Mrcool Universal DC Inverter MDUO18048 User Manual

cover-image

Content

Introduction

The MRCOOL Universal DC Inverter MDUO18048 is a versatile and efficient heat pump system designed for residential heating and cooling needs. Offering a cooling and heating capacity of 48,000 BTUs, this unit operates quietly and efficiently, achieving up to 18 SEER and 10.5 HSPF ratings.  The system is priced at approximately $2,555. Its advanced inverter technology allows for variable speed operation, optimizing energy use and comfort.

Specifications

  • SEER Rating: Up to 22 SEER
  • HSPF Rating: Up to 10 HSPF
  • Cooling Capacity: 18,000 BTU
  • Heating Capacity: 18,000 BTU
  • Dehumidification: Up to 2.5 pints per hour
  • Noise Level: As low as 25 dB
  • Smart Sensors: Built-in temperature and humidity sensors
  • Remote Control: Wireless remote control with scheduling capabilities
  • Wi-Fi Connectivity: Compatible with smart home systems

Safety Precautions

Read Before Installation 
Incorrect installation may cause serious damage or injury.
The seriousness of potential damage or injuries is classified as either a WARNING or CAUTION.

WARNING: This symbol indicates ignoring instructions may cause death or serious injury.

CAUTION: This symbol indicates that ignoring instructions may cause moderate injury to your person, damage to your unit, or other property.

DANGER: This symbol indicates that you should never perform the indicated action. 

WARNING

Please read the manual in its entirety before installing, operating or repairing.

  • DO NOT share the electrical circuit with other appliances. Improper or insufficient power supply can cause fire or electrical shock.
  • When connecting refrigerant piping, DO NOT let substances or gases other than the refrigerant enter the unit. The presence of other gases or substances will lower the unit’s capacity, and may cause abnormally high pressure in the operation cycle. This may cause explosion and injury.
  • DO NOT connect the ground wire to a gas pipe, water pipe, lightning arrester or telephone wire.
  • DO NOT allow children to play with the air conditioner. Children should be supervised around the unit at all times.
  • DO NOT alter the settings of the pressure sensor or other protective devices; if short-circuited or modified, fire or even an explosion could occur.
  1. Installation must be performed by an authorized technician. Improper installation may cause water leakage, electrical shock, or fire.
  2. Installation must be performed according to installation instructions. Improper installation may cause water leakage, electrical shock, or fire.
  3. In North America, installation must be performed in accordance with the requirement of NEC and CEC (by authorized personnel only.) Contact an authorized service technician for repair or maintenance of the unit.
  4. Only use the included accessories and specified parts for installation. Using non-standard parts can cause water leakage, electric shock, or fire and may cause the unit to fail.

Description

The mrcool Universal DC Inverter MDUO18048 boasts a sleek and compact design, making it an aesthetically pleasing addition to any room. The unit features a high-efficiency DC inverter compressor that adjusts its speed according to the cooling or heating demands, ensuring minimal energy waste. The air handler is equipped with a multi-stage filtration system, enhancing indoor air quality by capturing dust, pollen, and other allergens.

The system also includes advanced features like auto-restart after power outages and a self-diagnostic function to identify potential issues promptly. The exterior unit is designed with durability in mind, featuring a rust-resistant coating to withstand various environmental conditions.

Appliance Overview

Please read this manual carefully before installation and operation of the Univeral™ Series Central HVAC System to ensure corect use and handling. In addition to the safety precautions in the previous section, please adhere to the following guidelines and note our exceptions to liability.

  1. This appliance can be used by children aged 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children should not play with the appliance. Cleaning and user maintenance should not be made by children without supervision.
  2. To ensure product reliability, the unit may consume power under stand-by status to maintain normal communication, and for preheating refrigerant and lubricant. If the unit will not be used for an extended period, disconnect the power supply. Reconnect the power supply and preheat the unit prior to use.
  3. Ensure you have selected the proper model for the operating environment. Improper selection may impact operating performance.
  4. This product has undergone strict inspection and operational testing before leaving the factory. To avoid damage due to improper disassembly, which may impact the normal operation, please do not disassemble the unit without proper training and equipment.
  5. For technical assistance, please contact MRCOOL
  6. When the product is malfunctioning and/or is inoperable, please contact MRCOOL technical support at the aforementioned number, as soon as possible and provide the following information:
    1. Product Nameplate Contents (model number, cooling/heating capacity, product serial number, factory date)
    2. Nature of Malfunction (specify the circumstances before and after the error occurred)
  7. All illustrations and information in the instruction manual are for reference only. In order to improve the product , we will continuously assess and innovate. We retain the right to make necessary revisions to the product from time to time. We reserve the right to revise the contents of this manual without notice.
  8. If the supply cord is damaged, it must be replaced by MRCOOL, a professional service agent or similarly qualified person in order to avoid damage to the product.
  9. MRCOOL, LLC assumes no responsibility for personal injury, property loss or equipment damage caused by improper installation and commissioning, unecessary maintenance, or failure to follow relevant federal and state regulations, industrial standards, and the requirements of this instuction manual.
  10. MRCOOL, LLC will bear no responsibilities for personal injury or property damage caused by the following:
    1. Improper use of the appliance
    2. Altering, maintaining, or operating the product with non-approved equipment.
    3. Altering, maintaining, or operating the product outside of the guidelines of this manual.
    4. Defects caused by corrosive gas.
    5. Defects caused by shipping damage.
    6. Failure to abide by this instruction manual or government regulations.
    7. Products made by other manufacturers
    8. Natural disasters, improper installation environment, or force majeure.
appliance_overview_mrcool_universal_dc_inverter_mduo18048.png

Unless otherwise stated (as “OPTIONAL”) the air conditioning system includes the following accessories. Use all of the installation parts and accessories to install the air conditioner. Improper installation may result in water leakage, electrical shock, fire, or equipment failure.

Operating Range

COOLING

HEATING

 

OutdoorTemperature

 

5°F(-15°C) ~ 118°F (48°C

 

-22°F(-30°C) ~ 75°F (24°C)

Unit Dimensions

MDUO18060

unit_dimensions_mrcool_universal_dc_inverter_mduo18048.png

Outdoor Unit Dimensions                               Mounting Dimensions

Width (A) x Height (C) x Depth(G)                           Width (A / D)                Depth (B / E)

MDUO18048/           42-3/4 x 53-3/4x 14-1/2 in.

MDUO18060            1085 x 1365 x 370 mm

42-3/4 / 24-1/2 in.

1085 / 620 mm

16-7/8 / 15-1/2 in.

427 / 395 mm

Installation Location

WARNING

  1. The unit must be installed in a location strong enough to support the weight of the unit and fixed securely, to avoid toppling.
  2. Install the appliance in a location where the inclination is less than 5°.
  3. Do not install the unit in a location with direct sunlight.
  4. Do not install the unit where combustible gas leakage may occur.

Intsructions

  1. Select an installation location for outdoor unit pursuant to the following conditions:
  2. Noise and air flow produced by the outdoor unit will not disturb neighbors.
  3. The location is away from animals and plants. If not, please add safety fences to protect the unit. The area is well-ventilated with no nearby obstacles that could obstruct air flow.
  4. The location is able to support the weight and withstand the operating vibration of the unit. Installation is able to be performed safely.
  5. The location area is free of combustible or corrosive gas, and oil smoke.
  6. Unit is able to be shielded from strong wind. Strong wind may affect the outdoor fan and lead to insufficient air flow volume, thus affecting performance.
  7. Unit is away from objects which can generate or amplify noise during operation.
  8. Condensate can be safely drained from the unit.

For best performance of the outdoor unit, make sure its installation space conforms to the following installation dimensions...
For installation of a single condenser refer to fig 2.1 below:

installation_location.png

A ~ E

Hb         Hd         H

inches (”) millimeters (mm)

a

b

c

d

e

B

 

≥ 3.94”

100mm

   

A,B,C,

≥ 11.81”

300mm

≥ 3.94”

100mm

≥ 3.94”

100mm

  

B,E

 

≥ 3.94”

100mm

  

≥ 39.37”

1000mm

A,B,C,E

≥ 11.81”

300mm

≥ 5.9”

150mm

≥ 5.9”

150mm

 

≥ 39.37”

1000mm

D

   

≥ 39.37”

1000mm

 

D,E

   

≥ 39.37”

1000mm

≥ 39.37”

1000mm

B,D

Hb < Hd

Hd > H

 

≥ 3.94”

100mm

 

≥ 39.37”

1000mm

 

Hb >Hd

Hd < H

 

≥ 3.94”

100mm

 

≥ 39.37”

1000mm

 

 

 

B,D,E

 

Hb < Hd

Hb ≤ 1/2H

 

≥ 9.84”

250mm

 

≥ 78.74”

2000mm

≥ 39.37”

1000mm

1/2H <Hb ≤ H

 

≥ 9.84”

250mm

 

≥ 78.74”

2000mm

≥ 39.37”

1000mm

Hb > H

Prohibited

 

Hb > Hd

Hd ≤ 1/2H

 

≥ 3.94”

100mm

 

≥ 78.74”

2000mm

≥ 39.37”

1000mm

1/2H < Hd ≤ H

 

≥ 7.87”

200mm

 

≥ 78.74”

2000mm

≥ 39.37”

1000mm

Hd > H

Prohibited

For best performance of the outdoor unit, make sure its installation space conforms to the following installation dimensions...
For installation of multiple condensers side by side refer to fig 2.2 below:

installation_location_of.png

A ~ E

Hb         Hd         H

inches (”) millimeters (mm)

a

b

c

d

e

       
       

A,B,C,

≥ 11.81”

300mm

≥ 11.81”

300mm

≥ 39.37”

1000mm

  

A,B,C,E

≥ 11.81”

300mm

≥ 11.81”

300mm

≥ 39.37”

1000mm

 

≥ 39.37”

1000mm

D

   

≥ 78.74”

2000mm

 

D,E

   

≥ 78.74”

2000mm

≥ 39.37”

1000mm

B,D

Hb < Hd

Hd > H

 

≥ 11.81”

300mm

 

≥ 78.74”

2000mm

 

Hb >Hd

Hd ≤ 1/2H

 

≥ 9.84”

250mm

 

≥ 78.74”

2000mm

 

Hd < H

 

≥ 11.81”

300mm

 

≥ 98.43”

2500mm

 

 

 

B,D,E

 

Hb < Hd

Hb ≤ 1/2H

 

≥ 11.81”

300mm

 

≥ 78.74”

2000mm

≥ 39.37”

1000mm

1/2H <Hb ≤ H

 

≥ 11.81”

300mm

 

≥ 98.43”

2500mm

≥ 39.37”

1000mm

Hb >H

Prohibited

 

Hb > Hd

Hd ≤ 1/2H

 

≥ 9.84”

250mm

 

≥ 98.43”

2500mm

≥ 39.37”

1000mm

1/2H < Hd ≤ H

 

≥ 11.81”

300mm

 

≥ 98.43”

2500mm

≥ 39.37”

1000mm

Hd > H

Prohibited

For best performance of the outdoor unit, make sure its installation space conforms to the following installation dimensions...
For installation of multiple condensers in rows refer to fig 2.3 below:

installation_location_of_the.png

Hb        H

inches (”) millimeters (mm)

Hb ≤ 1/2H

B ≥ 9.84” 250mm

1/2H <Hb ≤ H

B ≥ 11.81” 300mm

Hb > H

Prohibited

For best performance of the outdoor unit, make sure its installation space conforms to the following installation dimensions...
For installation of multiple condensers on a vertical face refer to fig 2.4 below:

for_installation_of_multiple_condensers.png

Outdoor Unit Installation

  1. If the outdoor unit is installed on a solid surface such as concrete, use M10 screw bolts and nuts to secure the unit. Make sure the unit stands erect and level.
  2. Do not install it on top of a building.
  3. If the unit vibrates and generates noise, add rubber cushions between the unit’s feet and the installation surface.
  4. When the outdoor unit is in heating or defrosting mode, it must drain water. When installing the drain pipe, plug the accompanied drainage connector to the drainage hole on the chassis of the outdoor unit. Then, connect the drain hose to the drainage connector. If the drainage connector is used, the outdoor unit should be at least 10cm from the ground.
  5. Plugs and drainage connector are not recommended if there is an electrical heater on the chassis. 
    Refer to Fig. 2.5 for details.

    outdoor_unit_installation.png

MRCOOL Universal DC Inverter MDUO18048 Maintenance

Troubleshooting

(1) If your air conditioner fails to function normally, check the following items before conducting maintenance:

Problem

Cause

Corrective Measure

 

 

 

 

 

The air conditioner will not activate.

If you turn off the unit and then immediately turnit on, in order to protect  the compressor and avoid system overload, compressor will delayrunning fo 3 minutes.

 

 

Please wait for approx. 3 minutes.

Wire connection is wrong.

Connect wires according to the wiring diagram.

Fuse or circuit breaker is broken.

Replace the fuseor switch on the circuit breaker.

Power failure.

Restart after power returns.

Power plug is loose.

Re-insert thepower plug.

Remote control has low battery.

Replace the batteries.

 

 

 

 

 

Inadequate cooling or heating performance

Air inlet andoutlet of theunits have been blocked.

Clear the obstacles and keep the area  well ventilated.

Improper temperature setting.

Reset to a proper temperature.

Fan speed is too low.

Reset to a proper fan speed.

Air flow direction is incorrect.

Change the direction of air louvers.

Doors or windowsare open.

Close them.

Exposed under direct sun light.

Put on curtains or louvers in front of the  windows.

Too many heat sources in the room.

Remove unnecessary heat sources.

Filter is blocked or dirty.

Have a professional clean the nlter.

Air inlet andoutlet of theunits have been blocked.

Clear the obstacles and keep the area  well ventilated.

Mist comes from the conditioner.

 

During operation.

If theunit is running under high humidity, the wetair in theroom will be quickly cooleddown.

 

 

 

 

 

 

 

The airconditioner generates noise.

System switches to heating mode after defrosting.

Defrosting process will generate some water, which willturn to vapor.

The air conditioner is buzzing when operation begins.

Temperature control will be buzzing when it startsworking. The noisewill become weak 1 minute later.

 

When the unit is turnedon, it purrs.

When the system has just started, the refrigerant is notstable. About 30 secs later, the purr of the unit becomeslow.

About 20 secs afterthe unit nrst enables  heating mode or when defrosting under heating mode.

It’s the sound of the 4-way valve switching direction. The sound will disappear after thevalve is in position.

There is a hissing sound when the unit has started or stopped and a slight hissing sound during and after operation.

It’s the sound of gaseous refrigerant that stops flowing and the soundof the drainage system.

There is a crunching sound during and after operation.

Because of temperature change, the front panel and other components may swell and cause an abrasive sound.

There is a hissing sound when the unit is turnedon or suddenly stopped during operation or afterdefrosting.

Because refrigerant suddenly stops flowing or changes theflow direction.

Dust comes from the air conditioner.

The unit startsoperation after being unused fora long time.

Dust inside the units come out together with theair.

The airconditioner generatessmells.

 

During operation.

Smells from the operating environment may be conducted through the air handler.

(2) The following situations are not operation failures.

NOTICE: Check the above items and take appropriate corrective measures. If the air conditioner continues improper function, please turn off the air conditioner immediately and contact MRCOOL or your installing dealer.

Error Code

Number

Error Code

Error

1

E1

Compressor high pressure protection

2

E4

Compressor air discharge high-temperature protection

3

E3

Compressor low pressure protection, refrigerant lack protection and refrigerant  collecting mode

4

F2

Condenser temperature sensor error

5

F3

Outdoor ambient temperature sensor error

6

F4

Discharge temperature sensor error

7

F6

Outdoor unit tube temperature sensor error

8

EE

Outdoor unit memory chip error

9

PF

Electric box sensorerror

10

H3

Compressor overload protection

11

H4

Overload

12

H5

IPM protection

13

H6

DC fan error

14

H7

Driver out-of-step protection

15

HC

Pfc protection

16

Lc

Startup failure

17

Ld

Compressor phase-sequence protection

18

LF

Power protection

19

U7

4-way valve switch-over error

20

P0

Drive reset protection

21

P5

Over-current protection

22

P6

Master control and drivercommunication error

23

P7

Driver module sensor error

24

P8

Driver module high temperature protection

25

P9

Zero-crossing protection

26

PA

AC current protection

27

Pc

Driver current error

28

Pd

Sensor connection protection

29

PE

Temperature drift protection

30

PL

Bus low-voltage protection

31

PH

Bus high-voltage protection

32

PU

Charge loop error

33

PP

Input voltage error

34

ee

Driver memory chip error

35

C4

ODU jumper cap error

WARNING

  1. When abnormalities occur, stop the unit immediately and disconnect power. Contact MRCOOL. If the unit continues to run abnormally, it may damage the unit and cause an electric shock or a fire hazard.
  2. DO NOT attempt repairs to the appliance yourself. Improper repair and maintenance can create electric shock and fire hazards. Please contact MRCOOL®Tech Support for further guidance or a qualified professional for repairs.

If the display panel or wired control displays an error code, please refer to the following table:

Setup Guide

To set up the mrcool Universal DC Inverter MDUO18048, 

  • Start by selecting a suitable location for both the indoor and outdoor units. 
  • Ensure proper clearance around the outdoor unit for airflow and easy maintenance access. 
  • Connect the refrigerant lines and electrical connections as per the manufacturer's instructions.
  • Mount the indoor unit securely on a wall or ceiling, depending on your preference. 
  • Use the wireless remote control to configure settings such as temperature, fan speed, and scheduling. 
  • For Wi-Fi connectivity, download the mrcool app and follow the in-app instructions to pair your device.

Pros & Cons

Pros:

  • High energy efficiency with SEER ratings up to 22
  • Quiet operation with noise levels as low as 25 dB
  • Advanced features like smart sensors and Wi-Fi connectivity
  • Universal compatibility suitable for various installations
  • Durable exterior unit with rust-resistant coating

Cons:

  • Higher initial cost compared to traditional AC units
  • Complex installation may require professional assistance
  • Limited availability of replacement parts in some regions
  • Some users may find the smart features overwhelming to use

Customer Reviews

Customers have praised the mrcool Universal DC Inverter MDUO18048 for its exceptional cooling performance and energy-saving capabilities. Many reviewers appreciate the quiet operation and the ease of use provided by the wireless remote control and smart app. However, some users have noted that the installation process can be complex and may require professional help.

Common complaints include higher than expected installation costs and occasional issues with Wi-Fi connectivity. Despite these minor drawbacks, the overall satisfaction rate remains high among customers who value its efficiency and modern features.

PDF

Faqs

What is the SEER rating of the Universal DC Inverter?

The SEER rating of the mrcool can be up to 22 SEER, indicating high energy efficiency.

Is the mrcool Universal DC Inverter suitable for large rooms?

With a cooling capacity of 18,000 BTU, this unit is suitable for larger rooms or open spaces. However, it's always best to consult with a professional to ensure the unit meets your specific needs.

Does the mrcool Universal DC Inverter come with a warranty?

MDUO18048 typically comes with a comprehensive warranty that covers parts and labor for several years. Check the specific terms and conditions provided by the manufacturer or retailer.

How often should I clean the air filters of the DC Inverter?

It is recommended to clean the air filters every 1-3 months depending on usage and environmental conditions. Regular cleaning helps maintain optimal performance and indoor air quality.

Can I install the MDUO18048 myself?

While it's possible to attempt self-installation, it's highly recommended to hire a certified technician due to the complexity of the process and potential safety risks involved.

Is the mrcool Universal DC Inverter compatible with smart home systems?

This unit is compatible with smart home systems through its Wi-Fi connectivity feature. You can control and monitor the system using the mrcool app on your smartphone or tablet.

What are some common troubleshooting steps for issues with the mrcool?

Common troubleshooting steps include checking power supply connections, cleaning air filters, ensuring proper refrigerant levels, and verifying if the system is in the correct mode (cooling or heating). Refer to the user manual for detailed steps or contact a technician if issues persist.

How quiet is the mrcool Universal during operation?

DC Inverter operates very quietly, with noise levels as low as 25 dB. This makes it an excellent choice for bedrooms, living rooms, or any space where noise needs to be minimized.

Does the mrcool have a dehumidification function?

This unit has a built-in dehumidification function that can remove up to 2.5 pints of moisture per hour from the air, helping to maintain a comfortable indoor environment.

What is the estimated lifespan of the MDUO18048?

With proper maintenance and care, the mrcool can last for 15 to 20 years or more. Regular servicing and adherence to manufacturer guidelines are crucial for extending its lifespan.

Cordless Lawn Mower XML09

Pressure Washer 100382M

Leave a Comment

Name

Email

Comment