Introduction of Firgelli TV Lifting System TVL-170

The Firgelli TV Lifting System TVL-170 is a state-of-the-art solution for discreetly hiding and revealing your television with ease. With a weight capacity of 170 lbs, this lift system is designed to accommodate most televisions on the market. The estimated price of the TVL-170 is around $1,999.00, and it is currently available for purchase.

Overview

• Column: FA-TVL-170 
• Control Box: FA-CB-170 
• Controls: RF and IR Control 
• Accessories: TJB2 Junction Box TSS Safety Switch (optional), and Concealed Switch Box 

The FA-TVL-170 series columns are primarily designed for use as TV lifts, but can be used in other applications that require vertical movement using a remote control. Our steel constructed is available in three sizes depending on the requirements of the application. An extended height position can be programmed using our remote control. 

Package Contents

Appearance

Specifications

2D drawing of the FA-TVL-170 lifting column 

Other components 

Component Package List 

Installation of Firgelli TV Lifting System TVL-170

Important information

Prior to installation onto the FA-TVL-170, remove the stand which is attached to your flat screen TV. Carefully measure all dimensions of the television before proceeding with the installation. 

• Secure the TV 
  Lean the TV onto its edge, preferably against a soft surface to prevent scratches and or damage. 
• Install the Mounting Plates (Fig. 1 and 2) 
  Find the 4 mounting holes on the back of your TV and then choose the 4 screws from the component package that work best for your TV. Install the included TV mounting plates (2) onto the back of the TV. 
• Install the Mounting Brackets (Fig 3) 
  Fix the TV mounting brackets to the TV mounting plates. 

• Mount the TV to the FA-TVL-170 (Fig 4) 
  Install the TV, using the newly installed brackets, to the FA-TVL-170. Screw tight on the top of the brackets. Slowly release the TV to make sure it is installed securely. Plug in the FA-TVL-170 and raise it the full height so that it’s fully extended.   

  

Getting started

Concealed Switch Box: Setting the desired maximum height 

How to set the desired lift height Press and hold the up or down button to the desired height, release the button, and then switch SET to the “ON” position. An audible tone will sound three times from the FA-CB-170 control box, which confirms the height has been memorized.   How to recall the desired lift height After the desired height is memorized, when the SET switch is moved to the “ON” position and then immediately to the “OFF” position, the column will move to the memorized position automatically.   How to disable the desired lift height Switch SET to the “ON” position until you hear the control box beep once. This tone confirms the desired lift height is disabled. Then, move the SET switch to the “OFF” position.

Note: The SET button on the concealed switch box is a rocker switch. If you switch it to the right side, it means “ON”; the opposite (left) side meaning “OFF”.

How to set the maximum desired lift height limit? Press UP until the maximum desired height is reached; switch SET to “ON”, and then press and hold the “UP” button for 3 seconds until you hear two audible beeps from the control box. Then, switch SET to “OFF” and the maximum desired height limitis saved to memory.   How to disable the maximum desired lift height limit? Switch SET to “ON”, then press and hold the UP button for 3 seconds until the control box beeps once. Switch SET to “OFF”. Now, the height limit is disabled.

How to set the minimum desired height limit? (Note) Press UP/DOWN to the desired minimum height, release UP/DOWN, and switch SET to “ON”. Then, press and hold the “DOWN” button for 3 seconds until the FA-CB-170 beeps twice. Switch SET to “OFF” to complete saving the minimum height to memory. How to disable the memorized minimum height limit?     (Note) Press DOWN to the set minimum height, release DOWN, and then switch SET to “ON”. Press and hold the “DOWN” button for 3 seconds until the FA-CB-170 beeps once. Switch SET to “OFF” to complete the process. Note: This is primarily used when the FA-TVL-170 is installed within a TV cabinet.

IR Control: Setting the lift height 

Press and hold the “▲” button on the IR Remote Control. The FA-TVL-170 will continuously travel upwards. Press and hold the “▼” button on the IR Remote Control. The FA-TVL-170 will continuously travel downwards
How to set the memorized height Once the desired height has been reached, press and hold the “M” button until the FA-CB-170 beeps3 times. This confirms the desired height is saved to memory. Click “M” and the FA-TVL-170 will automatically travel to the memorized height. How to disable the memorized height Press and hold the “M” button until the buzzer on the FA-CB-170 beeps once.

RF Control: Setting the lift height 

How to activate the pairing function? Take the Concealed Switch Box and switch SET to “ON” for 10 seconds until the FA-CB-170 begins to beep continuously. Then, press any button on the RF control and the buzzer will then stop. Switch SET to “OFF”, then the pairing function is completed. (Note)   Note: By switching SET to “ON” for approximately 3 seconds, the FA-CB-170 will start to sound (refer to the page 13: Setting up the desired height stage), please do not release SET button, but continue holding until the pairing function is completed.

How to set the desired maximum height limit? Press and hold the “▲” button on the RF Control; The FA-TVL-170 will travel upwards. Once the desired maximum height has been reached, press and hold the “M” and “▲” button until the FA-CB-170 beeps twice. Then release the buttons and the desired height is saved to memory.   How to disable the memorized maximum height limit? Press and hold the “▲” button to travel upwards to the desired maximum height. Then press and hold the “M” and “▲” buttons until the FA-CB-170 beeps once.

How to set the desired minimum height limit? Press and hold the “▲/▼” button on the RF Control to adjust FA-TVL-170. Once the desired minimum height has been reached, press and hold the “M” and “▼” buttons until the FA-CB-170 beeps twice. Then release the buttons and the desired minimum height is saved to memory.   How to disable the memorized minimum height limit? Press and hold the “▼” button traveld own wards to the desired minimum height. Then press and hold the “M” and “▼” buttons until the FA-CB-170 beeps once.

How to set the memorized height Once the desired height has been reached, press and hold the “M” button until the FA-CB-170 beeps3 times. This confirms the memorized height is now saved to memory. Click “M” and the FA-TVL-170 will automatically travel to the memorized height.   How to disable the memorized height To disable the memorized height, press and hold the “M” button until the FA-CB-170 beeps once.

Operation 

Once the memorized height of the FA-TVL-170 column is set, users can use either the RF or IR Control to control movement of the lifting system. 

1. Press and hold the  symbol to move the column upwards.
2. Press and hold the  symbol to move the column downwards.
3. Release the button at▲ any time to stop the column’s movement.
4. The Concealed Switch ▼ Box serves as a back-up control, if both the RF and IR Controls are out of battery.

Safety (for end users) 

1. Please adhere to the proper installation procedure as detailed in the installation instructions.
2. Safety precaution measures must be practiced at all times during installation of this product.
3. The entire installation instructions should be fully read and understood before beginning installation.
4. At least two people should be available to mount the TV on the lift mechanism. Please take care when handling your flat screen TV as injury and damage can result from dropping or mishandling of the TV.
5. TV’s should remain upright at all times. Never place screen face down on the floor. This could cause damage to the TV
6. The stand on your flat screen TV is removable. Please remove the stand prior to installing the TV on the lift mechanism. Consult your TV’s owner’s manual for instructions for removing the stand.
7. Carefully measure all dimensions of your LCD, PLASMA, or LED TV before proceeding. Then consult the Specification section of this manual for maximum acceptable TV size.
8. The TV Lift Mechanism contains moving parts. Please keep hands, arms, and fingers away from the lift and cabinet lid opening when the lift is in motion. Cables should be wire-tied or secured neatly so the lift does not contact them during operation.
9. About the TSS Safety Strip accessory. The TSS safety strip is an optional accessory which can be installed onto the bottom of the TV. To avoid the risk of personal injury, the TSS will stop the lift column once the strip is pressed.

Description of Firgelli TV Lifting System TVL-170

The Firgelli TVL-170 TV Lifting System features a powerful electric motor that allows for smooth and quiet operation. The system is designed to be installed within a cabinet or other furniture piece, with the TV mounted on the lift mechanism. Once installed, the TV can be raised and lowered with the touch of a button, making it perfect for creating a streamlined and clutter-free home entertainment space. The TVL-170 is also equipped with a built-in safety stop, ensuring that the TV remains securely in place when raised to the desired height.

Setup Guide

To install the Firgelli TVL-170 TV Lifting System, you will need to follow these steps:

1. Determine the desired location for the lift system within your furniture piece.
2. Cut a hole in the back or bottom of the furniture piece to accommodate the lift mechanism.
3. Install the lift mechanism into the hole, ensuring that it is level and secure.
4. Mount your television onto the lift mechanism, following the manufacturer's instructions for proper mounting.
5. Connect the lift mechanism to a power source and test the TVL-170 to ensure that it is operating smoothly and quietly.

Firgelli TV Lifting System Troubleshooting

If you experience any issues with your Firgelli TVL-170 TV Lifting System, be sure to check the following:

• Ensure that the lift mechanism is properly connected to a power source.
• Check that the TV is securely mounted to the lift mechanism.
• Verify that the safety stop is engaged and functioning properly.
• Check for any obstructions that may be preventing the lift mechanism from operating smoothly.
• If the lift mechanism still does not operate properly, contact Firgelli customer support for further assistance.

Pros & Cons about Firgelli TV Lifting System TVL-170

Pros

• Effortless operation, with the ability to raise and lower your TV with the touch of a button
• Powerful electric motor for smooth and quiet operation
• Built-in safety stop for added peace of mind
• Can accommodate televisions up to 170 lbs
• Sleek and discreet design for a streamlined home entertainment space

Cons

• Expensive compared to other TV lift mechanisms on the market
• Requires professional installation for best results
• May not be suitable for very large or heavy televisions
• Not compatible with all types of TV mounts