Eureka Air Purifier NEA129 User Guide | Operating Instructions

cover-image

Content

Eureka Air Purifier NEA129

Introducing the Eureka Air Purifier NEA129 is designed to efficiently clean the air in your home, removing allergens, dust, and other pollutants. With its compact size and powerful filtration system, this air purifier is a practical choice for creating a healthier indoor environment.

Product Parts

product_parts_eureka_air_purifier_nea120-nea129.png

Replacement Parts

peplacement_parts_eureka_air_purifier_nea120-nea129.png

Technical Parameters

  1. The performance parameters in the table are measured before delivery and are for reference only.
  2. Due to product improvement, the following parameters may be changed and shall refer to the product nameplate parameters.
  3. The applicable area is according to the theoretical value calculated by 1.55 x CADR particulate matter; with the use of different environments or outdoor pollution and other factors, the applicable area will also change.
  4. Purifying principle: The air purifier blows air into the machine and filters the air through the built-in filter core. It can mainly play the role of filtering dust (such as PM2.5), formaldehyde, odor, sterilization, and others.
ModelNEA120-NEA129
AHAM verified CADR (CFM)Smoke 143, Dust 145, Pollen 228
Rated voltage (V~)120
Rated frequency (Hz)60
Rated power (W)58
Noise [dB(A)]32-52

*AHAM Report Number: 180411011GZU-001

Detailed Description

User ease is a priority in the design of the Eureka Air Purifier NEA129. Its touch screen display makes it simple to change the fan speed, timing, and filter replacement indicator, among other settings. You can also conveniently operate this air purifier from across the room thanks to its remote control. At its highest setting, the NEA120-NEA129 consumes just 45 watts of power, making it an energy-efficient device. Its integrated handle also makes moving it from room to room simple.

Installation

  1. Take off the back cover.
  2. Remove the filter and the protective covering on the filter.

    installation_eureka_air_purifier_nea120-nea129.png
  3. Inset the filter into the unit and consult the filter for correct installation direction.
  4. Reattach the back cover of the unit.

    installation-eureka_air_purifier_nea120-nea129.png

Operating Instructions

operating_instructions_eureka_air_purifier_nea120-nea129.png
  1. purification_volume_button.png Purification volume button
    Press the speed button to select different cleaning levels
  2. on-off_button.png On/off button
    Press the Power On / Off button to activate your air purifier
    This product will default to the last working gear each time you turn on the machine.
  3. uv_button.png UV button
    To activate the UV function press the UV button 
    The UV lamp can be visually displayed by blue light when it is working 
    The blue light on the UV button will flash continuously indicating  that it is time to replace the filter.
    After the filter replacement is completed, push and hold the UV button for 3 seconds to reset filter change indicator.

Setup Guide

Setting up the Eureka Air Purifier NEA129 is easy. 

  • Simply unbox the unit, remove the plastic from the filter, and plug it in. 
  • Use the touch screen display or remote control to turn it on and adjust the settings to your liking. 
  • The filter replacement indicator will let you know when it's time to replace the filter, which is typically every 6 to 8 months, depending on usage.

Filter cleaning and replacement

Cleaning:  

  • It is recommended to clean the filter twice a week with soft brush or household vacuum cleaner.
  • Do not use water to wash the filter.

Filter replacement:

  • Reference to Installation
  • After the filter replacement is completed, push and hold the UV button for 3 seconds to reset filter change indicator.

Filter life time

filter_life_time_eureka_air_purifier_nea120-nea129.png

Filter life depends on many factors. Our recommended replacement timing is a guide only and can be longer or shorter depending upon your environment.

WARNING: RISK OF ELECTRIC SHOCK
These servicing instructions are for use by qualified personnel only. To reduce the risk of electric shock, do not perform any servicing other than that contained in the operating instructions unless you are qualified to do so! 

Correct placement 
In order to achieve better cleaning effect and avoid the influence of metal shielding effect on communication, please ensure that the air purifier is more than 12 inch away from the wall and other obstructions when using it, and maintain a distance of more than 20 inch from the metal/appliance. 

correct_placement_eureka_air_purifier_nea120-nea129.png

Troubleshooting

Before you ask for maintenance, please check according to the table below.

Problems encounteredReasonsSolutions
Purifier cannot run- It is possible that the power cord is not plugged or poor contact with power cord- Please connect power and make good contact
 - May not turn on the power switch- Please turn on the power switch
 - It is possible that the filter is not installed in place and safety switch is not triggered- Please properly install the filter and buckle the back cover (reference to page 4)
The effect is bad to eliminate smoke and odor- It is possible that the filter assembly is not installed well- Please properly install the filter assembly
 - It is possible that the filter assembly has reached the end of life- Please replace the new filter assembly
 - It is possible that the air inlet is blocked by foreign matter- Please remove foreign matter from the air inlet
Filter cleaning light does not extinguish- It may be that the "UV" button is not long pressed for 3 seconds after the filter assembly is replaced- After cleaning the filter assembly, long press the "UV" button for 3 seconds
It is hard to eliminate the odor and smoke- It may be that the filter assembly is also wrapped in a packaging bag- Please remove the packaging bag outside the filter assembly

Please send it to repair in case of the following:

  1. If the operation is abnormal or the machine does not operate, and the above method is invalid;
  2. Substances or water from the outside have entered and abnormal operation has occurred.

Eureka's three-year limited warranty

Midea America Corp. (“Eureka”), subject to the terms and conditions herein, warrants this air purifier to be free from defects in material and workmanship for a term of five years from the date of original purchase when used in accordance with the Eureka operating and maintenance instructions and under normal household usage.

Pros & Cons

Pros

  • True HEPA filter captures 99.97% of particles as small as 0.3 microns
  • 3-stage filtration system for cleaner air
  • Sleek and modern design
  • Quiet operation
  • Energy-efficient

Cons

  • Filter replacement can be expensive
  • May not be effective in very large rooms

Customer Reviews

Customers love the Eureka Air Purifier NEA129 for its quiet operation and effective air cleaning. Some common complaints include the high cost of filter replacements and the unit's inability to effectively clean very large rooms.

PDF

Faqs

Is the Air Purifier certified as Energy Star?

It's true that the Eureka Air Purifier NEA129 is Energy Star certified, meaning that it uses less energy and operates effectively, giving it a green option.

How can I determine when to change the Eureka Air Purifier NEA129 filters?

When the control panel's filter replacement indicator illuminates, it is necessary to change the filters to ensure continued effective air filtration.

How can I troubleshoot the NEA129 for inadequate air purifying performance?

A clean and well installed filter system is essential. Examine the air intakes and exits for any obstructions. If needed, turn up the fan speed.

Is the Eureka Air Purifier NEA129 effective for asthma and allergies?

Allergy and asthma patients can find relief from airborne particles such as dust, pollen, pet dander, and allergies thanks to the Eureka Air Purifier True HEPA filter, which collects 99.97% of them.

If strange noises are coming from my Air Purifier, what should I do?

Look for any loose parts or blockages. Make sure the filters are placed properly. For assistance, get in touch with Eureka customer care if the noise continues.

For the first time, how do I set up my Eureka?

Take the Eureka Air Purifier NEA129 out of its box, take off all of the wrapping, put the filters in, plug it in, and turn it on. To begin air purification, select the fan speed that you want.

How frequently should I change the Eureka filters?

Depending on usage and air quality, the True HEPA filter should be changed every 12 months and the activated carbon filter every 3 to 6 months.

How can I reset the Eureka Air Purifier NEA129 filter replacement indicator?

To make sure your purifier tracks the usage of the new filter, press and hold the filter reset button for three seconds after replacing the filters. This will cause the indicator light to go off.

Can I use the Eureka all the time?

Eureka Air Purifier NEA129 is intended to operate continuously, yes. Implementing it around-the-clock guarantees a steady enhancement of the indoor air quality.

What is the warranty on the Eureka Air Purifier?

Eureka Air Purifier NEA129 comes with a 2-year limited warranty.

Electric Rice Cooker-SS 16021

DC Folding Seat 13520A

Leave a Comment

Name

Email

Comment