How to Brew: Hamilton Beach Single Serve Coffee Maker Guide

cover-image

Content

hamilton_beach_-logo.png

Hamilton Beach Single Serve Coffee Maker 

The Hamilton Beach Single Serve Coffee Maker is a convenient and compact solution for coffee lovers who prefer a quick and easy cup of joe. This coffee maker is designed to make one cup at a time, and it is compatible with soft coffee pods and ground coffee. With an estimated price range of $30 to $50, this coffee maker is an affordable option for those who want to enjoy a fresh cup of coffee without the fuss.

Parts and Features 

hamilton-beach-single-serve-coffee-maker-parts_and_features.png

WARNING: Burn Hazard. If overflow occurs, unplug and allow coffee maker to cool. To avoid hot coffee overflowing:

  • Fill reservoir with cup or travel mug of water into which coffee will be brewed.
  • Fully insert cup or travel mug on drip tray.
  • Do not lift lid during brewing process.
  • If brew process is stopped early, water must be drained from unit. Place a large mug on drip tray/cup rest. Press BREW REG or BREW BOLD button. Failure to drain unit can cause next cup brewed to overflow.

CAUTION: Cut Hazard. Removable single-serve pack holder has a sharp needle. Piercing needle on underside of lid also is sharp. Use caution when handling.
NOTES

  • Use only cold water in reservoir. Do not use hot water.
  • Do not reheat coffee in machine.
  • Do not use creamer or nondairy creamer in reservoir.
  • After brewing hot cocoa single-serve packs, brew a water-only cycle without a single-serve pack to avoid possibility of clogging piercing needle.
  • Coffee maker brews all water added.
  • Press BREW REG or BREW BOLD button again to STOP brewing midcycle. Remaining water must be removed. See warning statement above.
  • If brew indicator light flashes three times, lid is not closed. Lower lid until it clicks to lock. Press BREW REG or BREW BOLD button.
  • Do not brew coffee without removable needle holder locked into place.

Detailed Specifications

The Hamilton Beach Single Serve Coffee Maker has several key features that make it a popular choice among coffee drinkers. These features include a bold setting that amplifies the flavor of your coffee, a mess-free drip tray that can accommodate travel mugs of various sizes, and a single-serve scoop that measures the perfect amount of ground coffee for one cup. Additionally, this coffee maker has an adjustable stand that can be used with coffee pods or ground coffee, and it comes with a built-in stainless steel mesh filter.

How to Brew a Single-Serve Pack

how_to_brew_a_single-serve_pack-hamilton-beach-single-serve-coffee-maker.png
  1. Plug into outlet.
  2. Lift lid latch until lid clicks into place.
  3. Insert funnel in opening. Place gray removable single-serve pack holder in funnel, aligning handle with funnel handle.
  4. Place a pack into single-serve pack holder. Do not remove foil.
  5. Close lid and snap in place to pierce single-serve pack.
  6. Lift water reservoir lid.
  7. Fill cup or travel mug into which coffee will be brewed and add water to water reservoir. 10 oz. (296 ml) of water is MAX amount for single-serve packs.
  8. Close lid.
  9. Use cup rest for a cup or mug and remove cup rest for a travel mug.
  10. Press BREW REG or BREW BOLD button to start brewing. The brew indicator light will light up to show that coffee maker is brewing. The coffee maker will shut off automatically when brewing is complete.
  11. Press BREW REG or BREW BOLD button to turn off. Unplug.
  12. Funnel and single-serve pack holder should be rinsed after every use.

    how_to_brew_a_single-serve-pack-hamilton-beach-single-serve-coffee-maker.png

Description

The Hamilton Beach Single Serve Coffee Maker is a versatile and easy-to-use coffee maker that can make a variety of coffee drinks. Whether you prefer coffee pods or ground coffee, this coffee maker can accommodate your preferences. The adjustable stand allows you to use coffee pods or ground coffee, and the single-serve scoop ensures that you measure the perfect amount of coffee every time. The bold setting amplifies the flavor of your coffee, and the mess-free drip tray makes it easy to use travel mugs of various sizes. Overall, the Hamilton Beach Single Serve Coffee Maker is a convenient and affordable option for coffee lovers who want a quick and easy cup of joe.

Setup Guide

Setting up the Hamilton Beach Single Serve Coffee Maker is easy and straightforward. First, make sure that the coffee maker is plugged in and that the power switch is in the "off" position. Next, fill the water reservoir with the desired amount of water. If you are using ground coffee, use the single-serve scoop to measure the perfect amount of coffee and place it in the built-in stainless steel mesh filter. If you are using a coffee pod, simply place the pod in the adjustable stand. Finally, turn on the coffee maker and wait for the water to heat up. Once the water is hot, the coffee maker will automatically brew your coffee. When the brewing process is complete, the coffee maker will turn off automatically.

Care and Cleaning

WARNING: Shock Hazard. Do not immerse cord, plug, or coffee maker in any liquid.
CAUTION: Cut Hazard. Removable single-serve pack holder has a sharp needle. Piercing needle on underside of lid also is sharp. Use caution when handling.
General Cleaning

  1. Unplug and allow to cool.
  2. Hand-wash all removable parts in hot, soapy water. Rinse and dry or wash in TOP RACK only of dishwasher. DO NOT use “SANI” setting when washing in dishwasher. “SANI” cycle temperatures could damage your product.
  3. Wipe outside of coffee maker with a soft damp cloth.

Routine Cleaning
All coffee makers should be cleaned at least once a month (once a week for areas with hard water).

  1. Plug into outlet.
  2. Pour 3/4 cup (177 ml) of plain white vinegar and 3/4 cup (177 ml) of cold water into reservoir.
  3. Place a 14-oz. (414-ml) or larger cup or travel mug underneath to catch water/vinegar solution. Press BREW REG or BREW BOLD button once. When solution starts dispensing, press BREW REG or BREW BOLD button again to stop brewing and allow vinegar to clean. After 30 minutes, press BREW REG or BREW BOLD button and allow it to finish brew cycle. When brew cycle is finished, empty cup and rinse. Run 2 to 3 cycles of cold tap water. The unit is cleaned and ready to brew coffee.
  4. Unplug.

Clogged Needle

hamilton-beach-single-serve-coffee-maker-clogged_needle.png
  1. Unplug and allow to cool.
  2. Remove gray removable needle holder in lid by turning arrow from locked icon (hamilton_beach_flavored_water_dispenser_87320_manual-lock.png) to the unlocked icon (hamilton_beach_flavored_water_dispenser_87320_manual-unlock.png).
  3. Bend a small paper clip. Insert tip of paper clip through hole of the piercing needle and up into shaft of piercing needle to ensure grounds have been removed.
  4. To replace gray removable needle holder, insert tab between lock icon (hamilton_beach_flavored_water_dispenser_87320_manual-lock.png) and unlock icon (hamilton_beach_flavored_water_dispenser_87320_manual-unlock.png) and turn to right to lock.

Troubleshooting

Coffee maker will not brew/coffee not dispensing

  • The piercing needle may be clogged. Always remove gray removable needle holder. Clean piercing needle in lid of coffee maker as shown on page 6.
  • Mineral deposits have formed. Clean coffee maker following directions in Care and Cleaning section.
  • Too little water. Need 6 oz. (177 ml) or more.

Coffee tastes bad

  • Too much water was added or too much or too little ground coffee was added. Change amount of water to coffee grounds or use less water with coffee packs.
  • Poor coffee quality and freshness.
  • Poor water quality (use filtered or bottled water).

Coffee sediment in cup

  • Try a more coarsely ground coffee or add a #1 paper cone coffee filter to brew basket. Make sure hinged lid is closed on removable brew basket.

Water on counter under unit

  • Overfilled water reservoir. Do not add more than 14 ounces (414 ml) of water. 
  • Some mugs/cups do not pour cleanly and can dribble water down side of cup and onto counter.

Coffee overflows from brew basket

  • Use removable brew basket with lid for ground coffee.
  • Use a lesser amount of ground coffee. 3 tablespoons (44 ml) is maximum amount of grounds to brew.
  • When using whole bean coffee, a standard automatic drip coffee grind will yield best results. Be careful not to overgrind, since very finely ground coffee can cause overflow.
  • Black seal around needle in removable needle holder is missing. Carefully place seal around needle and push until in place.

Coffee overflows from mug or travel mug

  • To prevent coffee overflowing from a mug/travel mug, use same mug/travel mug to brew into that was used to fill water reservoir. 
  • Do not add more than 14 ounces (414 ml) of water. There may also be additional water in system that is causing overflow.
  •  Remove brew basket or single-serve pack holder. Press and hold  BREW REG or BREW BOLD button to remove any remaining water.

Water remaining in reservoir

  • Added too much or too little water. Place cup or travel mug on drip tray. 
  • Remove single-serve pack and replace brew basket. Repeat brewing cycle. 
  • Press and hold BREW REG or BREW BOLD button to remove any remaining water.

Coffee single-serve pack bursts

  • There is variability in single-serve pack manufacturing process which causes some types of single-serve packs to be weaker at seams so foil seal fails.
  • Try a different brand.

Brew indicator light flashes:

  • 2 times: Coffee maker needs to be cleaned. 
  • 3 times: Coffee maker lid is not closed properly. Push lid down to lock into place.
  • 7 times: Coffee maker needs to be cleaned. 
  • 8 times: Needle is clogged. Always remove gray removable needle holder and follow “Clogged Needle”.
  • 9 times: Not enough water. Add water to water reservoir.

Limited Warranty

This warranty applies to products purchased and used in the U.S. and Canada. This is the only express warranty for this product and  is in lieu of any other warranty or condition.
This product is warranted to be free from defects in material and workmanship for a period of five (5) years from the date of original purchase in Canada and one (1) year from the date of original purchase in the U.S. During this period, your exclusive remedy is repair or replacement of this product or any component found to be defective, at our option; however, you are responsible for all costs associated with returning the product to us and our returning a product or component under this warranty to you. If the product or component is no longer available, we will replace with a similar one of equal or greater value.
This warranty does not cover glass, filters, wear from normal use, use not in conformity with the printed directions, or damage to the product resulting from accident, alteration, abuse, or misuse. This warranty extends only to the original consumer purchaser or gift recipient. Keep the original sales receipt, as proof of purchase is required to make a warranty claim. This warranty is void if the product is used for other than single-family household use or subjected to any voltage and waveform other than as specified on the rating label (e.g., 120 V ~ 60 Hz).
We exclude all claims for special, incidental, and consequential damages caused by breach of express or implied warranty. All Cliability is limited to the amount of the purchase price. Every implied warranty, including any statutory warranty or condition Cof merchantability or fitness for a particular purpose, is disclaimed except to the extent prohibited by law, in which case such warranty or condition is limited to the duration of this written warranty. This warranty gives you specific legal rights. You may have other legal rights that vary depending on where you live. Some states or provinces do not allow limitations on implied warranties or special, incidental, or consequential damages, so the foregoing limitations may not apply to you.

PDF

WorkForce Inkjet Printer WF-7110

Epic 4 Stroller Travel System 54611770

Leave a Comment

Name

Email

Comment