Setup: Electrohome EB10 Powered Bookshelf Speakers User Manual

Overview

The EB10 Powered Bookshelf Speakers are a compact 2.0 stereo speaker system designed for everyday listening with turntables, computers, TVs, smartphones, and other common audio sources. They combine an active speaker with a passive speaker, so the main unit handles amplification, source selection, and volume control while the second speaker connects by wire.

EB10 Powered Bookshelf Speakers are a strong fit for small rooms, desks, shelves, and media setups where simple plug-and-play sound is more useful than a complicated receiver-based system. They also suit listeners who want Bluetooth streaming plus wired input options in one compact pair.

Specifications

• Model: EB10
• System type: Powered bookshelf speaker pair with one active speaker and one passive speaker
• Amplifier output: Class D, 20 watts continuous average output, 2 x 10 watts RMS
• Driver size: 3-inch woofer
• Frequency response: 100Hz to 16KHz, +/-5dB
• Inputs: RCA L/R, 3.5mm AUX, Bluetooth
• Power: AC 120V~60Hz
• Included speaker wire: 8 ft.
• Cabinet size: 6.14 x 4.61 x 5.31 in. each

Detailed Description

The EB10 Powered Bookshelf Speakers use a single active cabinet to control the system. The active speaker includes the control knob, power input, Bluetooth pairing reset button, LED indicator, AUX input, RCA input, and speaker wire output. The passive speaker connects to the active unit through the supplied wire and produces sound as part of the stereo pair.

The control knob is the main operating control. A press changes the audio source, a hold turns the speakers on or off, and turning the knob adjusts volume. The LED indicator gives clear source feedback so you can tell what the speakers are doing at a glance.

These speakers are built for flexible home audio use. Bluetooth supports wireless playback, while the RCA and AUX inputs make it easy to connect traditional and portable devices. That makes EB10 Powered Bookshelf Speakers practical for music, podcasts, video playback, and turntable listening.

Safety

• Place the active speaker on the right and the passive speaker on the left for correct setup.
• Keep the front of the speakers near the front edge of a shelf or cabinet for better sound performance.
• Make sure the speaker wire is connected with matching colors on both speakers: red to red and black to black.
• Use a phono preamp when connecting a turntable, especially if the turntable does not already have one built in.
• Do not rely on the included 8 ft. speaker wire if the speakers need to sit farther apart; use suitable 22-gauge speaker wire for longer runs.
• Follow the required power connection and use a known good outlet.

Setup and Operation

First-time setup

• Position the active speaker on the right and the passive speaker on the left.
• Connect the included speaker wire between the spring clips on the back of both speakers.
• Match the wire colors correctly on both ends so red connects to red and black connects to black.
• Connect the power cable to the active speaker and plug it into a power outlet.

Break-in period

The speaker cones use a butyl rubber surround that benefits from a short break-in period. For best performance, play audio at moderate volume for about 10 to 12 hours so the surround loosens and the cone can move more freely.

Power and source control

• Press the control knob to turn the speakers on.
• Hold the control knob to turn the speakers off.
• Press the control knob to cycle through sources.
• Blue LED indicates Bluetooth mode.
• Green LED indicates RCA input.
• Yellow LED indicates AUX input.
• Red LED indicates standby.

Bluetooth pairing

• Select Bluetooth mode with the control knob.
• Find and pair with “Electrohome EB10” on your source device.
• The system will try to reconnect automatically to the last paired device.
• Bluetooth range is up to 33 ft. in clear line of sight, with obstacles reducing distance.
• If pairing fails, hold the Bluetooth pairing reset button on the back of the active speaker and try again.

RCA input

• Connect an RCA cable from your source device to the RCA input on the active speaker.
• Select RCA mode with the control knob until the green LED appears.
• Adjust volume on both the EB10 and the source device as needed.
• Use a phono preamp with a turntable if required.

AUX input

• Connect an AUX cable from your device to the AUX input on the active speaker.
• Select AUX mode with the control knob until the yellow LED appears.
• Adjust volume on both the speakers and the connected device.

Troubleshooting

• If there is no power, check that the power cord is fully inserted and plugged into a working outlet.
• If there is no audio, confirm the volume is turned up on both the EB10 and the source device.
• If no sound comes from the passive speaker, inspect the speaker wire connection and make sure the metal wire contacts the spring clips properly.
• If sound is weak, verify that EQ settings are flat and volume normalization is turned off on the source device or app.
• If a turntable sounds too quiet, check whether a phono preamp is enabled or added.
• If audio quality is poor, recheck wire polarity, test another source device, and adjust speaker placement away from or closer to the wall depending on bass level.
• If another Bluetooth device is connected, use the pairing reset button before connecting a different device.

Warranty

The EB10 Powered Bookshelf Speakers include a one-year parts and labor warranty for the original owner. If a covered defect cannot be repaired, the unit may be replaced, and any replacement keeps the remainder of the original warranty period from the original purchase date.

The warranty excludes damage caused by misuse, accidents, improper installation, unauthorized repair, cosmetic wear, environmental damage, missing model or serial information, commercial or rental use, incorrect voltage, and consumable parts such as batteries or belts.

Pros & Cons

• Pros: Simple all-in-one powered design, Bluetooth plus RCA and AUX inputs, clear source indicators, compact footprint, and easy setup.
• Pros: Useful for turntables, desktop audio, and small-room listening without a separate amplifier.
• Cons: The passive speaker requires a wired connection, Bluetooth range is modest in real-world use, and turntable users may need a separate preamp.
• Cons: The included speaker wire is only 8 ft., so wider placements may require replacement cable.