Usage & Setup: Electrohome Huntley Powered Bookshelf Speakers EB10 Setup Guide

Content

Overview

The Huntley Powered Bookshelf Speakers EB10 are compact powered stereo speakers designed for home listening with Bluetooth, RCA, and AUX connectivity. They suit turntables, computers, smartphones, TVs, and other everyday audio sources, making them a flexible choice for small rooms, desks, and bookshelf setups.

This model uses an active speaker and a passive speaker, so only the active unit connects to power. The setup is built for simple use while still offering the convenience of multiple inputs and easy source switching.

Specifications

Model: EB10
Speaker type: Powered bookshelf speakers, 2-piece stereo set
Driver size: 3-inch woofer
Power output: 20 watts continuous average output, 2 x 10 watts RMS
Frequency response: 100 Hz to 16 kHz, +/-5 dB
Connectivity: Bluetooth, RCA L/R, 3.5 mm AUX in
Power input: 120V AC, 60Hz
Dimensions: 6.14 x 4.61 x 5.31 inches
Included speaker wire length: 8 ft.
Power design: Built-in Class D amplifier in the active speaker

Detailed Description

The Huntley Powered Bookshelf Speakers EB10 pair a right-side active speaker with a left-side passive speaker. The active speaker contains the amplifier, input connections, power input, LED indicator, pairing reset button, and the control knob. The passive speaker connects to the active unit through speaker wire.

The front of each speaker uses a 3-inch woofer for compact stereo playback. On the back, the control layout keeps operation simple: press the knob to change sources, hold it to power the system on or off, and turn it to raise or lower volume. The LED indicator changes color to show which input is active or whether the unit is in standby.

The EB10 is built for mixed-use listening, so one set of speakers can handle wireless streaming, wired music playback, or audio from gear such as a turntable, computer, or TV. For turntable use, an external or built-in phono preamp is required.

Safety

Use the speakers in a dry, well-ventilated location and keep them away from water, moisture, and dripping or splashing liquids. Do not block ventilation openings, place the unit near heat sources, or overload wall outlets. The power cord should be protected from pinching or damage, and the speakers should only be used with approved accessories and support surfaces.

Unplug the system during long periods of nonuse or during lightning storms. If the product is damaged, exposed to moisture, drops liquid, or stops working properly, service should be handled by qualified personnel. The unit uses double insulation and should not be opened by the user.

Setup and Operation

First-Time Setup

Place the active speaker on the right and the passive speaker on the left.
If the speakers sit on a shelf or in a cabinet, position the front edges close to the shelf edge for better sound.
Connect the included speaker wire between the spring clips on the back of both speakers, matching red to red and black to black.
Connect the power cable to the active speaker and plug it into a wall outlet.

Using the Controls

Press the control knob to turn the unit on.
Hold the control knob to turn it off.
Turn the control knob to adjust volume.
Press the control knob to cycle through inputs.

LED Indicator Meanings

Flashing blue: Bluetooth pairing mode
Solid blue: Bluetooth connected
Solid yellow: AUX source selected
Solid green: RCA source selected
Solid red: Standby

Bluetooth Pairing

Select Bluetooth mode using the control knob, then pair your phone, tablet, or computer with the device name Electrohome EB10. The speaker usually reconnects automatically to the last paired device when it comes back within range. Wireless range is listed as up to 33 ft. in clear line of sight, though walls and other obstacles can reduce that distance.

If the speaker cannot find a device or needs to forget a prior connection, use the Bluetooth pairing reset button on the back of the active speaker.

RCA Input

Connect an RCA cable from your audio source to the back of the active speaker, then press the control knob to select the RCA input. This mode is shown by the green LED. Adjust volume on both the EB10 and the source device for best results.

AUX Input

Connect a 3.5 mm AUX cable from your source device to the active speaker, select AUX with the control knob, and adjust volume from both devices as needed. The yellow LED indicates AUX mode.

Troubleshooting

If the passive speaker has no sound, check that the speaker wire is firmly attached at both ends and that the bare wire is making contact with the spring clips.
If the speakers seem quiet, set EQ to flat on the source device or app and disable volume normalization. Low turntable output usually means a phono preamp is missing or turned off.
If Bluetooth will not connect, press the pairing reset button on the active speaker and try pairing again.
If the wrong source is playing, press the control knob until the LED color matches the input you want.

Warranty

The Huntley Powered Bookshelf Speakers EB10 include a one-year parts and labor warranty for the original owner. Electrohome covers defects in materials and workmanship during the warranty period and may repair or replace the product if needed.

The warranty does not cover abuse, improper installation, accidental damage, unauthorized modification or repair, cosmetic wear, environmental damage, liquid damage, incorrect voltage use, commercial or rental use, or missing model and serial information. Return shipping for warranty service is the customer’s responsibility, and the product must be returned in its original packaging.

Pros & Cons

Pros: Compact powered bookshelf design with Bluetooth, RCA, and AUX support.
Pros: Simple one-knob control layout with clear LED source indicators.
Pros: Active and passive speaker system saves space while keeping stereo separation.
Cons: The included speaker wire is only 8 ft., so longer setups may need replacement cable.
Cons: Turntable users must provide a phono preamp when one is not built in.

PDF

Faqs

How should I place and wire the Huntley Powered Bookshelf Speakers EB10 for the best first-time setup?

Place the active speaker on the right and the passive speaker on the left for correct operation. If the speakers sit on a shelf or in a cabinet, keep the front edges as close to the shelf edge as possible to help the sound project cleanly. Connect the included speaker wire between the spring clips on both speakers, matching red to red and black to black. Then plug the power cord into the active speaker and a wall outlet.

Why is the passive speaker on my EB10 system silent, and how can I fix it?

If the left passive speaker has no audio, the most common cause is a loose or incomplete speaker-wire connection. Check both ends of the wire and make sure the bare metal is firmly touching the spring clips. If the insulation is covering too much wire, strip a little more to expose copper. Also confirm that the wire polarity matches on both speakers, with red connected to red and black to black.

How do I switch inputs on the Huntley EB10 between Bluetooth, RCA, and AUX?

Use the control knob on the back of the active speaker to change sources. A press cycles through the inputs, and the LED color shows which one is selected: blue for Bluetooth, green for RCA, and yellow for AUX. This makes it easy to move between wireless playback and wired devices without changing cables. Always confirm the correct source is selected before assuming there is a sound problem.

How do I pair a phone or computer to the EB10 Bluetooth speakers?

Press the control knob until the LED flashes blue, which puts the EB10 into Bluetooth pairing mode. On your phone or computer, search for available devices and select “Electrohome EB10.” Once paired, the LED turns solid blue. The speakers can also auto-pair to the last connected device when it returns to range or Bluetooth is turned back on, which makes reconnecting faster.

What should I do if my device cannot find the EB10 in Bluetooth pairing mode?

If the EB10 does not appear in your Bluetooth list, use the pairing reset button on the back of the active speaker. Holding this button clears the current Bluetooth connection and helps the speakers enter a fresh pairing state. After resetting, try pairing again from your phone, tablet, or computer. If another device was connected before, disconnecting it first may also help the new device appear.

Why does my turntable sound very quiet on the EB10 powered bookshelf speakers?

A turntable usually needs a phono preamp before it connects properly to the EB10 through RCA. Some turntables include a built-in preamp, while others need an external one. If the volume is extremely low, check whether the turntable is set to line output or whether a preamp has been enabled. Also raise the volume on both the EB10 and the source device for a balanced listening level.

Why are my EB10 speakers quieter than expected, and how can I improve the sound?

Low volume can come from source-device settings as much as from the speakers themselves. Check that EQ settings are flat and that volume normalization is turned off in your music app or device settings. Make sure the EB10 volume is also raised. If you are using a turntable, confirm that a preamp is active. In some cases, the speaker wire or input selection is also part of the problem.

Do the Huntley EB10 speakers need a break-in period before they reach their best sound?

Yes, the EB10 speakers benefit from a break-in period. The guide recommends about 10 to 12 hours of play at moderate volume so the rubber surround can loosen and the cone can move more freely. This can help the speakers sound more open and balanced over time. During break-in, avoid pushing the volume too hard and let the speakers play normally to settle in gradually.