Setup: Dyson Handheld Vacuum Cleaner DC-34 User Manual

Content

Overview

The Handheld Vacuum Cleaner DC-34 is a compact cordless vacuum designed for quick cleaning indoors and in stationary vehicles. Its lightweight handheld design is suitable for crumbs, dust, upholstery, stairs, and other small cleaning tasks where a full-size vacuum is inconvenient.

The unit uses a rechargeable battery, a clear debris bin, a washable filter, and interchangeable cleaning accessories. Two suction settings help balance cleaning power and battery use. Keep the vacuum upright during operation to reduce the chance of debris escaping from the bin.

Specifications

Model: DC-34 handheld vacuum cleaner
Net weight: 1.32 kg
Power source: Rechargeable battery
Maximum suction mode: Boost mode
Standard suction mode: High Constant Suction
Filter type: Removable, washable filter
Dust container: Clear bin with MAX fill marker
Intended use: Domestic indoor cleaning and stationary car cleaning

Detailed Description

The DC-34 separates dirt from the airflow before collecting it in the clear bin. The bin allows you to monitor the amount of debris and identify when emptying is required. Do not operate the vacuum without both the clear bin and filter correctly installed.

The main body contains the motor, rechargeable battery, filter assembly, clear bin, and control switches. A battery release button is provided for battery removal, but it should not be pressed during normal use. The serial number and rating information are located behind the filter on the main body.

Included cleaning components may include a combination accessory tool and a mini motorised brush bar. The combination tool is useful for general surfaces and narrow areas, while the motorised brush bar helps agitate debris on upholstery and similar surfaces. Always switch the vacuum off before attaching or removing a motorised brush bar.

Safety

Read all instructions and warning labels before charging or operating the vacuum.
Keep children supervised and do not allow the appliance or charger to be used as a toy.
Use the vacuum indoors or in a stationary vehicle only. Do not use it outdoors, in bathrooms, near pools, or on wet surfaces.
Never use the DC-34 to collect water, liquids, flammable fluids, hot ash, cigarettes, matches, or other burning material.
Keep hair, fingers, loose clothing, and other body parts away from openings and moving brush components.
Do not use the appliance if it, the battery, charger, or cable has been dropped, damaged, exposed to water, or is not operating normally.
Use only the charger, battery, accessories, and replacement parts specified for this model.
Do not insert objects into openings or operate the vacuum with an airflow path blocked.
Take extra care when cleaning stairs and keep the appliance securely controlled.
Do not handle the charger, charging terminals, or vacuum with wet hands.
Disconnect the charger before cleaning, maintenance, or removing the battery.
Do not disassemble the vacuum or attempt repairs beyond the procedures described in this guide.
Do not burn, crush, short-circuit, or heat the battery above 60°C.
Keep the appliance away from naked flames and other heat sources.

Setup and Operation

Assembly

Align the selected accessory with the vacuum inlet and push it into position until it clicks. Check that the attachment is secure before starting. To remove a motorised brush bar, switch the vacuum off first and disconnect it from the charger.

Charging

Connect the supplied charger to the vacuum and then connect the charger to a suitable electrical socket.
Allow the battery to charge until the indicator shows that it is fully charged.
Disconnect the charger before using the vacuum.

The indicator can show charging, fully charged, not charging, or a temperature-related charging interruption. If charging stops because the battery is too cold or too hot, move the vacuum to room temperature and allow it to stabilise before trying again.

Cleaning Modes

Press and hold the appropriate control to operate the vacuum. High Constant Suction provides the regular cleaning setting and is suitable for routine debris. Boost mode provides higher suction for more demanding dirt but uses the battery more quickly.

Do not press the silver battery release button while vacuuming. Keep the appliance upright and avoid pressing the nozzle forcefully against a surface. Before cleaning polished wood or lino, inspect the accessory underside and bristles for grit or other objects that could cause marks.

Using the Brush Bar

Use the mini motorised brush bar for suitable upholstery and fabric surfaces. Keep fingers, hair, and loose clothing away from the rotating bar. If the brush bar stops because debris has wrapped around it, turn the vacuum off, disconnect the charger, and clear the obstruction before reuse.

Cleaning and Maintenance

Emptying the Clear Bin

Switch off the vacuum and disconnect it from the charger.
Empty the bin when debris reaches the MAX mark. Do not allow the container to become overfilled.
Hold the bin over a waste container and press the red release button to open it.
For reduced dust exposure, place the bin inside a plastic bag before releasing the debris, then close and dispose of the bag.

Do not use the vacuum without the clear bin fitted securely.

Cleaning the Clear Bin

Open the bin using the release button.
Press the lower release control to separate the clear bin from the main body.
Rinse the bin with cold water only.
Wipe the shroud with a cloth or dry brush to remove lint and accumulated dirt.
Allow every part to dry completely before reassembly.

Do not use detergents, polish, or air fresheners, and do not place the clear bin in a dishwasher.

Washing the Filter

Wash the filter with cold water at least once each month. More frequent washing may be needed after collecting fine dust or when the vacuum is used mainly in High Constant Suction mode.

Switch off the vacuum and disconnect it from the charger.
Remove the filter from its position behind the filter cover.
Rinse it with cold water until the water runs clear.
Leave the filter to dry completely for at least 12 hours.
Refit the dry filter before operating the vacuum.

Never clean the filter with detergent or place it in a dishwasher, washing machine, tumble dryer, oven, microwave, or near an open flame.

Storage and Battery Care

Store the handheld vacuum indoors and do not use or store it below 3°C. If the battery has fully discharged, allow it to cool for several minutes before recharging. Avoid operating the vacuum with the battery pressed directly against a surface, as airflow around the battery helps it run cooler.

Troubleshooting

Vacuum Stops During Use

The thermal protection system may shut the motor off if airflow is restricted or the motor becomes too hot. Switch off the appliance, disconnect the charger, and allow it to cool for at least one hour. Check the inlet, bin, filter, accessories, and brush bar for blockages before restarting.

Reduced Suction

Empty the clear bin if debris has reached the MAX line.
Check that the clear bin and filter are fitted correctly.
Wash the filter with cold water and allow it to dry for at least 12 hours.
Inspect the nozzle, accessory, and airflow path for accumulated debris.

Brush Bar Has Stopped

Switch off and disconnect the vacuum from the charger. Use a coin to unlock the brush-bar fastener marked with a padlock, remove the brush bar, and clear wrapped hair or other debris. Reinstall the bar and lock the fastener before use. Be careful of sharp objects while clearing obstructions.

Charger Indicator Shows a Fault

If the charger indicates that the battery is not charging, check that the battery is installed correctly and that the charger is connected securely. A temperature indicator means the battery is too cold or too hot for charging. Allow the appliance to reach room temperature before trying again.

Battery Runs Down Quickly

Boost mode consumes power faster than High Constant Suction. A dirty filter, blocked airflow path, overfilled bin, or ageing battery can also reduce operating time. Clean the filter, empty the bin, and remove blockages before assessing battery performance.

Warranty

The DC-34 manual describes a limited two-year guarantee covering repair or replacement when a fault results from defective materials, workmanship, or function during the guarantee period. Coverage applies to use in the country of purchase and requires proof of purchase or delivery.

The guarantee does not generally cover normal wear, reduced battery duration caused by age or use, accidental damage, misuse, neglect, blockages, non-domestic use, incorrect installation, non-genuine parts, or repairs and alterations performed by unauthorised parties. Repairs or replacements under the guarantee do not extend the original guarantee period.

Disposal

The vacuum contains recyclable materials. Dispose of the product responsibly according to local requirements. The battery should be removed before disposal and recycled or discarded in accordance with applicable regulations. Do not incinerate the appliance or battery.

Pros & Cons

Pros

Lightweight cordless format for quick indoor and stationary car cleaning.
Clear bin makes the fill level easy to monitor.
Two suction settings support routine and intensive cleaning.
Washable filter helps maintain airflow when serviced regularly.
Motorised brush bar supports cleaning of suitable fabric surfaces.

Cons

Boost mode uses battery power more quickly.
The filter requires regular washing and a full drying period before reuse.
The appliance must not be used for liquids, wet debris, or outdoor cleaning.
Blockages can trigger automatic thermal shut-off and require cooling before troubleshooting.

PDF

Faqs

How should I assemble the Handheld Vacuum Cleaner DC-34 before using it?

Attach the selected accessory to the vacuum inlet until it clicks securely into place. Check that the clear bin and filter are installed before switching on, because the cleaner should not be operated without either part. If you are fitting or removing the motorised brush bar, turn the vacuum off first. Keep the cleaner upright during use so dirt does not spill from the bin.

How do I charge the Handheld Vacuum Cleaner DC-34 safely?

Use only the supplied or approved charger and connect it to a suitable indoor power socket. Keep the charger cable away from heat, walkways, and strain, and unplug it by holding the charger rather than pulling the cable. Do not charge the vacuum outdoors, near water, or with wet hands. Charging indicators show whether the battery is charging, full, too hot, too cold, or needs checking.

Why does my DC-34 stop working or show reduced suction?

A blocked airway, dirty filter, obstructed brush bar, or overheated motor can reduce suction or make the Handheld Vacuum Cleaner DC-34 shut off automatically. Turn it off, disconnect the charger, and allow the machine to cool for at least an hour if the motor is hot. Check the nozzle, attachments, bin, filter, and brush bar for obstructions, then refit every part securely before restarting.

How often should I wash the DC-34 vacuum filter?

Wash the DC-34 filter with cold water at least once a month, or more frequently when vacuuming fine dust or using high constant suction often. Switch off the vacuum and disconnect it from the charger before removing the filter. Do not use detergent or place the filter in an appliance. Leave it to air-dry completely for at least 12 hours before reinstalling it.

How do I empty and clean the clear bin on the DC-34?

Switch off the vacuum and disconnect it from the charger before emptying the clear bin. Release the dirt when it reaches the MAX line rather than allowing the bin to overfill. To reduce dust exposure, place the bin inside a tightly sealed bag while emptying. If washing is needed, use cold water only and reinstall the bin only after it is completely dry. Do not use a dishwasher, detergent, polish, or air freshener.

What is the correct way to clear a blockage from the DC-34?

Turn off the Handheld Vacuum Cleaner DC-34 and unplug it from the charger before checking for blockages. Inspect the nozzle, wand or accessory opening, air passages, and bin area, taking care around sharp debris. Do not operate the vacuum while investigating a blockage. Clear the obstruction, allow the cleaner to cool if it stopped from overheating, and ensure all removed components are firmly secured before use.

How can I clear an obstruction from the DC-34 motorised brush bar?

Switch off the DC-34 and disconnect it from the charger before working on the motorised brush bar. If the brush bar has stopped because hair or debris is wrapped around it, unlock its fastener with a coin and remove the bar as instructed by the assembly design. Clear the obstruction carefully, watching for sharp objects, then replace the brush bar and lock the fastener before reconnecting or operating the cleaner.

What safety precautions should I follow when using the DC-34?

Use the Handheld Vacuum Cleaner DC-34 indoors or in a stationary car only, and never on wet surfaces or to collect water, liquids, hot ash, burning objects, or flammable substances. Keep fingers, hair, and loose clothing away from moving parts. Avoid sharp hard objects and large amounts of fine powder. Do not use the cleaner below 3°C, near open flames, or with damaged cables or components.