Introducing the Chicco Bravo Stroller

The Chicco Bravo Stroller is a popular choice for parents who want a stylish and versatile stroller that can grow with their child. With an estimated price range of $250 to $350, this stroller is a mid-range option that offers a range of features for both comfort and convenience. The Chicco Bravo Stroller was launched in 2015 and has since become a favorite among parents for its sleek design and easy maneuverability.

Chicco Components

Chicco Bravo Stroller Specifications

The Chicco Bravo Stroller has several key features that make it a great choice for parents:

• One-hand fold system for easy storage and transport
• Adjustable handlebar for parents of different heights
• Removable and machine-washable seat fabric
• Large canopy for shade and protection from the elements
• Front swivel wheels for easy maneuverability
• Linked parking brake for safety
• Accommodates children up to 50 pounds
• Compatible with Chicco Key Fit and Fit2 infant car seats
• Parent tray with two cup holders and storage compartment
• Child tray with cup holder and snack compartment

How to Assemble Stroller

WARNING: When opening the Stroller, ensure that your child, or other children, are at a safe distance.  Ensure that during these operations, the movable parts of the Stroller do not come into contact with your child.

If you have hardwood floors or linoleum you may want to perform this step on carpeting or lay down some protection for your floors.

1. Stand the Stroller Frame (A) on end and unfold the frame as shown. 

   

   
   Press down on the seat to make sure that the  frame is locked.

   

2. Remove and discard red plastic end caps on the Rear Axle (D).  Attach the Rear Axle to the Stroller Frame as shown.  The Rear Axle is attached when the snap buttons click into the holes on the Rear Axle mount. 

   

3. On one side of the Rear Axle, slide a Rear Wheel (C), and turn the Wheel until the brake tab fits into one of the grooves on the Wheel.  
   On the same side slide a Washer (E) onto the Rear Axle. 

   

   Secure the Wheel to the Rear Axle using the Pin (F).  Push the straight side of the Pin through the hole on the Rear Axle.  The curve on the Pin must curve around the outside of the Rear Axle, as shown.  Make sure Washer is between the Pin and Wheel.

   

   WARNING: Check that the wheels are fitted correctly.  
   Line up the tabs on the Hubcaps (G) with the holes on the Wheel. Snap the Hubcap onto the Wheel to cover the Washer and Pin.  Repeat Step 3 for other side.

   

4. Attach the Front Wheel (B) to the Stroller Frame by lining up and inserting the Front Wheel Pin into the corresponding opening on the Stroller Front Leg, as shown.  Repeat for the other side.  To check that the Wheels are securely attached pull down on the Wheel assemblies.

   

   How to Adjust the Handle

5. Rotate the Parent Handle up from the closed position until it locks into 1st position.  The Parent Handle height can be adjusted to 3 positions, as shown.

   

   Push in on both side Buttons to release the Parent Handle.  Then rotate the Parent Handle up or down to the desired position. 
   How to Recline the Seat

6. To Recline the Backrest, squeeze together both levers and pull down on the Backrest.  To adjust the Backrest into an upright position, push up on the Backrest until it locks into the desired position. 

   

   How to Use the Canopy

7. Pull the front edge of the Canopy forward to open the Canopy. Reverse this step to close the Canopy.

   

   How to Use the Brakes
   WARNING: Always apply the brakes whenever the stroller is stationary.  Never leave the stroller on a sloped surface, with a child onboard, even with the brakes applied.

8. Push down on a Brake Lock Levers located on each side of the Rear Wheel assembly, to lock the Rear Wheels.  
   Pull up on the Brake Lock Levers to unlock the Rear Wheels.  

   

   How to Use 5-point Safety Harness
   WARNING: This stroller features three harness positions.  Always use a harness position located ABOVE the child's shoulder line.  If multiple harness positions are above the child's shoulder line, use the one closest to it.

9. It is recommended that a child under 6 months old ride in the Key Fit or Key Fit 30 infant car seat as part of the travel system. The Shoulder Straps can be adjusted to 3 height positions as shown. To adjust the Shoulder Harness slide the strap through loop.  Always use the same loop position for both straps (9B). 

   

10. This stroller has a 5-point safety harness.

    

    Make sure the Shoulder Strap Connector is in the correct position, as shown.  Slide the Shoulder Strap Connector onto the Waist Strap Clip and repeat for the other side.  Then slide both Waist Clips into the Crotch Strap Buckle, as shown.  Pull on both sides to make sure the Clips are secured to the Buckle.  
    WARNING: Never leave child unattended. Avoid serious injury from falling or sliding out.  Always use seat belt.

11. The Safety Harness can be released by pressing the button on the center of the Buckle and pulling both Waist Clips out.
    Pull up on the Shoulder Strap Connector to remove it from the Waist Strap Clip. 

    

12. The length of the Shoulder Straps can be adjusted by pulling on the adjustment buckles to tighten or loosen.
    The length of the waist straps can be adjusted.  Press the tab at the end of the Waist Strap Clip and pull on the strap to tighten or loosen, to better fit your child.

    

    How to Use the Child's Tray

13. Insert the Child's Tray (H) Tongues into the corresponding openings on the Stroller Frame.  To release the Child's Tray, press in on the buttons located at the sides of the Child's Tray, as shown (13B). 

    

    Using the Key Fit Infant Seat
    WARNING: ONLY USE a Chicco Key Fit infant car seat with this product.  Make sure to properly install the Child's Tray prior to using the Key Fit.  Always make sure child is properly harnessed in the car seat.  Only use this product to transport infants that are within the size and weight limitations of the infant car seat. 

14. With the Child's Tray attached and the Stroller Backrest FULLY RECLINED, place the Key Fit infant carrier into the Stroller Frame.  The carrier will only fit into the frame  "REAR FACING ONLY".  The baby will be facing you when pushing the stroller.  Make sure infant carrier clicks into the stroller frame on both sides.

    

    
    Note:  Pull up on the infant carrier; make sure it is secured to stroller frame (14B).  If using the Canopy with the Key Fit, rotate the handle down, to allow the Canopy to fully extend open.

15. Squeeze the Release Handle on the back of the infant carrier and lift up on the carrying handle, to remove the Key Fit Infant Seat.

    

    How to Remove Front Wheels

16. Remove the Front Wheels by pushing in on the Release Button, just above the wheel (as shown).  And, at the same time, pull the Front Wheel off of the Stroller Frame.  Repeat for the other side.

    

    
    How to Close the Stroller
    WARNING: When folding the Stroller, make sure that your child and other children are at a safe distance.  Ensure that during the operations, the movable parts of the Stroller do not come in contact with your child.  

17. Remove the Key Fit and the Child's Tray. Lift up the Seat Fabric and locate the Fold Handle, as shown. Slide the Handle Release button over and lift up on the Handle.

    

18. Pull up on the Fold Handle, the Stroller Legs and Seat back will fold down to make the Stroller compact.

    

    How to Remove the Seat

19. Pull the Canopy Zipper up and around the outside of the Canopy, as shown.  Then, pull out on the Canopy Clips to remove the Canopy from both sides of the Stroller Frame. 

    

    
    Note:  It is not required for the Canopy to be removed in Carrier Mode.

20. Locate the Fabric Clips on both sides below the Parent Tray (as shown).  Press down on the Fabric Clip release button, and at the same time pull out the Fabric Clip from Stroller Frame.  Repeat for the other side.

    

    
    The fabric will still be attached to the Parent Tray, as shown.  Lift up and remove the Flexible Tab from the groove on the Parent Tray.  Fold the Flexible Tab and Fabric Clips forward.

    

21. Lift up the Footrest Fabric on the front of the stroller to locate two sets of straps.  Both Straps have a Buckle under the Seat Pan.  Reach under the Seat Pan and undo both Buckles.

    

22. Locate two Release Buttons at the back of the Seat.  Press both Buttons together and at the same time tilt up. Remove the back section of the Seat Pan. 

    

    

    How to Use Car Seat Carrier Mode

23. To use the Stroller as a Car Seat Carrier without the Stroller Seat attached.  Follow Steps 13 thru 15 to attach the Key Fit infant carrier to the Stroller Frame.

    

    How to Attach the Seat

24. Tilt the Seat Bracket to line up the tabs with the corresponding openings on the Seat Pan.  
    Slide the tabs into the openings, to reattach the Stroller Seat .

    

    How to Attach the Seat
    Press down on the back edge of the Seat Bracket until it clicks into place.  Making sure both sides lock into the Stroller Frame.  Then repeat steps 19-21 in reverse.

    

Chicco Detailed Description

The Chicco Bravo Stroller is designed for parents who want a stroller that is both fashionable and functional. With its sleek black frame and bold red accents, this stroller is sure to turn heads wherever you go. The stroller is easy to maneuver, with front swivel wheels that make it a breeze to navigate through crowded streets or tight spaces. The one-hand fold system allows for easy storage, while the adjustable handlebar ensures that parents of different heights can push the stroller comfortably.

The Chicco Bravo Stroller is also designed with convenience in mind, with a parent tray that includes two cup holders and a storage compartment for your phone, keys, or other essentials. The child tray features a cup holder and a snack compartment, so your little one can enjoy a snack on the go. The removable and machine-washable seat fabric makes cleanup a breeze, while the large canopy provides shade and protection from the elements.

Cleaning and Maintenance 

Chicco Bravo Stroller product requires regular maintenance.  The cleaning and maintenance of the stroller must only be carried out by an adult.

CLEANING

Please refer to the care label for instructions on cleaning the fabric parts of the stroller.   Periodically wipe clean plastic parts with a soft damp cloth.  Always dry the metal parts to prevent the formation of rust if the stroller has come into contact with water.

MAINTENANCE

Lubricate the moving parts only if necessary, with a light application of a silicone based lubricant. Periodically check the condition of the wheels, and keep them clean of dust and sand.  To avoid friction that may prevent the correct operation of the stroller, ensure that all the movable plastic parts placed along the metal frame are clean of dust, dirt or sand.  Keep the stroller in a dry place.  Prolonged exposure to direct sunlight may cause the fabric to fade.  

Pros & Cons

Pros

• Sleek and stylish design
• Easy to maneuver and store
• Compatible with Chicco infant car seats
• Adjustable handlebar and parent tray for convenience
• Large canopy for protection from the elements

Cons

• May be too heavy for some users
• Basket is relatively small
• Canopy may not provide enough coverage for taller children
• May be difficult to assemble for some users

Customer Reviews about Chicco Bravo Stroller

The Chicco Bravo Stroller has received mixed reviews from customers, with some praising its style and convenience, while others have criticized its weight and small basket. The stroller has been reviewed over 7,000 times on Amazon, with an average rating of 4.5 out of 5 stars.

Some of the most common complaints about the Chicco Bravo Stroller include its heavy weight and small basket, which some users have found difficult to access. However, many users have praised the stroller's easy maneuverability, stylish design, and compatibility with Chicco infant car seats.