choice for beginners and experienced aquarists alike.

Setup of Aqueon 06194

To set up the Aqueon Mini Heater , follow these steps

1. Rinse the heater under warm water to remove any manufacturing residue.
2. Set the desired temperature on the temperature dial.
3. Attach the suction cups to the heater, then place it in the aquarium at the desired location.
4. Ensure the heater is fully submerged and that the suction cups hold it securely.
5. Plug in the heater and wait for the LED indicator light to turn on, confirming that it is functioning correctly.

OPERATING INSTRUCTIONS

• Attach the suction cups to the heater, locating in the specific holes.
• Place the heater inside the aquarium in an area with good water circulation.
• Allow 30 minutes time to elapse before plugging in the heater.
• If the ambient air temperature is higher than 78 degrees (such as during the summer), it is recommended to remove the heater.
• The heater requires no maintenance other than periodically cleaning algae and debris from the heater body exterior.
• Always unplug heater before removing and servicing it.

IMPORTANT SAFETY INSTRUCTIONS

WARNING: To guard against injury, basic safety precautions should be observed including the following
DANGER: To avoid possible electric shock, special care should be taken since water is employed in the use of aquarium equipment. For each of the following situations, do not attempt to repair yourself; return the appliance to an authorized service facility for service or discard the appliance.

1. If the appliance shows any sign of abnormal water leakage, immediately unplug it from the power source.
2. Carefully examine the appliance after installation. It should not be plugged in if there is water on the parts not intended to be wet.
3. Do not operate any appliance if it has a damaged cord or plug, or if it is malfunctioning or if it is dropped or damaged in any manner.

4. To avoid the possibility of the appliance plug or receptacle getting wet, position Heater aquarium stand and tank to one side of the wall mounted receptacle to prevent water from dripping onto the receptacle or plug. Aquarium A "drip loop", shown in the figure below, should be arranged by the user for each cord connecting an aquarium appliance to the receptacle. 

   

   1. The "drip loop" is the part Power Supply Cord of the cord below the level of the receptacle, or the connector if an extension cord is used, to prevent water travel along the cord and coming in contact with the receptacle. If the plug or the receptacles do get wet, Do NOT unplug the cord. Disconnect the fuse to the circuit breaker that supplies power to the appliance. Then unplug and examine for the presence of water in the receptacle.
   2. Close supervision is necessary when any appliance is used by or near children.
   3. To avoid injury, do not contact moving parts or hot parts such as heaters, reflectors, lamp bulbs, and etc.
   4. Always unplug an appliance from the outlet when not in use, before putting on or taking off parts, and before cleaning. Never yank the cord to pull plug from the outlet. Grasp the plug and pull to disconnect.
   5. Do not use an appliance for other than intended use. The use of attachments not recommended or sold by the appliance manufacturer may cause an unsafe condition.
   6. Do not install or store the appliance where it will be exposed to the weather or to temperatures below freezing.
   7. Make sure an appliance mounted on a tank is securely installed before operating it.
   8. Read and observe all the important notices on the appliance.
   9. If an extension cord is necessary, a cord with a proper rating should be used. A cord rated for less amperes or watts than the appliance rating may overheat. Care should be taken to arrange the cord so that it will not be tripped over or pulled.

The Aqueon Mini Heater is meant for aquariums up to 5 gallons. The unit is equipped with a thermal cut-off safety fuse that will turn the heater off automatically if the unit overheats such as by being left out of the aquarium.

Troubleshooting

Here are some common problems and solutions for the Aqueon Mini Heater 

If problems are encountered
If the appliance has been installed for 24 hours or more, and the temperature of the water is still much lower than the required temperature (make sure however, as a number of thermometers on the market are not accurate!), proceed as follows:

• Make sure that the appliance is plugged in and is receiving power. 
• Make sure that the appliance is submerged at least to the "MINIMUM WATER LEVEL" line.
• Make sure the water circulation around the appliance is adequate.
• Make sure that the volume of the aquarium falls within the range indicated on the label attached to the appliance. 
• Make sure that the unit is not covered with limescale. If necessary remove scale after the appliance has been unplugged. If the temperature is too high, after the appliance has been working for

24 hours or more, proceed as follows

• Check whether too much water has evaporated, consequently reducing the volume to such an extent that it no longer falls within the range given on the label. If this is the case, add water immediately.

Warranty of Mini Heater 06194

Usually, the Aqueon Mini Heater 06194 has a restricted 90-day warranty. Keep your receipt and contact Aqueon customer support with the specifics of the problem to initiate a claim.

Pros & Cons of Aqueon 06194

Pros

• Compact and fully submersible design
• Affordable price range
• Adjustable temperature settings and safety features
• Durable and shatterproof construction
• Easy to install and use

Cons

• Not suitable for tanks larger than 5.5 gallons
• No temperature preset memory function

Customer Reviews of Aqueon Mini Heater 06194

Aqueon Mini Heater has received positive customer reviews, with many praising its compactness, ease of use, and reliability. The adjustable temperature settings and safety features, including the automatic shut-off, are also well-received by users. However, some customers have mentioned that the Aqueon Mini Heater 06194 may not maintain a consistent temperature in very cold environments, and the temperature settings are relatively limited in range.