Introduction

The Folio Stroller's lightweight design makes it easy to move and transport. It has a one-handed, self-standing fold for simplicity and a multi-position reclining seat to keep your youngster comfortable. The big canopy offers plenty of sun protection, while the spacious storage basket and parent cup holder make it convenient for everyday outings. Whether you're navigating metropolitan streets or suburban parks, the Evenflo Folio Stroller will make your excursions easier and more fun. The Folio Stroller is available for an estimated price of $319.97 and was launched in 2021.

Identification of Parts

Detailed Specifications

• Weight: 18 pounds
• Dimensions: 25.5 x 17.3 x 40.2 inches
• Age range: 6 months to 50 pounds
• Multi-position reclining seat
• Large canopy with peek-a-boo window
• Parent tray with two cup holders
• Child tray with cup holder
• Front-swivel wheels with locking option
• One-hand fold
• Five-point harness with soft harness pads

Features

1. Parent’s Handle
2. Cup Holder
3. Canopy
4. Shoulder Straps
5. Harness Covers
6. Waist Restraint
7. Front Wheel
8. Child’s Tray
9. Footrest
10. Side Frame Lock
11. Storage Basket
12. Multi-Position Recline Strap
13. Rear Wheel
14. Brakes

Important Information

Child Requirements: Only use the stroller in the upright position with a child who is capable of sitting upright unassisted.

• Maximum weight: 50 lbs (22.6 kg)
• Maximum height: 38 inches (96 cm)

Important: Read instructions carefully before use. Save these instructions for future reference. It is very important to assemble the stroller according to these instructions. DO NOT USE YOUR STROLLER UNTIL YOU HAVE READ AND UNDERSTOOD THESE INSTRUCTIONS.

Description

For parents who lead busy lives, the Evenflo Folio stroller is an ideal choice because it is both versatile and convenient. It has a reclining seat with multiple positions that you can customize to fit your child's comfort level. In addition to offering plenty of shade, the huge canopy features a peek-a-boo window that lets you monitor your youngster. In addition to two cup holders, the parent tray includes a storage space for your keys, phone, and other small belongings. The child tray is readily removable for washing and features a cup holder. For simple mobility and stability, this stroller has front-wheel swivel wheels with a locking option. When the stroller is not in use, it is simple to fold and store thanks to the one-hand fold feature. Your youngster is safe and comfortable thanks to the five-point harness with plush harness pads.

Assembling Your Stroller

WARNING: Care must be taken when folding or unfolding the stroller to prevent finger injury to you or your child in hinge areas. To protect flooring, place a protective covering (cardboard, towel, small rug, or blanket) beneath the stroller during assembly.

1. Unlatch side frame lock A, and lift up on the parent’s handle B.
   To lock the stroller in the open position, put palms under the parent’s handle to give an upward force away from your body. Pull upward until the stroller opens fully with an audible click. Make sure the stroller locks in the open position by pushing down on the parent’s handle.

   

2. Turn the stroller upside down, so the rear of the stroller is facing upwards.
   • To attach rear wheels, push the wheel onto the rear leg tube until it clicks into place. Repeat on the other side.

   • Pull on the wheels to make sure both are securely attached.

     

3. Turn the stroller so the front of the stroller is facing upwards.
   • Slide a front wheel assembly D into the front frame leg E until it locks into place with an audible click. Pull downward on the front wheel assembly to make sure it is locked securely. Repeat for the other side.
   • Turn the stroller right side up onto its wheels

     • To remove, push metal button C and pull the wheel off the stroller.

       

4. To attach the child tray, push tabs F into openings G on the stroller. Make sure the child tray locks into position with audible clicks. Pull on the child tray to make sure it is locked into place.

   

5. To remove the child tray, push both tabs H under the fabric and remove the tray from the stroller.

   

Using Your Stroller

1. WARNING: Always lock both brakes. Make sure the brakes are on by trying to push the stroller.
   Step on the rear brake levers I to lock the rear wheels on the stroller. To release the brakes, lift up on the brake levers.
2. To extend the canopy, pull it forward as shown.
   To close, push the canopy toward the parent’s handle as shown.

3. To attach the cup holder J, slide it down on the mount K until it locks in place with an audible click. Pull on the cup holder to make sure it is locked into place.
   WARNING: DO NOT place hot liquids in the cup holder. Spills can burn you or your child.
   To remove the cup holder J, slide the cup holder up off of the mount K.

   

4. WARNING: To avoid serious injury from the child falling out of the stroller, DO NOT raise or recline the seat with the child in the stroller.
   To recline the seat, squeeze adjuster L and pull down the recline strap on the rear of the seat.
   To raise the seat, hold the D-ring M on the strap, then slide the adjuster toward the seat.

5. WARNING: Care must be taken when folding or unfolding the stroller to prevent finger injury to you or your child in hinge areas.
   To fold the stroller, lock the rear brakes, close the canopy, and remove your child.
   Pull the in-seat fold strap N located under the pocket in the seating area until the side frame lock O clicks into place.
   After you pull the in-seat fold strap, you may need to push the stroller together for the side frame lock to fully lock in place.
   To unfold the stroller, see page 3.

   

6. WARNING: Avoid serious injury from falling or sliding out. ALWAYS use the waist restraint.
   Note: Verify the stroller is locked in the open position by lifting up the rear of the stroller using the parent’s handle. Lock the rear brakes and remove the child tray (page 4).
   5-point Harness
   The harness shoulder straps P must be at shoulder height or lower, closest to the baby’s shoulders Q.
   Place the baby in the seat and bring the crotch panel R up between the child’s legs. Fasten each buckle S. For a snug, comfortable fit, pull the shoulder straps P to tighten the shoulder restraint and pull the waist restraint straps T to tighten the waist restraint.
   Note: To loosen the waist straps T, push in the release button U on the buckle and pull. To loosen shoulder straps, push up on the retainer V while pulling down on the shoulder strap. Once the child is properly restrained, re-attach the child tray. Make sure the child tray locks into position with audible clicks. Pull on the child tray to make sure it is locked into place

   

   
   3-point Harness
   To change from a 5-point to a 3-point harness: Unlock the Harness: Depress button W as shown. Remove harness shoulder strap P from each buckle S, as shown. Store shoulder harness straps for future use.

   

Using Your Stroller with the LiteMax Infant Car Seat

WARNING

• Only use the Evenflo LiteMax infant car seat with this stroller. Other infant car seats or carriers are not designed to fit the stroller frame and if used with this stroller may result in serious injury to your child.
• Before using the LiteMax infant car seat with this stroller, read all the instructions provided with it and keep the instructions stored properly for future use.
• DO NOT lift the stroller by using the LiteMax infant car seat handle when installed on the stroller.
• If unable to securely attach the LiteMax infant car seat to this stroller, remove the car seat .
• To avoid serious injury, make sure the LiteMax infant car seat is securely snapped onto the car seat mounts.
• Some LiteMax infant car seats have a blanket/boot option that must be removed for proper attachment to this stroller.

1. Fully recline the stroller seat back (page 6).
2. Make sure the child tray is securely latched (page 4).
3. The LiteMax infant car seat A MUST be facing the parent when installed. Position the infant car seat over the stroller. Touch the rear vertical surface B of the infant car seat against the rear vertical surface C of the child tray. Lower the infant car seat into the stroller and push down on the handle. The infant car seat will click when fully locked into place.

4. Pull up on the front and back of the LiteMax infant car seat to ensure that it is properly locked into place.

   

Checklist for Proper Installation

• Make sure the LiteMax infant car seat A is in the rear-facing position (facing the parent).
• Make sure the LiteMax infant car seat is securely locked into the car seat mounts D and resting on the child tray C. 
  Note: Car seat mounts are behind fabric, and not visible.

• Pull up on the front and back of the LiteMax infant car seat to test that it is properly locked into place.

  

Using Your Stroller with the LiteMax Infant Car Seat

• To remove the infant car seat, pull the release handle E with one hand while lifting up on the carry handle F with the other hand. Note: Refer to your LiteMax infant car seat instructions for proper handle use.

  

Care and Maintenance

• Clean minor spills and stains on cloth or plastic surfaces with cold water and mild soap. Air dry.
• Metal and plastic parts can be wiped clean with a soft damp cloth and dried with a soft cloth. DO NOT use abrasive cleaners or solvents.
• An occasional drop of vegetable oil may reduce wear and tear on moving parts.

Troubleshooting

• Problem: The stroller is hard to maneuver.
  • Solution: Check if the front-swivel wheels are locked. If they are, unlock them for easy maneuverability.
• Problem: The canopy is not providing enough shade.
  • Solution: Make sure the canopy is fully extended and the peek-a-boo window is closed.
• Problem: The stroller is not folding properly.
  • Solution: Make sure to follow the instructions for folding the stroller properly. If the stroller is still not folding, check for any obstructions that may be preventing it from folding correctly.

Limited Warranty

For a period of 90 days from the original purchase of this Product, Evenflo warrants to the original end user (“Purchaser”) this Product (including any accessories) against defects in material or workmanship. Evenflo’s sole obligation under this express limited warranty shall be, at Evenflo’s option, to repair or replace any Product that is determined to be defective by Evenflo and determined to be covered by this warranty.

Pros & Cons

Pros

• Lightweight and compact
• Multi-position reclining seat
• Large canopy with peek-a-boo window
• Parent tray with two cup holders
• One-hand fold feature

Cons

• May be difficult to maneuver on rough terrain
• Cannot be used for newborns

Customer Reviews

The Evenflo Folio Stroller 57312205 has received positive reviews from customers. Parents have praised its lightweight and compact design, easy maneuverability, and comfortable seat. However, some customers have noted that the stroller may be difficult to maneuver on rough terrain and cannot be used for newborns.