Evenflo Multi-Use Décor Tall Walk-Thru Gate 4471110 Introduction

A chic and adaptable safety option that will keep your kids and pets safe. This gate's elegant style blends in with any interior decor, and its lofty height adds extra security. This gate is ideal for use in hallways, stairwells, and doors because of its sturdy structure, simple walk-through door, and ease of installation. A dependable option for any home, the Evenflo Multi-Use Décor Tall Walk-Thru Gate 4471110 lets you control access to certain areas while maintaining security.
The price of the Evenflo Multi-Use Décor Tall Walk-Thru Gate is $62.99.

Parts List

Detailed Specifications

Here are the key features of the Evenflo Multi-Use Décor Tall Walk-Thru Gate:

• Fits openings between 29 and 42 inches wide
• Walk-through design with double-locking system
• Easy to install with included hardware
• Stylish décor design with neutral color options
• Pressure-mounted system for added stability
• One-handed operation for convenience
• Optional stopper to prevent gate swing
• Meets or exceeds all safety standards

Proper Set-Up Configurations

Description

For your children's safety at home, the Evenflo Multi-Use Décor Tall Walk-Thru Gate is a useful and stylish option. The gate's dimensions range from 29 to 42 inches, and installing it is simple with the hardware that comes with it. Its double-locking mechanism and walk-through design make it simple to operate while guaranteeing the safety of kids and pets. You can restrict the gate from swinging in specific locations with the optional stopper, and the pressure-mounted mechanism adds extra stability. This gate is a chic addition to any house thanks to its décor style and selection of muted colors.

Gate Assembly

WARNING: DO NOT remove cardboard cover (or plastic tie beneath it) at this time, or serious injury may result.

1. Measure and record the width of the opening where you will use the gate.
   If the opening is wider than 33 in. (83.8 cm), refer to page 2 for Proper Set-Up Configurations.
   NOTE: If frame extension is not required, go to Step 3.

   

2. If frame extension is required, insert small extension pins E into the upper and lower openings in the gate frame A, as shown. Push the appropriate frame extension B onto the extension pins E. Make sure the plastic caps on the gate frame A and the gate extension B touch each other. The plastic caps MUST touch each other to securely install the frame extension.
   NOTE: Frame extension can be installed on either side of gate.

   

3. Push four adjustment bumpers D into the corners of the gate frame A or the frame extension B.
   NOTE: Make sure the adjustment bumpers are pushed all the way in.

   

   WARNING: Distance between gate frame and door frame should be equal on both sides, and NEVER exceed 2.75 in. (6.9 cm). If 2.75 in. (6.9 cm) is exceeded, move to the next configuration on page 2.

   

    

   Gate Installation

4. Position gate A on floor in center of opening, making sure that it is straight up and down (90º to the floor).
   NOTE: Adjustment bumpers may mark some mounting surfaces.
   NOTE: If not installing gate at top of stairs, go to step 8.

   

   WARNING:Mounting caps MUST be installed to use gate at top of stairs.
   NOTE: If not installing gate at top of stairs, go to step 8.

5. Peel backing off one side of adhesive pad G. Adhere pad to outside of mounting cap F, as shown.
   Peel backing off other side of adhesive pad, and place mounting cap over end of adjustment bumper D.
   NOTE: Make sure gate stays straight up and down (90º to floor) and in center of during this process.
   Slide adjustment bumper D out of gate frame toward door frame, until mounting cap sticks to door frame. Repeat this for other three mounting caps.
6. Once all four mounting caps are in place remove gate from opening in order to secure mounting caps to door frame with supplied screws I. Tighten all four screws securely with handheld Phillips screwdriver, but do not overtighten.
   NOTE: If mounting to drywall, mark center of mounting caps. Pull mounting caps off wall. Drill holes and insert wall anchors H. Secure mounting caps with screws. Tighten all four screws securely with handheld Phillips screwdriver, but do not overtighten.

7. Position gate A on floor in line with mounting caps.

   

8. Turn both upper adjustment bumpers D and both lower adjustment bumpers D, as shown, until all four contact the door frame or mounting caps.
   Check that the gate is still straight up and down then turn each bumper two more full rotations or until tight.

9. Test to make sure the gate frame assembly is secure by firmly shaking it. If it moves, it needs to be re-installed. Repeat steps 8 – 9.

   

   WARNING: BEFORE removing the CARDBOARD COVER and cutting the PLASTIC TIE, ENSURE the gate is securely in place or serious injury may result.

10. With your gate securely in place, remove the cardboard cover, then cut and discard the plastic tie.

    

11. Adjust both upper bumpers D until the gap between the handle J and latch K is 1/8 in. (3.2 mm).

12. Inspect the gate. Make sure it swings freely and latches securely.

    

13. When using at the top or bottom of stairs, pivot the swing stop L down to the locked position on the opposite side of the gate from the stairs. This will prevent opening the gate into the stairway. In all other locations, pivot the swing stop down to the locked position on the side of the gate that the child occupies.

    

14. To open gate, slide and hold release button M. Lift up on gate handle J and swing gate open.
15. To close gate, gently push gate closed.

16. When indicator N is green, gate is latched. When indicator is red, gate is NOT latched.

    

Care and Maintenance

• Wash gate with mild soap and warm water and dry thoroughly before using.
• Metal and plastic parts can be wiped clean with a soft damp cloth and dried with a soft cloth. DO NOT use abrasive cleaners or solvents.
• An occasional drop of vegetable oil may reduce wear and tear on moving parts.

Troubleshooting

Here are some common problems and solutions for the Evenflo Multi-Use Décor Tall Walk-Thru Gate:

• Problem: The gate won't stay in place.
• Solution: Make sure the gate is properly installed and adjusted to the correct width.
• Problem: The gate is difficult to open and close.
• Solution: Make sure the double-locking system is properly aligned and engaged.
• Problem: The gate swings open unexpectedly.
• Solution: Use the optional stopper to prevent the gate from swinging in certain areas.

Warranty

For a period of 90 days from the original purchase of this Product, Evenflo warrants  to the original end user (“Purchaser”) this Product (including any accessories) against defects in material or workmanship. Evenflo’s sole obligation under this express limited warranty shall be, at Evenflo’s option, to repair or replace any Product that is determined to be defective by Evenflo and determined to be covered by this warranty.

Pros & Cons

Pros

• Stylish and neutral color options
• Walk-through design with double-locking system
• Pressure-mounted system for added stability
• Optional stopper to prevent gate swing
• Easy to install with included hardware

Cons

• May not fit openings wider than 42 inches
• Double-locking system can be difficult to engage at times

Customer Reviews

Customers who have purchased the Evenflo Multi-Use Décor Tall Walk-Thru Gate have praised its stylish design and easy installation. Many reviewers have noted that the gate is sturdy and secure, and the double-locking system provides added peace of mind. However, some reviewers have noted that the gate can be difficult to open and close at times, especially if the locking system is not properly engaged. Overall, reviewers have found the Evenflo Multi-Use Décor Tall Walk-Thru Gate to be a practical and attractive solution for keeping their little ones safe at home.

Common Complaints

Some common complaints about the Evenflo Multi-Use Décor Tall Walk-Thru Gate include difficulty opening and closing the gate, as well as issues with the pressure-mounted system not being stable enough. Some reviewers have also noted that the gate does not fit openings wider than 42 inches as advertised. However, these complaints are relatively rare, and most customers have found the gate to be a reliable and effective solution for keeping their little ones safe.