How to Use: Lockly Secure / Secure Plus / Secure Pro Deadbolt Edition User Manual

Lockly Secure / Secure Plus / Secure Pro Deadbolt Edition: Complete Product Manual

Lockly Secure / Secure Plus / Secure Pro Deadbolt Edition is a family of smart deadbolt locks designed for homeowners who want keyless entry, biometric access, app-based control, and dependable physical backup. Built for entry doors, these models combine a patented anti-peep keypad, fingerprint unlocking, Bluetooth and Wi-Fi options, auto-locking, and emergency mechanical key access in one modern security package.

This product line is a strong fit for families, rental hosts, frequent travelers, and anyone upgrading from a standard deadbolt to a smarter access system. The Deadbolt Edition is especially appealing because it includes a rekeyable 6-pin cylinder, making it easier to match existing security needs without replacing the entire lock. Depending on the model and bundle, typical pricing ranges from about $249.99 to $349.99, with some variants and promotions available below or above that range. Availability is generally strong through Lockly’s official store, major retailers, and hardware partners.

What sets the lockly Secure / Secure Plus / Secure Pro Deadbolt Edition apart is its blend of convenience and security. Users get multiple unlock methods, fast installation on many standard doors, and smart-home compatibility on supported versions. It is built for everyday reliability, from morning rush exits to guest access management and remote monitoring. For buyers comparing smart deadbolts, this series stands out for its fingerprint access, offline code support, and practical backup options that keep the door usable even when connectivity is limited.

Specifications and Key Features

• Lock type: smart deadbolt with keypad, fingerprint access, app control, and physical key backup
• Edition: Deadbolt Edition with rekeyable 6-pin cylinder
• Power: 4 AA alkaline batteries included
• Connectivity: Bluetooth on core models; Wi-Fi available via included hub on many bundles
• Access methods: PIN codes, fingerprint, phone app, offline access codes, physical keys
• Security features: auto-lock, tamper-resistant design, anti-peep PIN entry, door sensor support on some packages
• Door fit: 1 3/8 in to 2 in thick doors, with adjustable backset for 2 3/8 in or 2 3/4 in
• Bore size: 2 1/8 in standard door prep
• Deadbolt projection: 1 in
• Exterior assembly rating: IP54 on supported versions
• Included accessories: strike plate, mounting hardware, keys, batteries, and installation materials

In practical use, this series competes with mainstream smart deadbolts from brands like Schlage, Yale, and Kwikset, but it leans harder into biometric entry and keypad privacy. The Secure Pro is the most feature-rich option in the lineup, while Secure Plus often offers a strong balance of value and smart access features.

Setup Guide: How to Install and Pair Lockly Secure Deadbolt Edition

Start by removing your existing deadbolt and confirming that your door meets the size requirements. Check the door thickness, bore hole, and backset before you begin. The lockly Secure / Secure Plus / Secure Pro Deadbolt Edition is designed for standard entry doors, but a poor fit can cause alignment issues later.

• Install the exterior keypad and interior assembly according to the included parts layout.
• Attach the deadbolt mechanism and make sure the bolt moves smoothly by hand before tightening hardware.
• Insert the four AA batteries only after the lock body is secured.
• Complete the initial calibration so the lock learns the open and closed positions.
• Use the mobile app to register fingerprints, create PIN codes, and enable administrator access.
• If your bundle includes Wi-Fi, pair the lock to the hub before enabling remote access or voice features.

For best results, test the lock several times with the door open before fully closing it. If the keypad does not respond, verify battery orientation and contact alignment. Safety tip: do not leave the door unsecured during installation, and keep physical keys nearby until setup is confirmed. If the bolt binds, loosen the mounting screws slightly and realign the strike plate.

Troubleshooting Common Problems and Fixes

Most issues with the lockly Secure / Secure Plus / Secure Pro Deadbolt Edition are related to alignment, power, or pairing rather than hardware failure. If the lock does not respond, start with the batteries and make sure they are fresh and correctly installed. Low power can cause slow keypad response, failed fingerprint reads, and incomplete locking cycles.

• Problem: keypad not lighting up. Solution: replace batteries and confirm the battery tray is fully seated.
• Problem: bolt sticks or jams. Solution: check door alignment, strike plate position, and screw tightness.
• Problem: fingerprint fails repeatedly. Solution: clean the sensor and re-enroll the fingerprint from multiple angles.
• Problem: app cannot connect. Solution: verify Bluetooth is enabled, then re-pair the lock and hub if applicable.
• Problem: remote access not working. Solution: confirm Wi-Fi hub placement and home network connection.

If a lock error appears during setup, restart the lock by removing and reinserting the batteries, then repeat calibration. To prevent recurring issues, keep the sensor clean, replace batteries before they are critically low, and avoid forcing the deadbolt. Support is available through Lockly’s customer service team, with installation and product assistance offered during published business hours. Warranty coverage and replacement options may vary by retailer and region, so keep proof of purchase and serial information ready when contacting support.

Pros and Cons of the Lockly Secure Deadbolt Series

Pros

• Multiple entry methods provide excellent convenience for families and guests
• Fingerprint access is fast and reduces reliance on codes or keys
• Deadbolt Edition includes a rekeyable 6-pin cylinder for added flexibility
• Offline access codes help maintain entry even when the network is unavailable
• Strong value for users who want biometric security without going fully premium

Cons

• Wi-Fi features may require an extra hub depending on the package
• Fingerprint performance can vary if the sensor is dirty or fingers are wet
• Installation is straightforward, but door alignment must be precise
• App and smart-home features are useful, but not every bundle includes them equally

Compared with simpler smart deadbolts, this lineup offers more access options and stronger everyday versatility. Compared with higher-end premium locks, it delivers solid features at a more approachable price, especially for buyers who want biometric entry without overpaying.

Customer Reviews and Real-World Feedback

Owners frequently rate the Lockly Secure series between 4 and 5 stars for convenience, fingerprint speed, and easy everyday use. Many users praise the ability to unlock the door without searching for keys, especially for kids, guests, and delivery access. Reviewers often mention that the keypad is easy to use and the lock feels modern and secure.

Common complaints focus on Wi-Fi setup, occasional fingerprint misses, and the need for careful installation alignment. A typical testimonial is: “Once installed correctly, it works great and makes entry much easier.” Another common sentiment is: “The fingerprint reader is fast, but battery life and door alignment matter a lot.”

For most buyers, the lockly Secure / Secure Plus / Secure Pro Deadbolt Edition is a smart purchase if biometric access, code management, and backup key support are priorities. It is especially recommended for homes, rentals, and busy households that want a flexible smart lock with practical security features.