Introducing the Ninja Blender-Food Processor QB1004

The Ninja Blender-Food Processor QB1004 is a 1200-watt, multi-functional kitchen appliance that combines the power of a blender and the precision of a food processor. With its sleek design and impressive performance, this machine is perfect for making smoothies, purees, sauces, dips, and more. It is available for an estimated price of $149.99 and was launched in 2021.

Detailed Specifications

The Ninja Blender-Food Processor QB1004 boasts the following key features:

• 1200 watts of power
• Total Crushing Blender and Food Processor in one
• 6-cup food processing bowl and 72-ounce blender pitcher
• Dishwasher-safe parts
• Interchangeable stainless steel blades
• BPA-free and dishwasher-safe parts
• Pulse, single-serve, and dough settings
• Easy-to-use control panel

Ninja Getting Started

• Master Pod

• Master Prep Professional 40 oz. Pitcher with Non-Slip Base

• Ninja 4-Blade Assembly

• Master Prep Professional 48 oz. Pitcher with Non-Slip Base

• Pitcher Splashguard

• Ninja 6-Blade Assembly

• Pitcher Storage Lid

• Master Prep Professional Bowl with Non-Slip Base

• Bowl Splashguard

• Upper Chopping Blade Assembly (bowl)

• Lower Chopping Blade Assembly (bowl)

• Bowl Storage Lid

• Power Cord (not shown)

NOTE: Attachments are not interchangeable.

The Ninja Master Prep Professional is an indispensable kitchen tool that is perfect for blending, chopping, mixing or pureeing when preparing your favorite recipes. For best results, be sure to carefully read all the instructions contained in the manual before using this appliance.

450 Watt Master Pod
The 450 watt Master Pod operates on 120V., 60Hz. electrical power. NEVER allow the Master Pod to become wet when plugged into an electrical outlet.
WARNING: The Master Pod should never be immersed in water or any other liquid.
CAUTION: Make sure that the Master Pod is unplugged from the electrical outlet and that the Blade Assemblies have stopped turning before removing from the bowl or pitchers.
CAUTION: The Blade Assemblies are sharp and not locked in place. Make sure to carefully remove the splashguard and Blade Assembly, holding it by the shaft, before emptying contents of the pitcher or the Master Prep Professional Bowl. Failure to do so will result in a risk of laceration.
IMPORTANT: Never run the appliance empty.

Before First Use

WARNING: Blade Assemblies are sharp and not locked in place. If using the pour spout, ensure that the splashguard is fully on the pitcher. Failure to do so will result in a risk of laceration.

PLEASE KEEP THESE IMPORTANT SAFEGUARDS IN MIND WHEN USING THE APPLIANCE:

• IMPORTANT: Make sure that the Master Pod is plugged in for use.

• IMPORTANT: Never add ingredients into the container before placing the Blade Assemblies in first.

• IMPORTANT: Attachments are not interchangeable.

• IMPORTANT: DO NOT attempt to operate the appliance without the splashguard on.

• IMPORTANT: Never run the appliance empty.

• IMPORTANT: Appliance accessories are not intended to be used in the microwave as it may result in damage to the accessories.

WARNING: Blade Assemblies are sharp and not locked in place. Make sure to carefully remove the splashguard and Blade
Assembly, holding it by the shaft. Replace the splashguard before emptying contents of the pitcher. Failure to do so will result in a risk of laceration.

WARNING: DO NOT try to place the Blade Assemblies onto the Master Pod and then into the Master Prep Professional pitchers. Always assemble the Ninja 6-Blade and Ninja 4 Blade Assembly inside the pitchers

CAUTION: DO NOT immerse the Master Pod in water or any other liquid.

1. Remove all packaging material and labels from the appliance. Separate/remove all parts from each other.

2. Wash the lids, splashguards, bowl, pitchers, and blade assemblies in warm, soapy water. When washing the blade assemblies use a dish-washing utensil with a handle to avoid direct hand contact with blades.
   WARNING: Handle the blade assemblies with care when washing, as the blades are sharp.

3. Handle the blade assemblies with care to avoid contact with sharp edges. Rinse and air dry thoroughly.

4. The pitchers, bowl, lids, splash guards, and Blade Assemblies are all dishwasher safe. It is recommended that the lids, splash guards, and blade assemblies be placed on the top rack. Ensure that the blade assemblies are removed from the pitcher and the bowl before placing them in the dishwasher.

5. Wipe the motor base clean with a damp cloth.

Assembly and Use of the Pitchers

WARNING: Handle the Ninja 4-Blade and 6-Blade Assemblies with care, as the blades are sharp.
WARNING: Remove utensils prior to processing. Failure to remove may cause the pitcher to be damaged or to shatter, which may cause personal injury.
WARNING: DO NOT try to place the Ninja 4-Blade or 6-Blade Assemblies onto the Master Pod and then into the pitcher.
WARNING: DO NOT attempt to operate the appliance without the safety splashguard in place.
WARNING: Never leave the appliance unattended while in use.
CAUTION: DO NOT blend hot liquids, doing so may cause excessive pressure buildup, resulting in risk of the user being burned.
IMPORTANT: Make sure that the Master Pod is plugged in for use.

1. Review warning and caution statements above before proceeding to number 2.

2. Place the pitcher on a clean, dry, level surface.

3. Holding the Ninja 4-Blade Assembly or Ninja 6-Blade
   Assembly by the shaft, place it onto the spindle pin inside the Master Prep® Professional pitcher.

   • Use the Ninja 6-Blade Assembly in the 48 oz.

   • Use the Ninja 4-Blade Assembly in the 40 oz. 
     IMPORTANT: Place the Ninja Blade Assemblies inside the pitcher carefully as the blades are sharp.

     

4. Add the ingredients to be processed into the Ninja Master Prep Professional pitcher.

5. Place the pitcher splashguard onto the top of the Ninja Master Prep Professional pitcher. (fig. 3)
   IMPORTANT: Never add ingredients into the Ninja Master Prep Professional pitcher before placing the blade assembly in first.

6. Review warning and caution statements on page 8 before proceeding to number 7.

7. Place the Master Pod on top of the pitcher splash guard making sure that it is securely in place. (fig. 4) DO NOT attempt to operate the appliance without the safety splashguard in place.

8. To start the appliance, plug the power cord into the electrical outlet, securely hold Master Pod while operating and press on the On/Off pulse button located on the top of the power head. (fig. 5)

9. Hold the Ninja® Master Prep® Professional pitcher firmly while depressing the On/Off pulse button to ensure the unit stays in place.
   NOTE: DO NOT operate the appliance continuously for more than 15 seconds at a time.

10. To stop the appliance, remove your fingers from the On/ Off pulse button.

11. In order to obtain a better quality of chopping, operate the appliance by using the “pulse” method.

12. Make sure that the Blade Assembly has stopped completely before removing the Master Pod.

13. If the ingredients stick to the side of the Master Prep Professional pitcher, stop the appliance, and remove the Master Pod and the splashguard. Use a spatula to dislodge the pieces and then replace the splash guard and the Master Pod. Continue processing.

14. Depending on the consistency of the contents, use the pouring spout to empty liquid contents.

15. For thicker consistencies, first, remove the pitcher splash guard. Then, carefully remove the Blade Assemblies by the top of the shaft. Place blade assemblies away from the work area to avoid accidental contact. Finally, empty the contents from the pitcher.

HINTS & TIPS FOR USING YOUR NINJA MASTER PREP PROFESSIONAL

1. The Chopping Blade Assembly can be used for chopping meat, fish, vegetables, cheese etc.
2. For mincing, chopping and pureeing, increase the length of pulses.
3. For coarse chopping, use short, quick pulses and monitor food texture.
4. Pre-cut larger pieces to make them fit into the Master Prep. When chopping hard foods (e.g. meat, cheese) cut into 1-inch cubes.

Assembly and Use of the Master Prep Bowl

• WARNING: Handle the Upper and Lower Chopping Bowl Blade Assemblies with care, as the blades are sharp.

• WARNING: Remove utensils prior to processing. Failure to remove may cause the bowl to be damaged or to shatter, which may cause personal injury.

• WARNING: DO NOT try to place the Blade Assemblies onto the Master Pod and then into the bowl.

• WARNING: DO NOT attempt to operate the appliance without the safety splashguard in place.

• WARNING: DO NOT crush ice in Master Prep Bowl or damage may occur to the unit.

• WARNING: Never leave the appliance unattended while in use.

• CAUTION: DO NOT blend hot liquids, doing so may cause excessive pressure buildup, resulting in risk of the user being burned.

• CAUTION: Upper and Lower Chopping Bowl Blade Assemblies are loose and not locked in place. Make sure to remove the Chopping Blade Assembly before emptying the contents of the processor bowl.

• IMPORTANT: Make sure that the Master Pod is plugged in for use.

  

1. Review the warning and caution statements above before proceeding to number 2.

2. Place the Master Prep Professional Bowl on a clean, dry, level surface.

3. Holding the Lower Chopping Blade Assembly by the shaft, place it over the spindle pin inside the Master Prep Professional Bowl. (fig. 1)

4. Carefully insert the Upper Chopping Blade Assembly over the Lower Chopping Blade Assembly rotating it until it locks onto the Lower Chopping Blade Assembly. (fig. 2)
   IMPORTANT: Always assemble the Chopping Blade Assembly inside the container.
   WARNING: DO NOT try to place the Upper and Lower Chopping Blade Assembly onto the Master Pod and then into the Master Prep Professional Bowl.

   

   

5. Review warning and caution statements on page 10 before proceeding to number 6.

6. Place the food that you want to process into the Master Prep Professional Bowl.
   IMPORTANT: Never add ingredients into the Master Prep Professional Bowl before placing the blade assembly in first.
   NOTE: DO NOT add more than 2 cups dry or 1 cup liquid ingredients as this will strain the motor and may cause overflow.

7. Place the splashguard on the bowl. (fig. 3)

8. Place the Master Pod on top of the splashguard making sure that it is securely in place. (fig. 4) DO NOT attempt to operate the appliance without the safety splashguard in place.

9. To start the appliance, plug the power cord into the electrical outlet, securely hold Master Pod while operating and press on the on/off pulse button located on the top of the Master Pod. (fig. 5)

10. Hold the Master Prep® bowl firmly while depressing the
    On/Off pulse button to ensure the unit stays in place.
    NOTE: DO NOT operate the appliance continuously for more than 15 seconds at a time. Be careful not to over-process. For coarsely chopped foods, use repeated short pulsing action until the desired consistency is reached.

11. To stop the appliance.

12. In order to obtain a better quality of chopping, operate the appliance by using the “pulse” method.

13. Make sure that the Chopping Blade Assembly has stopped completely before removing the Master Pod.

14. If the ingredients stick to the side of the Master Prep® Professional bowl, stop the appliance, and remove the Master Pod and the splashguard. Use a spatula to dislodge the pieces and then replace the splash guard and the Master Pod. Continue processing.

15. The blade assembly is loose and not locked in place. Remove the blade assembly by its shaft before you empty the contents of the Master Prep Professional Bowl.

HINTS & TIPS FOR USING YOUR NINJA MASTER PREP PROFESSIONAL

1. The Chopping Blade Assembly can be used for chopping meat, fish, vegetables, cheese etc.

2. For mincing, chopping and pureeing, increase the length of pulses.

3. For coarse chopping, use short, quick pulses and monitor food texture.

4. Pre-cut larger pieces to make them fit into the Master Prep. When chopping hard foods (e.g. meat, cheese) cut into 1-inch cubes.

Food Processor QB1004 Description

The Ninja Blender-Food Processor QB1004 is designed to handle all of your blending and food processing needs. With its powerful 1200-watt motor, this machine can handle even the toughest ingredients with ease. The Total Crushing Blender pulverizes ice, fruits, and vegetables into smooth, even consistencies, while the Food Processor provides precise, consistent results for chopping, mixing, and pureeing. The interchangeable blades make it easy to switch between functions, and the large capacity bowls and pitcher allow for bulk processing.

Setup Guide

To set up the Ninja Blender-Food Processor QB1004, follow these steps:

1. Wash and dry all parts before use.
2. Assemble the base and attach the desired container (blender pitcher or food processing bowl).
3. Add your ingredients to the container.
4. Secure the lid and align the arrow on the lid with the arrow on the base.
5. Select the desired setting and press the start button.

Care & Maintenance of Blender-Food Processor QB1004

HOW TO CLEAN

CAUTION: Make sure that the Master Pod is unplugged from the power source before inserting or removing any attachment and before cleaning.
CAUTION: DO NOT immerse the Master Pod into water or any other liquid.

1. Separate/remove all parts from each other.

2. Hand Washing: Wash the lids, splashguards, pitchers, bowl and Blade Assemblies in warm, soapy water. When washing the Blade Assemblies, use a dish-washing utensil with a handle to avoid direct hand contact with blades. Handle the Blade Assemblies with care to avoid contact with sharp edges. Rinse and air dry thoroughly.
   Dishwasher: The pitchers, bowl, lids, splashguards, and Blade Assemblies are all dishwasher safe. It is recommended that the lids and blade assemblies be placed on the top rack. Ensure the blade assemblies are removed from the pitchers and the bowl before placing in the dishwasher.
   WARNING: Handle the Blade Assemblies with care when washing, as the blades are sharp. Contact with the blades’ edges can result in laceration.

3. Wipe the motor base clean with a damp cloth. Please call customer service if any servicing needs to be performed on the appliance at 1-877-646-5288.

HOW TO STORE

1. Store the Master Prep upright with the blade assembly and splashguard inside the corresponding container. Loosely wrap the power cord around the Master Pod. RESETTING THE MOTOR THERMOSTAT The Ninja® Master Prep Professional features a unique safety system which prevents damage to the unit’s motor and drive system should you inadvertently overload your appliance. If the appliance is overloaded, the motor will stop. To reset the appliance, follow the resetting procedure below:

   • Unplug the appliance from the electrical outlet.

   • Remove the Master Pod and splashguard and empty the container and ensure that no food is jamming the blade assembly.

   • Allow the appliance to cool for approximately 10 minutes.

   • Replace the splashguard and Master Pod onto the container and re-plug the appliance into the electrical outlet.

   • Proceed to use the appliance as before making sure not to exceed the recommended maximum capacities.

Troubleshooting

Warranty of Ninja Blender-Food Processor QB1004

Shark Ninja Operating LLC warrants this product to be free from material defects and workmanship for a period of one (1) year from the date of purchase when utilized for normal household use, subject to the following conditions, exclusions and exceptions. The liability of SharkNinja Operating LLC is limited solely to the cost of the repair or replacement of the unit at our option. This Limited Warranty does not cover normal wear of parts and does not apply to any unit that has been tampered with or used for commercial purposes. This Limited Warranty does not cover damage caused by misuse, abuse, negligent handling or damage due to faulty packaging or mishandling in transit.

Ninja Pros & Cons 

Pros 

• Pros: Powerful 1200-watt motor
• Pros: Multi-functional, with both blender and food processor capabilities
• Pros: Large capacity bowls and pitcher
• Pros: Easy-to-use control panel

Cons

• Cons: May be too loud for some users