Introduction

The Vava Baby Monitor Camera VA IH006 is a state-of-the-art baby monitoring solution designed to provide parents with peace of mind. Featuring a large 5-inch HD display with 720p resolution, it ensures clear visuals of your little one, day or night, thanks to its night vision capabilities. The monitor supports two-way talk, allowing parents to soothe their baby remotely, and can connect up to four cameras for comprehensive coverage. Priced at approximately $154.97, it combines functionality and affordability for modern parenting needs.

PACKAGE CONTENTS

Baby Monitor & Camera (Model: VA-IH006)
Monitor Adapter with USB-C Charging Cable
Camera Adapter
Micro-USB Charging Cable
Quick Start Guide
User Guide

SPECIFICATIONS

Monitor

Model	VA-IH006
Sonix IC	SN93700
Resolution	IPS (720 x 1280), PPI=293
Connectivity	2.4GHz
Image Aspect	16:9 (HD720)
Image Compression	h.264 (frame rate = 18fs)
Operating Range	280 - 300m (antenna vertically positioned at90°)
Temperature Alert	Yes
Volume Control	8 levels
Brightness	8 levels
Antenna	Rotatable (max. 90 degree)
Power Input	5V / 1.5A (1.5m long USB C cable)
Zoom	Zoom In (2X) Zoom In (4X) Auto-Pilot (2 cycles)
Two-Way Talk	Yes
Multi-Camera	Max. 4 cameras
Storage Temperature	-10°C ~ 55°C / 14 - 131°F
Operation Temperature	0°C ~ 40°C / 32 - 104 °F

Camera

Cmos	720p (1280x720), 3.0M, 1/4"
Connectivity	2.4GHz
Image Compression	h.264 (frame rate = 18fs)
Power Input	5V / 1.2A, 2.5m-long Micro-USB cable
Pan-n-Tilt	108 degrees vertical (Up=90, Down=18) 270 degrees horizontal (Left=135, Right=135)
Zoom	Zoom In (2X) Zoom In (4X) Auto-Pilot (2 cycles)
View Angle	Vertical: 1.5m, Horizontal: 1.4m
Lens Focal Length	1.5m to infinity
Night Vision	Black & White image, up to 2m clear range
IR LED	Non-visible IR LED with wavelength 940nm (x 12 pcs)
Light Sensor	Yes
Two-Way Talk	Yes
Storage Temperature	-10°C ~ 55°C / 14 - 131°F
Operation Temperature	0°C ~ 40°C / 32 - 104 °F

PRODUCT DIAGRAM

Baby Monitor

Antenna
Volume Indicators
Microphone
Charging Indicator
Power Indicator
Menu Button
Zoom Button
Left Button
Up Button
Right Button
OK Button
Down Button
Talk Button
Power Button
Upgrade Pinholes
Back Stand
Speaker
USB-C Port

Camera

Camera Vents
Camera Antenna
Micro-USB Port
Temperature Sensor
Reset Pinhole
Power Switch
Speaker
Lens
Pairing Button
Mounting Hole

GETTING STARTED

Charging & Powering Baby Monitor
- Connect the monitor adapter to the monitor and a power outlet.
- Unplug the unit when its power indicator turns off, indicating a full charge.
- Press the Power button on the monitor to power on with the power indicator lighting green.
Powering Camera
- Connect the camera to power source via the Micro-USB cable and camera adapter.
- Slide the Power Switch on camera to power on. Make sure the power indicator light is green.
  - Only use the power adapters included in the package.
  - Do not place the camera and power cord within the reach of your baby.
Pairing the Baby Monitor & the Camera
By default, one camera has been paired with the monitor when manufactured. When you power on the monitor and camera, the two will automatically pair. To add more cameras, press the Pair Button at the bottom of the camera, press Menu button, select through and then the monitor will auto-pair with the camera.
Placing the Camera
Place the camera 1.5-2m / 4.9-6.6ft away from your baby for safety reason and for a better view when in night vision mode.
Wall Mounting Camera
- Select the spot to mount the camera, keeping it beyond your baby’s reach.
- Insert the screw (not included) pre-installed on wall into the mounting hole of the camera.
Wide-Angle Lens (Optional)
The aluminum lens hood (no special video effects) has been installed when the camera was manufactured.
To install wide-angle lens (sold separately), simply rotate the original lens hood counterclockwise to remove. Then install the new lens and rotate clockwise to fix in place.

Description

The Vava Baby Monitor Camera VA IH006 features a streamlined and small design that integrates effortlessly into any nursery aesthetic. The camera is lightweight and may be effortlessly mounted on a wall or positioned on a shelf. The 1080p high-definition video feed guarantees great pictures, even in low-light circumstances, due to the infrared night vision capability.
The bidirectional audio permits parents to comfort their infant from a distance, while the motion tracking capability allows the camera to monitor the baby's movements. The gadget is equipped with temperature sensors that notify parents if the room temperature strays from a safe range.
The Vava app, compatible with both iOS and Android, enables remote access to the video stream, enabling parents to monitor their kid from any location. This application accommodates multiple users, enabling simultaneous monitoring of the infant by both parents.

FUNCTIONS & OPERATIONS

Monitor Interface Overview

Top Status Indications

	Signal	4 levels
	Current Camera	Camera 1 / Camera 2 / Camera 3/ Camera 4
	Zoom	2X / 4X
	Current Temperature	°C / °F
	Night Vision	Auto ON in a dim environment
	Current Time	AM / PM
	Alarm	ON / OFF
	Mute	Mute all system sounds
	Talk-back	ON / OFF
	Battery	5 levels

Bottom Menu Brief

	Add Camera	Max. 4 cameras
	View Camera	Select to view each at a time
	Delete Camera	Select to delete cameras
	Speaker Volume	0-7 levels (mute when it’s 0)
	Brightness	1-8 levels
	Camera	To add / view / delete cameras
	Alarm	OFF / 2Hr / 4Hr /6Hr / Set Time (hour / minute / AM, PM)
	Settings	Time System sound volume Temperature scale Auto-sleep time Restore to factory setting Customer service contacts

Monitor Settings
Press Menu Button, Left and Right Buttons, and then OK Button to set the monitor:
- Time setting: Set the current time by setting hour, minute, and AM/ PM.
- System sound volume: Select between Low, High, and Mute.
- Temperature scale: Select between °C and °F.
- Screen auto-sleep time: Select between 1min, 2min, 5min, and OFF.
- Restore to factory settings: Press OK Button to confirm resetting; “Restoring factory settings” will be shown when restoring, and you can’t press any button to control the device during this period. The monitor will auto restart when it’s done.
- Customer service contacts: Check the email, Tel. number, and address for customer service.
Add / View / Delete a Camera
- Press Menu button, select through to add a camera.
- Select through -> to view a camera.
- Select through -> to delete a camera.
  NOTE: You can switch viewing different cameras; the current camera number will be shown with the Camera icon on the monitor. You can only select one camera to view at one time.
Digital Zoom & Circulating
Press Zoom Button to zoom in to 2X / 4X when viewing the camera. A third pressing of the button will restore to the original image.
Press and hold OK Button 4 seconds to start auto circulating, press OK again to stop.
The current zoom level number will be shown with the Zoom icon 2 on the monitor
Pan-n-Tilt
When viewing the camera, press Left / Right / Up / Down Button to view at different angles, 108 degrees vertically and 270 degrees horizontally.
Volume Adjustment
Press Menu Button -> OK Button -> Left / Right Button to volume down / up, and OK Button to saving your settings.
Night Vision
The night vision is automatically activated in a dim environment. The camera has 12 high-intensity infrared LEDs for picking up clear images in the dark. Black and white images can be captured within 2m distance.
Alarm
Press Menu Button -> Right Button to locate Alarm menu -> OK Button -> Up / Down Button to select the timer setting. You can set a 2Hr, 4Hr or 6Hr alarm, or set the hour and minute otherwise. When the alarm time is reached, a beep will be heard. Press OK Button to stop; otherwise it’ll keep beeping for 30s, beeping again in 1min, stops after it’s alerted 3 times.
NOTE: When the timer is set, the Alarm icon will be shown on the monitor. · Before setting, please check that the monitor time is your current time.
Talkback
Press and hold Talk Button to talk to your baby, release it to exit the talking mode.
- When you enter the talking mode, the icon will be shown on the monitor.
- When it’s mute or the speaker volume is too low, you may not be able to hear the baby.
- When you’re pressing the Talk Button, the camera will not transfer the sound to the monitor. Please release the button to listen to your baby.
Wide-angle Viewing (Optional)
Install your wide-angle lens (separately sold) referring to the previous mounting wide-angle lens section. Now you can view the camera in a wider angle of about 170 degrees.
Temperature Alert
The monitor will prompt too high (>35°C / 95°F) and too low (<0°C / 32°F) temperatures with the “” icon, accompanied with icons and a beep alert.

Setup Guide

Setting up the Vava Baby Monitor Camera VA IH006 is straightforward and user-friendly. Here are the key steps:

Unbox the device and charge the battery for at least 3 hours before first use.
Download and install the Vava app on your smartphone or tablet.
Connect the camera to your Wi-Fi network using the app's guided setup process.
Mount the camera in the desired location or place it on a shelf.
Configure settings such as motion tracking, temperature alerts, and two-way audio through the app.
Pair additional devices if you have multiple users or cameras.

SAFETY INSTRUCTIONS

Keep cord out of the reach of children (more than 3ft / 0.9m away) in case of STRANGULATION.

NEVER place the camera or cord in or near the crib or playpen.
NEVER mount the camera directly above the crib or playpen to avoid the risk of injury.
Only use the AC adapters provided.
Never use the unit near water, including near a bathtub, sink, laundry machine tube, wet basement, etc.
Do not install near any heat sources such as radiators, heat registers, stoves, or other devices that produce heat.
Only use attachments and accessories specified by the manufacturer.
Unplug this device when unused for long periods of time.
Do not insert anything into the upgrade pinholes. This operation is only intended for professionals.

CAUTION

NOT toys. Do not allow children to play with them.
The lens and lens hood are small parts, keep them out of your baby’s reach at all times.
This product is NOT intended to replace the proper supervision of children. You MUST check your child’s activity regularly.
This product is not intended for use as a medical camera and its use should not replace adult supervision.
Unplug the product during lightning storms.
Please check the operating range and condition of the camera carefully at the initial installation, and on a regular basis after that.
Check the reception regularly. Test the camera before use and after changing the camera’s location.
For indoor use only.
Clean the camera with a dry cloth only.
Do not block any ventilation openings.
Microphone feedback might occur when the monitor is too close to the camera. Please keep them at least 1.5m / 4.9ft apart.

Vava Baby Monitor Camera VA IH006 Troubleshooting

Product not powering on?	Check that the camera and monitor are turned on. Check the camera is connected to power properly (it cannot be charged; it’s power off once disconnected from power). Check that the monitor is of enough battery (it’ll auto shut off when battery level icon flashes red slowly on the monitor). Check the intactness of the power cable.
Baby monitor can’t connect with the camera?	Check whether the camera is near the monitor (recommended to keep within 1.5-2m / 4.9-6.6ft). Check whether the monitor is of low battery. Charge it in time to restore good connection. Check whether the camera is well connected to power. Check whether there are any large metallic objects including doors, refrigerators, mirrors, etc., are placed between the camera and monitor thus blocking the radio signals. Check whether there’s any other 2.4GHz product is used nearby like WiFi routers, microwave ovens, which may interfere the connection. If nothing above is involved, please retry to pair: press the Pair Button at the bottom of the camera, press Menu button, select through and then the monitor will auto-pair with the camera.
Nothing shown when I view a camera?	Check all connections to the camera (power cable plugging and pairing). Check whether the screen is in sleep mode. Press any button to awake it. Check whether the camera is within range of the monitor. Adjust the monitor antenna to vertical position for better signal transfer.
No sound from the monitor?	Check whether the system sound volume is set to “0”. It’ll be mute if set so.
Black and white pictures?	Night vision LED may be ON. Please turn on room lights to force it out of the night mode.
Choppy videos?	Check whether the camera is near the monitor and that there’re no obstacles between them. Adjust the monitor antenna to vertical position for better signal transfer.
Too much noise?	Volume may be set too high. Press Menu Button -> OK Button -> Left Button to volume down. The camera and monitor may be put too close; keep them at least 1.5m / 4.9ft apart. The camera may be too out of range. Please keep it within 10m / 32.8ft to the monitor.

Pros & Cons

Pros

High-quality 1080p video stream with night vision
Convenient remote access through the Vava app
Motion tracking and temperature sensors for enhanced safety
Two-way audio for real-time communication
Long battery life and rechargeable battery

Cons

Potential for connectivity issues with Wi-Fi
Some users report occasional lag in video feed
No external storage option for recorded footage
App updates can sometimes cause temporary functionality issues

Customer Reviews

Customers have generally praised the Vava Baby Monitor Camera VA IH006 for its ease of use, clear video quality, and robust feature set. Many appreciate the remote access and two-way audio features, which have helped them soothe their babies from another room or even when they are away from home.

However, some users have reported occasional connectivity issues and minor lag in the video feed. Despite these minor drawbacks, the overall consensus is that this baby monitor offers excellent value and peace of mind for parents.

Most Common Complaints

Connectivity issues with Wi-Fi
Occasional lag in video feed
No external storage option for recorded footage

Vava Baby Monitor Camera VA IH006 WARRANTY

18 months warranty
Lifetime customer service (contacts on the monitor, and back cover of this User Guide)

vava Manuals

Read More