Introduction Evenflo Pivot Expand Stroller Second Seat

The Evenflo Pivot Expand Stroller Second Seat is an essential addition for families with multiple children, allowing for seamless transitions from a single to a double stroller. This seat easily attaches without tools, providing a comfortable and secure ride for a second child. It features a lay-flat carriage mode, adjustable canopy, and accommodates children up to 55 pounds. Designed for convenience and versatility, the Evenflo Pivot Expand Stroller Second Seat is priced at approximately $99.99.

STROLLER SECOND 

Compatible with Evenflo Pivot Xpand Modular 
Travel System and Pivot Xpand Modular Stroller

Stroller

• Up to 55 lbs (25 kg) 
• Up to 38 in. (96 cm)

Detailed Specifications 

The Evenflo Pivot Expand Stroller Second Seat comes with several key features that make it a valuable addition to any family's baby gear:

• Weight Capacity: Supports children up to 35 pounds and 35 inches tall.
• Easy Installation: Simple and quick attachment to the Pivot Expand stroller frame.
• Adjustable Canopy: Provides shade and protection for the second child.
• Compact Fold: Allows for easy storage when not in use.
• Safety Features: Includes a 5-point harness for secure seating.

FEATURES 

• Canopy
• Canopy Window (see page 10)
• Multi-Position Recline (see page 11)
• Toddler Seat Release Button
• Footrest Adjustment Button
• Footrest
• Buckle
• Harness Covers
• Bumper Bar
• Shoulder Straps

IDENTIFICATION OF PARTS

WARNING

READ AND FOLLOW ALL WARNINGS AND INSTRUCTIONS! FAILURE TO DO SO COULD RESULT IN SERIOUS INJURY OR DEATH!

• NEVER leave child unattended. ALWAYS keep child in view while in the stroller.\
• Adult assembly required. Take care when unpacking and assembling; contains small parts and some items with sharp edges.
• To prevent a possible choking hazard, remove and discard packing material before using this product.
• Avoid serious injury from falling or sliding out. ALWAYS use waist restraint.
• DO NOT hang items on handle bar or place them on the canopy as they can tip stroller over and injure child.
• Be sure stroller is fully assembled and locked in unfolded position before using.
• To avoid serious injury from child falling out of stroller,   DO NOT raise or recline seat with child in stroller.
• DO NOT use stroller seat if any parts are missing or broken.
• DO NOT allow child to stand on the footrest. Stroller may tip over and injure child.
• DO NOT carry additional children, goods, or accessories in or on this stroller except as advised in these instructions. 
• AVOID STRANGULATION:
  • DO NOT suspend strings or toys from the canopy.
  • DO NOT place stroller anywhere near cords from window blinds, draperies, phone, etc.
  • DO NOT place items with a string around your child’s neck such as hood strings or pacifier cords.
  • If not properly secured, the child may slip into leg openings and strangle.
• When making adjustments to the stroller, ALWAYS ensure that all parts of the child’s body are clear of any moving parts of the stroller.
• The canopy is not intended to provide UV protection.
• To ensure safety for your baby, please refer to the manufacturer’s instructions for the use of your recommended infant car seats and keep all instructions available for reference.
• DO NOT lift stroller by using the infant car seat handle when installed on stroller.
• If unable to securely attach the infant car seat to this stroller, remove the car seat and contact Evenflo ParentLink at 1-800-233-5921 (USA), 1-937-773-3971 (Canada), or 01-800-706-12-00 (Mexico).
• Never use the toddler seat without the canopy attached.
• Never lift or carry the toddler seat by the armbar.
• Never use toddler seat in a motor vehicle or use it as a booster seat.
• To avoid falls, never remove toddler seat from the stroller with child in it.
• To avoid falls, always make sure the toddler seat or car seat is securely attached into the seat mounts on both sides of the stroller before placing child in the seat.
• When stroller seat is in infant mode, it is intended for a child up to 6 months of age.
• Never use seat in the infant mode position unless the straps under the seat are unbuckled and the seat is set up in infant mode as per the instructions.
• To avoid tipping, always remove the heavier weight child from a seating position before removing the lighter weight child.
• To avoid serious injury, NEVER use the stroller in any other configuration other than what is shown in the instruction manual. Your stroller can be used in multiple configurations both as a single and double stroller, (see page 21-22)
• DO NOT exceed the maximum weight limits defined in the infant car seat or accessory manuals.

IMPORTANT INFORMATION 

Child Requirements

When stroller seat is in infant mode, it is intended for a child up to 6 months of age. Only use the stroller in the upright position with a child who is capable of sitting upright unassisted.

• Maximum weight: 55 lbs (25 kg) in stroller seat 
• Maximum height: 38 inches (96 cm)

IMPORTANT: Read instructions carefully before use. Save these instructions for future reference. It is very important to assemble the stroller according to these instructions.  If you are missing parts, do not use stroller and call Evenflo ParentLink.

Registration Information

Please register this product so we can reach you if there is a safety alert or recall. We will not sell, rent, or share your personal information. To register your product, please complete and mail the card that came with it or visit our online registration at https://www.evenflo.com/registerproduct 

CHOOSING MODE OF USE

YOUR STROLLER SEAT CAN BE USED IN TWO DIFFERENT MODES. INFANT MODE OR TODDLER SEAT MODE.

Your stroller seat is shipped in infant mode with the buckles unfastened under the footrest. You will need to follow the instructions completely to make sure you set up your stroller  in your preferred mode of use.  You can choose to set the stroller up in   Infant Mode or Toddler Seat Mode. Follow the instructions on pages 8 - 16.

Description

The Evenflo Pivot Expand Stroller Second Seat is designed to integrate seamlessly with the Pivot Expand stroller, offering a convenient solution for families with two young children. The seat is made from durable materials and features an adjustable canopy to provide optimal comfort and protection from the sun. The 5-point harness ensures that the child is securely seated, while the easy installation process makes it simple to switch between single and double stroller configurations. This accessory enhances the functionality of the Pivot Expand stroller, making it an indispensable tool for parents on the go.

ASSEMBLING YOUR STROLLER

TODDLER SEAT MODE

1. To set up seat in toddler seat mode, flip toddler seat over and attach the buckles on the seat as shown.

2. To attach toddler seat, slide seat onto the mounts until they click into place as shown. The toddler seat may be attached forward-facing or rear-facing.
   PULL UP on seat to make sure it is securely attached to the mounts.

   BUMPER BAR

3. To attach bumper bar, push tabs into  openings on stroller. Make sure bumper bar locks into position with audible clicks. 
   PULL ON the bumper bar to make sure it is locked into place.
   To remove the bumper bar, push both tabs and remove the bar from the stroller. 

   

USING YOUR STROLLER

FOOTREST

1. To adjust the footrest, push both buttons and lift the footrest up or down to desired position. 

   

2. To extend canopy, pull it forward as shown. 
   To close, push canopy toward parent’s handle as shown.
   Open or close canopy window as shown. 

3. To remove canopy, unfasten canopy mounts from sides of stroller then unfasten Velcro on rear of seat and pull fabric off the handle. To re-attach, reverse the steps.

   

   RECLINING SEAT

4. WARNING: To avoid serious injury, DO NOT raise or recline seat with child in stroller.
   To recline toddler seat, lift handle at the top of the seat and rotate seat into one of 3 positions.

   

   REMOVING THE TODDLER SEAT

5. To remove toddler seat, push in the buttons on both sides of the seat and lift seat up as shown.

   

   HARNESS

6. WARNING: To avoid serious injury from falling or sliding out, ALWAYS use waist restraint.
   To attach the harness, click buckles into the crotch strap buckle. Pull waist straps to tighten. Shoulder straps must be at shoulder height or lower, closest to the baby’s shoulders. 
   For a snug, comfortable fit, adjust height of strap and tighten, pull down on free end of strap.
   To loosen straps, push up on retainer and pull the shoulder strap down.
   To unlock harness, push the button on the crotch buckle.

   

   SETTING UP STROLLER SEAT IN INFANT MODE FROM TODDLER SEAT MODE

7. WARNING: To avoid serious injury, never use seat in the infant mode position unless the straps under the seat are  unbuckled and the seat is set up in infant mode as per the instructions.

8. Lift handle up and rotate seat down. 

   

   WARNING: To avoid serious injury, never use seat in the infant mode position unless the straps under  the seat are unbuckled and the seat is set up in infant mode as per the instructions.

9. Unfasten the buckles behind the leg rest on toddler seat as shown below. THE BUCKLES MUST BE UNFASTENED before placing child into the seating area.

10. Press down on the inside of the toddler seat to flatten out the inside.

    

    REVERSING SEAT POSITION

    WARNING: To avoid falls, NEVER lift or carry toddler seat by the bumper bar or with child in it.  The toddler seat is not a carrier.
    To remove and use in rear-facing mode: push in the release buttons on both sides of the toddler seat. Lift the seat off stroller frame and turn it around and re-attach.
    CHECK to make sure it is securely attached on both sides by pulling up on it.

    

USING YOUR STROLLER AS A DOUBLE STROLLER

WARNING

• Before using the toddler seat, read all the instructions provided with it and keep the instructions stored properly for future use.
• If unable to securely attach your second toddler seat to this stroller, remove the car seat.
• To avoid serious injury, make sure the toddler seat is securely snapped onto the car seat mounts.

1. TO SET UP AS A DOUBLE STROLLER, lock brakes then set up the lower seat mount position by squeezing the button. While squeezing button in, pull up, then push tube away from you. This will rotate the mounts forward into position until the tube clicks into place as shown.
   Helpful Hint:  You must squeeze the button first before pulling up.  If the button gets stuck, press the mounts down so button clicks out and start again.
   If mounts are folded over, click into upright position as shown.

   

2. TO FOLD LOWER SEAT MOUNTS, squeeze button in 1 , then push mount 2 forward. 

   

3. There are 3 seating mount positions:
   • Lower seat mount position
   • Single seat mount position

   • Upper seat mount position
     Once the lower seat mounts are set up into position (p.17) press the button on single seat mounts and slide them up into the upper mount position to allow for room to place the toddler seat in the lower mount position.
     Once you have slid both seat mounts from the single seat mount position to the upper mount positions, your stroller is ready to be set up into double stroller mode.
     Double check mounts are locked into position by pushing them up or down on the slide track before placing the stroller seat onto the stroller.

     

4. To attach toddler seat, slide seat onto the lower seat mounts until they click into place as shown. PULL UP on seat to make sure it is securely attached to the mounts.
   To attach second toddler seat to the upper mount position, line up hub of handle with the seat mounts. Insert the car seat into the mounts until they click into place on both sides of the frame. LIFT UP on the toddler seat to make sure that it is securely attached.
   Your double stroller mode is now ready to use. You can use the toddler seat in any of the locations that are shown in the Pivot Expand Use Configurations section that follows. 

   

PIVOT XPAND USE CONFIGURATIONS

WARNING

• To avoid tipping, always remove the heavier weight child from a seating position before removing the lighter weight child.
• To avoid serious injury, NEVER use the stroller in any other configuration other than what is shown in this instruction manual. Your stroller can be used in multiple configurations both as a single and double stroller, (see page 21-22)
• DO NOT exceed the maximum weight limits defined in the infant car seat or accessory manuals.
• For additional use configurations with optional accessories, you can refer to the manuals that are provided with the Pivot Xpand Accessories, which are sold separately. These include but are not limited to: infant car seat adapters for other manufacturer’s carseats and a Rider Board.

Setup Guide

To set up the Evenflo Pivot Expand Stroller Second Seat, follow these steps:

1. Ensure the Pivot Expand stroller frame is in the unlocked position.
2. Align the second seat with the stroller frame's attachment points.
3. Securely click the seat into place, ensuring it is firmly locked.
4. Adjust the canopy and harness as needed to ensure comfort and safety for your child.

This process is designed to be quick and straightforward, allowing you to get your stroller ready for use in just a few minutes.

CARE AND MAINTENANCE

• Clean minor spills and stains on cloth or plastic surfaces with cold water and mild soap. Air dry.
• Metal and plastic parts can be wiped clean with a soft damp cloth and dried with a soft cloth. DO NOT use abrasive cleaners or solvents.
• An occasional drop of vegetable oil may reduce wear and tear on moving parts. 

Troubleshooting

If you encounter any issues with your Evenflo Pivot Expand Stroller Second Seat, here are some common problems and solutions:

• Seat Not Attaching Properly: Check that the stroller frame is in the unlocked position and ensure the attachment points are clean and free of debris.
• Canopy Not Adjusting: Verify that the canopy is properly attached to the seat and try adjusting it again.
• Harness Issues: Make sure all harness straps are securely fastened and adjusted according to the child's size.

Always refer to the user manual for detailed instructions and warnings to ensure safe use.

Evenflo Pivot Expand Stroller Second Seat WARRANTY

For a period of 90 days from the original purchase of this Product, Evenflo warrants to the original end user (“Purchaser”) this Product (including any accessories) against defects in material or workmanship. Evenflo’s sole obligation under this express limited warranty shall be, at Evenflo’s option, to repair or replace any Product that is determined to be defective by Evenflo and determined to be covered by this warranty.

Pros & Cons

Pros

• Easy Installation: Quick and simple attachment to the Pivot Expand stroller frame.
• Adjustable Canopy: Provides shade and protection for the second child.
• Compact Fold: Allows for easy storage when not in use.
• Safety Features: Includes a 5-point harness for secure seating.
• Compatibility: Seamlessly integrates with the Pivot Expand stroller.

Cons

• Price Point: May be considered expensive for some budgets.
• Added Weight: Increases the overall weight of the stroller when attached.
• Storage Space: Requires additional storage space when not in use.

Customer Reviews

Customers have generally praised the Evenflo Pivot Expand Stroller Second Seat for its ease of installation, comfort, and safety features. Many parents appreciate how it seamlessly integrates with their existing stroller, providing a convenient solution for transporting multiple children. However, some have noted that it can make the stroller slightly heavier and more cumbersome to maneuver in tight spaces.