Introduction

 This is designed to include many superior features that permit you the fullest expression of your cooking skills and enthusiasm. You are now on the threshold of a whole new world of cooking pleasure.

At INALSA, we have a reputation of manufacturing innovative, high-quality appliances such as Food Processors, Mixer Grinders, Juicer Mixer Grinders, Juice Extractors, Cooktops, Microwave Ovens, Oven Toaster Grillers, Hand Blenders, Electric Kettles, Rice Cookers, and Electric Chimneys. Your newly acquired INALSA food processor bears the same distinctive hallmark of excellence.

It is all the result of vigorous quality consciousness in INALSA's design and development where uncompromising standards are maintained and rigid quality control measures are exercised on raw materials, components, and finally, the finished product. Your INALSA food processor has a lot of thoughtful features built in to make your cooking convenient. Please read these instructions carefully, so that you may get the best out of the power-packed features in your INALSA food processor.

Parts Identification

Technical Specifications

Due to continuous improvements in the product, specifications are subject to change without prior notice.

Description

The Inalsa Fiesta Food Processor is designed with the modern home cook in mind. The sleek and compact design takes up minimal counter space, while the easy-to-use controls make it simple to operate. The safety lock system ensures that the food processor can only be operated when the work bowl is properly in place, providing added peace of mind. The Inalsa Fiesta Food Processor is also easy to clean, with removable parts that are dishwasher safe.

How to use

The Bowl 

• With the switch side of the food processor facing you, hold the all-purpose bowl by the handle and lower it onto the power drive shaft of the motor base, ensuring that the serrations given at the bottom of the bowl coincide with the arrow provided on the basic unit. 

• Turn anti-clockwise to lock the lugs on the basic unit, ensure that lugs are properly fitted in the slots provided on the bowl.

  

Blades 

Lower the blade with the center knob onto the power drive shaft and rotate till it rests down. The stainless steel blade and plastic blade settle low down inside, while the disc remains just above the rim of the bowl.

The bowl cover 

• Hold the bowl cover by the feeder tube and place it on the bowl pressing a little towards the left of the bowl's handle, such that serrations given on the bowl cover coincide with the arrow given at the top of the bowl. 
• Slide the bowl cover anti-clockwise until it gets locked in position. For unlocking the bowl cover, turn the bowl cover clockwise by pressing the release button on the top socket. Note: As long as the bowl cover is locked into position, the unit will not switch 'ON'. 
• Connect the food processor to a wall AC outlet. The machine can be switched 'OFF' or 'ON' by shifting the rotary switch to a different position. 

• Now, the food processor is ready for action.

  

Whisker Disc 

• Hold the egg whisker disc with embossed written matter on the top side and insert the holder into the disc. 
• To lock the holder turn anti-clockwise. 
• Fix the bowl over the basic unit and insert the whisker, assembly into the drive shaft till it rests down. 

• Add the food material into the bowl. Lock the bowl cover on the main bowl and start the unit.

  

Liquidizer Jar & Dry grinding jar 

Fit the liquidizer jar or dry grinder or chutney grinder jar on the left-hand side of the basic unit, by opening the top lid, then align the locks with the locking slots and turn anti-clockwise so that the jar locks into the position. Put the ingredients inside the liquidizer jar or dry grinder jar and close the lid. Switch 'ON' the machine. Turn the knob clockwise to the positions 1, 2 & 3 as per requirement.

• Position 1: Low speed
• Position 2: Medium speed
• Position 3: High speed

To use as an incher turn the knob anti-clockwise to the position 'O'. Fill the liquidizer jar up to 3/4 of its capacity and switch 'ON' the unit. Ingredients can be added during operation, by removing the BL stopper provided on the lid. When the operation is over, switch 'OFF the machine and remove the liquidizer jar, dry grinder jar, or chutney jar by turning it clockwise.

Dry grinding 

Once the dry grinder jar properly fits on the basic unit, put the ingredients (minimum up to 3/4") & close the lid. To start with, use pulse & then switch on and move to higher speed for fine grinding. Give a break of a minimum of 1 min. after 3 min. running. Do not run the DG jar without a lid.

Centrifugal juicer 

• Fix the FP bowl on the base. 
• Place the juicer body with the filter onto the drive shaft & rotate the filter till it is locked in position with the body. 
• Align the markings provided on the juicer cover and the F.P. bowl, lower the juicer cover on the bowl, and rotate anti-clockwise to lock it in position. 
• Switch on the unit & drop fruits in the feeder tube. 

• Push down ingredients with the help of a food pusher. The juice will collect in the bowl whereas the pulp accumulates in the juicer body along with the walls of the filter. For best results, prepare small quantities at a time and clean the filter frequently. For cleaning, unlock and remove the filter, and wash it under running water.

  

Disc selection guide

Setup Guide

Setting up the Inalsa Fiesta Food Processor is quick and easy. Simply place the work bowl on the base and secure it in place with the safety lock. Attach the desired blade or attachment, and plug in the food processor. Select the desired speed setting and pulse function using the control panel, and the Inalsa Fiesta Food Processor will do the rest!

Cleaning and Maintenance

Food Processor, Bowl, Cover, Pusher

1. Take out the plug from the power supply. Remove the food pusher from the feeder tube. Then remove the bowl cover (lid) by pressing the black knob & rotating the lid clockwise. Lift off the lid.
2. Disassemble the bowl by holding the handle, turning clockwise, and lifting it off the basic unit.
3. Wash the bowl, lid, and pusher in water and dry it. To remove grease, use warm soapy water and scrub gently with a sponge.

Cleaning and Maintenance of Liquidizer Jar

1. Disassemble the jar by holding the handle turning clockwise, and lifting it off the basic unit.
2. Clean the blade housing and jar with soapy water. After cleaning, invert the jar on the table, insert the rubber washer and blade assembly into the jar, and then fit on the housing & tighten anti-clockwise.

Dry Grinder Jar 

After dry grinding, remove the contents and wipe the jar with a dry cloth before storing.

Food Processor Blades/Discs 

Remove blades carefully from the container or bowl, holding the blade by its knob. Clean blades under running water. Dry blades well before storing.

Pulse Technique Processing of the food should be done in short bursts than continuously this can be done by switching the machine 'ON' and 'OFF' intermittently through the incher switch.

Safety Device: Overload Protector 

The food processor protects the motor against sudden overloads by tripping off automatically. To re-start the machine allow the motor to cool down for two to five minutes. To commence the operation press the red button of the OVERLOAD PROTECTOR located at the bottom of the Basic unit with the finger.

Mouth-Watering Recipes

MOONG DAL DOSA 

Ingredients

• 1 1/3 cup (200gms.) Green gram 
• 1 tbsp, Chopped ginger 
• 3 Chopped green chilies 
• 1 tsp. Salt 
• ½ tsp. Red pepper 
• ½ tsp. Garam masala 
• ½ tsp. Ground cumin seeds 
• 1 tsp. Ground coriander seeds 
• Oil for frying

Method

• Soak green gram for 5 hours. 
• Drain and transfer to food processor bowl. Add ginger, green chilies, a little water, and grind till a smooth paste is formed, The batter should be of pouring consistency. Add seasoning. Mix well. 
• Heat tava. Smear a little oil. Pour a ladleful of batter. Spread to form a thin pancake. Pour a tsp. of oil around and over it. Cook for 2-3 minutes. Turn the other side and cook for a minute or two. 
• Serve with chutney.

HARE MASALE KA GOSHT 

Ingredients

• 450gms. Boneless tender lamb 
• 3 tbsp. (45gms.) Ghee 
• 6 Spring onions 
• 12 Cloves crushed garlic 
• 1" Ginger 
• 50 gms. Coriander leaves 
• 2 Green chilies 
• 50 gms. Mint 
• 1 cup (225ml.) Water 
• ½ tsp. Garam masala 
• 4 tbsp. Basil leaves 
• 4 (200 gms.) Tomatoes 
• ½ cup (140 gms) Curd 
• Vinegar for cooking meat

Method

• Remove fat and cut meat into 1" cubes. Add salt and vinegar. Fry lightly. 
• Place quartered onions in food processor bowl. Chop fine. 
• Fry the chopped onions lightly. Add the meat and fry for 5 minutes. 
• Place garlic, ginger, green chilies, coriander leaves, quartered tomatoes, and mint in the food processor bowl. Chop fine. Add curd. Blend the mixture for 30 seconds. 
• Add this paste and salt to the meat, stir well and add water. Cover and cook on a slow fire stirring occasionally, for about ½ hours or till the water dries up. If the meat is not tender add more water and continue to cook. 
• Serve garnished with garam masala and chopped mint, basil, and coriander leaves.

Important Instructions

Do's

1. Before connecting the appliance check the mains voltage comply with the voltage specified.
2. Place your food processor at a convenient height so that you can operate it easily. You should be able to look down into the attachments to check the circulation of the ingredients.
3. Clear out some space around the machine and keep the food processor away from direct heat and sun.
4. Take care as the cutting edges of the blade cutters are very sharp.
5. Ensure that the bowl assembly is perfectly locked with the basic unit.
6. For unlocking the bowl cover turn the bowl cover clockwise by pressing the release switch on the upper base.
7. While using different jars, fix the bowl and bowl cover as the machine will not work till the bowl cover is in place.
8. While using a centrifugal juicer place the juicer body with a filter onto the drive shaft and rotate the filter till it is locked with the body.
9. Always use a spatula during the processing of the food.
10. Keep the food processor away from the reach of children.

Don'ts

1. Do not apply undue pressure while using the coconut shredding disc.
2. Do not operate the centrifugal juicer unless the juicer cover, and filter is properly clamped with the juicer body.
3. Do not leave the food processor in running condition unattended.
4. Do not touch the moving parts during operation as they revolve at extremely high speeds and may cause injury.
5. Never allow the shredded, sliced, or chipped food to touch the discs during operation. It could force the disc upwards and cause damage. If the bowl begins to fill, empty it out in between.
6. Do not use fruits such as bananas & peaches which produce a thick paste that can clog the juicer filter.
7. Do not feed larger-sized fruits into the feeder tube by force. This can overload the motor and the juicer filter may get unbalanced.
8. Never lay a thin plastic sheet or cloth under the basic unit. It may get sucked up and block the ventilation holes in the base.
9. For juicing do not allow the cord to hang over the edges of the table, or touch hot surfaces.
10. Do not push food into the feeder table by fingers while it is in operation. If fruit becomes clogged in the feeder tube, use a pusher to push it down. If it doesn’t work turn off the motor, unplug the unit, then disassemble the food processor to remove the remaining food.
11. Do not immerse the appliance in water.
12. Do not attempt to repair the food processor at home or allow any unauthorized person to do it either. In the event of any service problem, please call your nearest service center.

Before First Use

1. After unpacking the unit and before any use, make sure the mechanical parts of the unit and all its attachments are not damaged.
2. Wash the parts of the processor, especially those that will come into contact with the fruits.
3. Carefully go through the instruction manual before starting the operation.

Important Instructions

Some parts of the food processor are oiled & greased for the smooth operation of the machine, before first use, wash the parts of the processor thoroughly with soapy water. While grinding in dry grinding and chutney jar, customers are advised to keep one hand on the jar lid to avoid the lid from flying.

Troubleshooting

If you experience any issues with your Inalsa Fiesta Food Processor, try the following troubleshooting steps:

• If the food processor is not turning on, check that it is properly plugged in and that the safety lock is engaged.
• If the food processor is not processing food properly, check that the blades are securely attached and that the work bowl is properly in place.
• If the food processor is making strange noises, turn it off immediately and check for any obstructions or damage to the blades or work bowl.

Pros & Cons

Pros

• Powerful 700-watt motor
• Sharp stainless steel blades
• Large 12-cup capacity work bowl
• Range of attachments included
• Sleek and compact design

Cons

• Higher price point compared to some other food processors
• Some users may find the control panel confusing

Customer Reviews

Customers who have purchased the Inalsa Fiesta Food Processor have praised its power and versatility, with many noting that it has significantly reduced the time they spend on meal preparation. However, some users have noted that the food processor can be noisy and that the control panel can be difficult to use.