Evenflo Amp No-back Booster Seat ‎34112329 Introduction

A sturdy, lightweight booster seat that will keep your child secure in your vehicle. This booster seat has two cup holders, machine-washable seat pads, and a contoured seat with integrated armrests for enhanced comfort. It is appropriate for kids 40–110 pounds and 40–57 inches tall. It gives parents who are on the go peace of mind by meeting or surpassing all federal safety criteria. The price of the Evenflo Amp No-back Booster Seat is $49.99, making it an affordable choice for many parents. This booster seat was launched in 2020, and it has already become a popular choice among parents due to its many features and benefits.

Storing Your Instructions

Visual Glossary

Detailed Specifications

The Evenflo Amp No-back Booster Seat has the following key features:

• Lightweight and easy to transport
• Two cup holders for drinks and snacks
• Comfortable seat cushion with energy-absorbing foam liner
• Vehicle seat belt guides for proper positioning
• Machine-washable seat pad
• Minimal assembly required
• Meets or exceeds all federal safety standards
• 6-position height adjustment
• Weight capacity: 40-110 pounds
• Age: 4 and up

Amp Seat Features

Front

1. Armrest
2. Seat Pad

3. Elastic or Mesh Cup Holder
   Not all features are available on all models. Styles may vary.

   Bottom

4. Instruction Storage Area
5. Shoulder Belt Clip Storage Area
6. Shoulder Belt Clip
7. Instruction Storage Area

8. Shoulder Belt Clip Harness

   

Description

Children can ride safely and comfortably with the Evenflo Amp No-back Booster Seat, which is lightweight and simple to use. It has a cozy seat cushion with an energy-absorbing foam liner for added comfort on lengthy car trips. Drinks and nibbles fit perfectly in the two cup holders on either side of the seat, which are also simple to remove for cleaning. The seat belt guidelines in the car make sure the belt is over the child's chest and hips correctly, offering the most possible protection in case of an accident. With its six height settings, the booster seat can grow with the child and still fit them properly as they get bigger.

Attaching the Seat Pad

1. Position seat facing up. Wrap the seat pad around the front of the seat. Make sure the seat pad is straight and positioned correctly on the seat.
2. Connect elastic loops to hooks on the underside of the seat.

3. Wrap the seat pad around the back of the seat. Make sure the seat pad is straight and positioned correctly on the seat. Connect elastic loops to hooks on the underside of the seat.

   

When to Put Your Child in a Booster Seat

Booster seats raise the child up and help to position the vehicle lap and shoulder belt correctly. When the child is properly restrained in a booster seat, their risk of injury in all types of crashes is reduced, as the vehicle’s lap and shoulder belt provides excellent restraint of both the upper and lower torso.

It is important for the child to sit properly within the vehicle seat belts. When the vehicle seat belt is buckled, the lap belt should be low on the hips, just touching the thighs, and the shoulder belt should lie across the middle of the shoulder. If the child leans out or moves the belt behind the back or places it under the arm, it will not provide the intended restraint.

There are a number of things to consider when deciding whether the child is ready to sit in a booster seat, including: the weight and height rating on their current child seat, the child’s own weight and height, their maturity, and the seating positions available in your vehicle.

How is a Booster Seat Used?

Using a booster seat is very similar to buckling yourself into the vehicle:

• Read the instruction manuals for both the booster seat and the vehicle before you start.
• Put the booster in the back seat in a location with a lap and shoulder belt. Never use a booster with only a lap belt, as this could cause serious injuries.
• After the child is in the booster, pull the lap and shoulder belt across him/her and buckle it.
• Check that the shoulder belt lies across the middle of the shoulder and that the lap belt is low on the hips, just touching the thighs.

How can you tell if your child is ready to transition to a booster seat?
You should consider using a booster seat if the following conditions apply:

• The child is mature enough to sit in the booster seat andnot put the belts under their arm or behind their back.
• The child is approaching the weight or height limit of thechild restraint they are currently using.

• If you have a vehicle that does not have a tetheranchorage but has lap/shoulder belts available in theback seat, a booster seat may provide better protectionthan a 5-pt harness seat without the tether.

  

Using the Amp No-back Booster Seat

Child Requirements

• Weight: 18 – 49.8 kg (40 – 110 lbs)
• Height: 102 – 145 cm (40 – 57 inches)
• Age: At least four years old

• Ears below the top of the vehicle seat headrest

  

WARNING: Route lap/shoulder belt under armrests ONLY.

Installation Checklist

1. Place the booster seat on the vehicle seat. 
2. Set the child in the booster seat.
   Make sure the child’s back is flat against the vehicle seat, and the child’s bottom is flat against the booster seat.
3. Secure the child and booster seat to the vehicle seat.
   Stretch the lap/shoulder belt under the armrests and across the child and fasten the buckle.
4. Use the shoulder belt clip, if necessary.

   • If the shoulder belt does not properly lay midway between the child’s shoulder and neck, attach and adjust the belt clip.
     WARNING: The shoulder belt MUST NOT cross the child’s neck or fall off the child’s shoulder. If you cannot adjust the shoulder belt to properly lay midway between the child’s shoulder and neck, try another seating location or do not use the booster seat.

     

5. Check your work.Make sure the lap belt is stretched low and snugacross the child’s hips, beneath the armrests, andfastened into the buckle. The shoulder belt must crossthe child midway between his/her shoulder and neck.Note: If the vehicle’s shoulder belt naturally crossesthe child’s shoulder, you do not need to use theshoulder belt clip.

Important: Always secure the booster seat with the vehicle seat beltswhen not occupied. An unsecured booster seat can fly intoand injure other occupants during a sudden stop or crash.

Using the Amp Shoulder Belt Clip

Styles may vary

1. Remove the shoulder belt clip harness A from the storage area B beneath the booster C.

   • Note: Be sure to remove the rubber band around the strap and dispose of it properly.

     

2. Place booster C on the vehicle seat and attach the shoulder belt clip A to the shoulder belt D.

3. Pull the adjustment strap E until the belt clip A is even with the child’s shoulder and the shoulder belt D lays across the child’s chest midway between his/her shoulder and neck.

   

4. To store the shoulder belt clip harness, fold it and place it in the storage area B.

   

If the shoulder belt does not properly lay midway between the child’s shoulder and neck, attach and adjust the belt clip for proper belt placement.

1. Thread the looped end of the shoulder belt clip strap A through the anchor point on the back of the booster B.

2. Thread the shoulder belt clip C through the loop at the end of the strap A and pull until tight.

   

3. Place booster B on the vehicle seat and attach the shoulder belt clip C to the vehicle shoulder belt D.

4. Pull the adjustment strap E until belt clip C is even with the child’s shoulder and the vehicle shoulder belt D lays across the child’s chest midway between his/her shoulder and neck.

   

Installing the Amp Seat Pad

To install the seat pad A, connect elastic loops B to hooks on the underside of the seat. To remove the seat pad, reverse this procedure.

To install the seat pad A, connect elastic loops B to hooks on the underside of the seat. To remove the seat pad, reverse this procedure.

Using the Cup Holder

Cup holder style may differ from illustration

WARNING

• DO NOT use the cup holder to store cans, bottles, or hard containers. Only for use with soft cups.
• DO NOT place any cups that contain hot liquids in the cup holder.
• DO NOT attach any other item to this booster seat unless it has been certified for use with this specific booster seat.

Care and Cleaning

• To help protect the vehicle upholstery, place a towel beneath and behind the booster seat.
• Plastic parts may be wiped clean with mild soap and water and dried with a soft cloth. Do not use abrasive cleaners or solvents.
• Take care not to damage any labels.
• Machine wash the seat pad separately in cold water, delicate cycle, and tumble dry 10 – 15 minutes on low heat.
• Never use the booster seat without the seat pad.

Troubleshooting

Here are some common issues that parents may encounter with the Evenflo Amp No-back Booster Seat and how to resolve them:

• Issue: The seat belt does not seem to be properly positioned.
  Solution: Make sure to use the vehicle seat belt guides to position the seat belt correctly across the child's chest and hips.
• Issue: The seat cushion is stained or dirty.
  Solution: The seat pad is machine-washable, so you can easily remove it and clean it as needed.
• Issue: The booster seat is difficult to install.
  Solution: Make sure to follow the instructions carefully when installing the booster seat. If you still have trouble, contact Evenflo customer support for assistance.

Replacement Parts

You can order replacement parts online at http://www.evenflo.com or contact Evenflo. When you contact us, please have the product model number and date of manufacture (found on the bottom of the booster seat).

Limited Warranty

For a period of 90 days from the original purchase of this product, Evenflo warrants to the original end user (“Purchaser”) this product (including any accessories) against defects in material or workmanship. Evenflo’s sole obligation under this express limited warranty shall be, at Evenflo’s option, to repair or replace any product that is determined to be defective by Evenflo and determined to be covered by this warranty.

Pros & Cons

Pros

• Lightweight and easy to transport
• Comfortable seat cushion with energy-absorbing foam liner
• Vehicle seat belt guides for proper positioning
• Machine-washable seat pad
• Affordable price

Cons

• May not be as durable as some other booster seats
• Not suitable for children under 4 years old
• No harness or other restraint system, so it relies on the vehicle's seat belt for protection

Customer Reviews

The Evenflo Amp No-back Booster Seat has received mostly positive reviews from customers. Many parents appreciate the lightweight and easy-to-use design, as well as the comfortable seat cushion and cup holders. Some common complaints include the lack of durability and the fact that it relies on the vehicle's seat belt for protection. However, overall, parents seem to be happy with their purchase and would recommend this booster seat to others.