Introduction

The Levoit True HEPA Air Purifier LAP-C201S-AUSR is a powerful air purification solution designed to improve indoor air quality in spaces up to 178 square feet. Featuring a three-stage filtration system, including a nylon pre-filter and an H13 True HEPA filter, it captures 99.97% of airborne particles as small as 0.3 microns, such as dust, pollen, and pet dander. With a sleek design and quiet operation, it seamlessly fits into any home environment. Priced at $99.99, this air purifier is an essential tool for maintaining a healthy living space.

Package Contents

• 1 x Smart Air Purifier
• 1 x True HEPA Filter (Pre-Installed)
• 1 x User Manual
• 1 x Quick Start Guide

Specifications

CONTROLS 

On/Off Button 

• Turn the air purifier on/off. 
• Press and hold to configure the air purifier. See the VeSync in-app instructions for more information. 

WiFi Indicator 

• Turns on, off, or blinks to indicate configuration status. See the VeSync in-app instructions for more information. 

Fan Speed Button 

• Cycles through fan speeds: I (low). II (medium) III (high). 
• Tapping the Fan Speed Button while the air purifier is in Sleep Mode will exit Sleep Mode. 

Sleep Mode Button 

• Turns Sleep Mode on.
• Press and hold for 3 seconds to reset the Check Filter Indicator. 

Timer Button 

• Cycles through timer options.

Night Light Button 

• Turns the night light on/off.

Display Off Button 

• Turns the display off (not including the night light). 
• Tap any button (except ) to turn the display back on. 

Display Lock Button 

• Prevents current settings from being changed.
• Blinks when any other button is tapped to indicate that Display Lock is on. 

Check Filter Indicator 

• Lights up when the filter should be checked.
• Reset the Check Filter Indicator light by pressing and holding the Sleep Mode button for 3 seconds. 

GETTING STARTED 

1. Flip the air purifier over. Twist the filter cover counterclockwise and remove it. [Figure 1.1] 
2. Remove the filter from its plastic packaging and place the filter back into the air purifier. [Figure 1.2] 
3. Replace the filter cover and twist clockwise to lock. {Figure 1.3] 

4. Place the air purifier on a flat, stable surface with the display facing up. Allow at least 15 in/ 38 cm of clearance on all sides of the air purifier. Keep away from anything that would block airflow, such as curtains. {Figure 1.4] 

   

VESYNC APP SETUP 

1. To download the VeSync app, scan the OR code or search "VeSync" in the Apple App Store or Google Play Store. 
2. Open the VeSync app. Log In or  Sign Up.

3. Follow the in-app instructions to set up your smart air purifier.

   

    

Note: 

To disconnect the Wi-Fi, press and hold the On/Off button for 15 seconds until the Wi-Fi indicator turns off. This will restore the smart air purifier's default settings and disconnect it from the VeSync opp. To reconnect, please follow the instructions in the VeSync opp for adding a device. 

CONNECT WITH AMAZON ALEXA OR GOOGLE ASSISTANT
You can use the VeSync app to connect your smart air purifier to Amazon Alexa or Google Assistant™. Please follow the in-app instructions to set up your voice assistant. 

Note: You must create your own VeSync account to access voice assistants. 

Description

The Levoit True HEPA Air Purifier LAP-C201S-AUSR is engineered with a sleek and compact design, making it perfect for bedrooms, living rooms, or offices. The 3-stage filtration system ensures comprehensive air cleaning by removing dust, pollen, pet dander, smoke, and other airborne pollutants. The air quality indicator provides real-time feedback on the air quality in your room, adjusting the fan speed accordingly. The night light feature adds a touch of comfort and visibility in dark environments.

USING YOUR SMART AIR PURIFIER 

Note: Using the VeSync opp allows you to control your air purifier remotely and access additional functions and features. 

General Operation 

1. Plug in and tap to turn on the air purifier. The fan will start on level I. [Figure 2.1] 

   

2. Optionally, tap to change fan speed between I, II , III.
   Note: 
   • The indicators ore not buttons and cannot be used to change the fan speed. 
   • The fan speed indicators will light up when active. 
   • Fon speed Ill is the loudest, but cleans air the quickest. 
   • For best results. or to address a specific air quality issue such as smoke, run the air purifier at high speed (level 1/lj for 15-20 minutes before using a lower speed. 
   • To effectively clean air, keep windows and doors closed while the air purifier is on. 
3. Tap to turn off the air purifier. 

Sleep Mode 

After you tap Sleep Mode, the display will be completely turned off within 6 seconds. And the air purifier operates quietly by using a fan speed lower than fan speed I. 
Press any button (except ) to wake up the display. 

Note: 

• Topping will exit Sleep Mode. 
• You can still adjust the night light while the air purifier is in Sleep Mode. 

Timer 
You can manually set a timer for 2, 4, or 8 hours using the display buttons. You can also set a timer for 1 to 24 hours through the VeSync app. 

1. Tap repeatedly to select a time. The timer will start automatically.
   Note:
   • The indicators ore not buttons and cannot be used to select a time.
   • The timer indicators will light up blue when active.
   • indicator lights up when a timer is set up through the opp.
2. Once the timer has finished, the air purifier will turn off.
3. To cancel a timer, tap until all timer indicators are off.

Note:

• You can change the fan speed at any time while the timer is on.
• The timer will restart if the time is changed.

Night Light 
You can choose between 2 night light brightness levels, even when the air purifier is turned off (as long as it is still plugged in). 

1. Tap once to turn on the light. 
2. Tap a second time to dim the brightness to half. 
3. Tap a third time to turn off the light. 

Note: Turning off the display will not turn off the night light. 

Display Lock 
Locking the display prevents settings from being accidentally changed. Buttons will not respond to being tapped. 

1. Press and hold for 3 seconds to lock/unlock the display. 
2. While the display is locked, will light up. If other buttons are tapped, will blink 3 times. 

Memory Function 

• Even while turned off, as long as the air purifier is plugged in, it will remember its previous fan speed, Sleep Mode, and Display Lock settings. 
• When unplugged, the air purifier will remember the fan speed and Sleep Mode, but not Display Lock or Display Off. 

Note: The memory function does not work with timers or night light settings. 

VESYNC APP FUNCTIONS 

The VeSync app allows you to access additional smart air purifier functions, including those listed below. As the app develops, more features may become available. 
Remote Control 

Change any air purifier settings through the app, even while the Display Lock is on. 

Schedules 

Create and customize schedules for your air purifier to match your routines. 

Timer Function 

Set a timer setting between 1 and 24 hours. 

Filter Replacement Info 

• Keep tabs on the remaining filter life by checking the filter life percentage in the app. 
• Shop for replacement filters. 

ABOUT THE FILTER 

The air purifier uses a 3-stage filtration system to purify air. 

1. Nylon Pre-Filter
   Captures large particles such as dust, lint, fibers, hair, and pet fur.
   Maximizes the filter's life by protecting it.
2. H13 True HEPA FIiter
   Captures at least 99.97% of airborne particles 0.3 microns (μm) in size. , Filters small particles such as fine dust, smoke particles, and allergens such as pollen and pet dander.
3. High-Efficiency Activated
   Carbon Filter
   Physically adsorbs smoke, odors, and fumes.
   Filters compounds such as formaldehyde, benzene, ammonia, hydrogen sulfide and volatile organic compounds (VOCs).

Note: Levoit air purifiers filter airborne particles 0.3 microns in size. Arovast Corporation makes no claims that this air purifier helps reduce the COVID-19 virus.

Clean Air Delivery Rate 
This air purifier has a Clean Air Delivery Rate of 118 cubic feet per minute (CFM). or 200.6 m3/h. 
Clean Air Delivery Rate (CADR) measures the efficiency of an air purifier by indicating the volume of clean air that it produces per minute. This is based on the removal of dust, pollen, and smoke, which are the 3 most common indoor air pollutants. The higher the CADR, the more particles the air purifier will remove and the larger the area it can clean. The rating is measured at the air purifier's highest speed. 

Air Change per Hour 
The air change rate is how many times all of the air in a room can be purified (or  "changed") by the air purifier in 1 hour. Air changes per hour are calculated on the recommended room size, assuming 8 ft I 2.4 m ceilings. For smaller rooms, the  air change per hour will increase. This air purifier has an air change per hour of 5, which means it can change air 5 times per hour at the max speed in a single,  closed room up to 183 ft2 / 17 m2. 

The air purifier is effective for larger rooms, but air purification will take longer, with fewer air changes per hour. 

Humidity 
Moisture may damage the filters. This air purifier should be used in an area with a humidity level below 85% RH. If you use the air purifier in excessively humid areas, the surface of the filter will become moldy. 

Note: Water or moisture will allow mold to grow. To solve a mold problem, get rid of the source of the moisture and clean up the mold. 

Essential Oils 
Do not add essential oils to the air purifier or filter. The filter will become damaged by the oil and will eventually release an unpleasant smell. Do not use diffusers near the air purifier. 

Setup Guide

To set up the Levoit True HEPA Air Purifier, follow these steps:

1. Unbox the air purifier and all included accessories.
2. Remove the plastic wrap from the filters.
3. Insert the filters into the air purifier according to the instructions.
4. Plug in the device and turn it on.
5. Use the remote control or buttons on the device to adjust settings such as fan speed, timer, and night light.

CARE & MAINTENANCE 

Cleaning the Smart Air Purifier 

• Unplug before cleaning. 
  Wipe the outside of the air purifier with a soft, dry cloth. If necessary, wipe the housing with a damp cloth, then immediately dry. 
  Vacuum the inside of the air purifier. 
• Do not clean with abrasive chemicals or flammable cleaning agents. 

Check Filter Indicator 

  will light up as a reminder to check the filter. Depending on how often you use the air purifier, the indicator should turn on within  6-8 months. You may not need to replace your filter yet, but you should check it when turns on. 

Cleaning the Filter 

The outer pre-filter should be cleaned every 2-4 weeks to increase efficiency and extend the life of your filter. Clean the pre-filter using a soft brush or vacuum hose to remove hair, dust, and large particles. Do not clean the filter with water or other liquids. [Figure 3.1] 

Resetting the Check Filter Indicator 

Reset the Check Filter Indicator when: 

• lights up red. 
  • Replace the filter.
  • Turn on the air purifier. 
  • Press and holdfor 3 seconds. 
    will blink 3 times and turn off once successfully reset. 
• The filter was changed before lit up. 
  Press and holdfor 3 seconds.   will blink 3 times and turn off once successfully reset. 

Note: You can also reset the Check Filter Indicator in the VeSync opp. 

When Should I Replace the  Filter? 
Check the VeSync app to see your remaining filter life. 
The filter should be replaced every  6-8 months. You may need to replace your filter sooner or later depending on how often you use your air purifier. Using your air purifier in an environment with relatively high pollution may mean you will need to replace the filter more often, even if is off. 
You may need to replace your filter if you notice: 

• Increased noise when the air purifier is on 
• Decreased airflow 
• Unusual odors 
• A visibly clogged filter 

Note: 

• To maintain the performance of your air purifier, only use official Levoit filters. 
• Remember to reset after changing the filter.

Replacing the Filter 

1. Unplug the air purifier. Flip the air purifier over and remove the filter cover.
2. Remove the old filter. 
3. Clean out any remaining dust or hair inside the air purifier using a vacuum hose. Do not use water or liquids to clean the air purifier. [Figure 3.2] 
4. Unwrap the new filter and place it into the housing.
5. Replace the cover. Plug in the air purifier. 

6. Reset the Check Filter Indicator.

   

Storage 
If not using the air purifier for an extended period of time, wrap both the air purifier and the filter in plastic packaging and store in a dry place to avoid moisture damage. 

TROUBLESHOOTING 

My smart air purifier isn't connecting to the VeSync app.

• Make sure your phone has Bluetooth turned on and is not currently connected to another Bluetooth device.
• During the setup process, you must be on a secure 2.4GHz WiFi network. Confirm that the network is working correctly.
• Make sure the WiFi password you entered is correct.
  • There should be no spaces at the beginning or end of the password.
  • Test the password by connecting a different electronic device to the router.
  • If you're manually typing in the SSID and password, double check that both are entered correctly.
• Try moving your air purifier closer to the router. Your phone should be as close as possible to your air purifier.
• Your router may need to be at a higher location, away from obstructions.
• Make sure your air purifier and router are away from appliances (such as microwave ovens, refrigerators, electronic devices, etc.) to avoid signal interference.
• If you're using a VPN, make sure it's turned off while setting up your air purifier.
• Disable portal authentication for your WiFi network. If portal authentication is enabled, the air purifier will not be able to access your WiFi network, and setup will fail.

Note: Portal authentication means that you need to sign in to your WiFi network through a web page before you can use the Internet.

My air purifier is offline.

• Make sure the air purifier is plugged in and has power, then refresh the VeSync menu by swiping down on the screen.
• Make sure your router is connected to the internet and your phone's network connection is working.
• Delete the offline air purifier from the VeSync app. Swipe left (iOS) or press and hold (Android), then tap Delete.
• Reconfigure the air purifier with the VeSync app.

Note: Power outages, internet outages, or changing WiFi routers may cause the air purifier to go offline.

Warranty

Arovast Corporation ("Arovast") warrants this product to the original purchaser to be free from defects i n material and workmanship, under normal use and cond itions, for a period of 2 years from the date of original purchase.

Pros & Cons

Pros

• Efficacious in removing airborne pollutants.
• Quiet operation and night light feature.
• Real-time air quality monitoring.
• Compact and stylish design.
• Affordable price point.

Cons

• Filter replacement can be costly over time.
• Limited coverage area compared to larger models.
• No built-in ionizer or UV light.

Customer Reviews

Customers have praised the Levoit True HEPA Air Purifier for its effectiveness in improving air quality and reducing allergy symptoms. Many appreciate its quiet operation and the convenience of the remote control. However, some users have noted that the filter replacement cost can add up over time.