Introduction

The Noise ColorFit Pro2 Touch Watch is a smartwatch with lots of features that's made to fit your busy lifestyle. There are many fitness and health tracking features on this watch's bright 1.3-inch full-color display, such as heart rate monitoring, sleep tracking, and step counts. It also has a number of sports modes that let you properly keep track of different activities. The ColorFit Pro2 works with both Android and iOS devices and lets you handle music, get smart notifications, and make your own watch faces. The Noise ColorFit Pro2 Touch Watch is the best way to stay connected and motivated all day long. It looks good and is built to last.

Detailed Specifications

The Noise ColorFit Pro2 Touch Watch boasts several impressive features, including:

• 1.3" full-touch color display with 240 x 240 resolution
• Bluetooth 5.0 connectivity
• Up to 10 days of battery life on a single charge
• Interchangeable straps with quick-release mechanism
• Customizable watch faces
• Heart rate monitoring
• Sleep tracking
• Step counting
• Call and message notifications
• Control music playback
• Find my phone feature
• IP68 water and dust resistance

Pairing process

1. Turn on Bluetooth and GPS on your smartphone.

2. Open the NoiseFit Sport app’s pairing menu.

3. Select ColorFit Pro 2 from the menu.

4. Click Ok to complete the pairing process.

5. See below for one additional step on iPhones.

iPhones will not prompt you with any information unless you complete Bluetooth pairing with your ColorFit Pro 2 in the built-in Bluetooth settings on your iPhone after you complete the paring process in the NoiseFit Sport app.

Note: During the pairing process, NoiseFit Sport will prompt you to enable GPS and Bluetooth, and authorize NoiseFit Sport for GPS access on your mobile phone.

Synchronising Data

ColorFit Pro 2 can track your health data such as 24×7 heart-rate. It needs to be connected to the NoiseFit Sport app to record all this data. To synchronise ColorFit Pro 2 data with NoiseFit Sport, open the app and swipe down on the page. A sync prompt appears.

• For iOS devices
  Open the iOS phone > set > bluetooth > search and click pair.

Note: To prevent health data loss, please synchronise watch data at least once every 7 days as ColorFit Pro 2 cannot store data internally for more than 7 days.

Instruction for Use

Charging schematic
Connect and charge the ColorFit Pro 2 as shown above. Please charge your ColorFit Pro 2 for at least 2 hours before the rst time you use it.

Wear/Replace the strap

Wear ColorFit Pro 2 a nger’s distance above your wrist bone. Wear the watch tight enough that no light can be seen from the heart rate sensor on the back of the watch. The watch should not move when you move your arms about.

Replace the strap.

Flip the switch and take out the wrist band.

Tip: Wearing too loosely may affect the accuracy of heart rate data.

Operating Instructions

1. Right Key Functions

   Short press the right key to return to the previous page Long press the right key to start

   

2. Changing watch faces

   Press and hold the watch face to see the interface to choose watch faces.

   

3. Using ColorFit Pro 2
   Swipe the screen to enter different modes

   

Description

A smartwatch with many practical features, the Noise ColorFit Pro2 Touch Watch is perfect for daily usage. You can easily see alerts, messages, and other data on the full-touch color screen since it is bright and clear. The extended battery life allows you to go for days without having to recharge, and the Bluetooth 5.0 connectivity guarantees a steady and quick connection to your smartphone. This watch may be tailored to your unique taste with its replaceable straps and customisable watch faces. Staying on top of your health and fitness objectives is made easier with its heart rate monitoring, sleep tracking, and step counting functions. In addition, it is a functional and easy device for everyday usage thanks to the find my phone feature, music control, and call and message notifications.

Noise ColorFit Pro2 Touch Watch Function Introduction

ColorFit Pro 2 Modes

1. Sports Mode: Lets you choose a Sports Mode. You can select which modes to show on your ColorFit Pro 2 with the app.

2. Heart Rate: Perform a heart rate test or check your heart rate data for the day.

3. Breathe: Helps you regulate your breathing and relax your mood.

4. Alarm: View, turn off or turn on the alarm clock. You can add alarms with the app.

5. Music: Control music playing on your smartphone. ColorFit Pro 2 cannot store or playback music on the watch.

6. Stopwatch: Start a timer or a countdown.

7. Sports Records: View recent sports recordings. For more functions like sleeping, please check the NoiseFit Sport app.

ColorFit Pro features

Recording Sports on ColorFit Pro 2

1. To enter sports mode: Click the sports mode icon > Select the sports type > The sports countdown starts automatically.

2. During sports: Pause recording with a short press of the right key. Resume recording with a short press of the right key.

3. End sports : End recording your sports with a long press of the right key > Select the end button on the screen.

Download and install NoiseFit Sport App

You can setup the watch through the NoiseFit Sport app for iOS or Android devices.
Scan the QR code below with your smartphone camera or search for NoiseFit Sport in your app store.

http://www.youduoyun.com/q/1000006.html

DO NOT PAIR THE WATCH DIRECTLY WITH BLUETOOTH IN YOUR PHONE’S SETTINGS.

Setup Guide

Setting up the Noise ColorFit Pro2 Touch Watch is easy and straightforward. Here's a quick guide on how to operate, assemble, configure and pair it with your smartphone:

1. Charge the watch fully before first use.
2. Install the NoiseFit app on your smartphone.
3. Turn on the watch and go to the Bluetooth settings.
4. Open the NoiseFit app on your smartphone and follow the instructions to pair the watch.
5. Once paired, you can customize the watch face, set up notifications, and configure other settings through the app.

Cleaning and Maintenance

Wearing and caring for your ColorFit Pro 2

1. Keep the product clean

2. Keep the product dry

3. Do not wear it too tight

4. Do not use household cleaners to clean the watch. Use soap free detergent if you need to clean it

   

Safety and Product Information Notes

Battery warning: Do not disassemble, pierce or damage the battery. Do not disassemble the built-in batteries of non-replaceable battery devices. Do not use sharp objects to remove the battery.
Health Warning: The watch’s optical heart rate sensor glows green and ashes. If you suffer from epilepsy or are sensitive to blinking light sources, please consult your physician to ask if you can wear this product. The device tracks your daily activities through sensors. These data are intended to tell you about your daily activities, such as steps, sleep, distance, heart rate and calories, but may not be completely accurate. The device, accessories, heart rate sensors and other relevant data are designed for entertainment and tness, not for medical purposes. They are not applicable to the diagnosis, monitoring, treatment or prevention of any diseases or symptoms. The heart rate data is for reference only. We are not responsible for any consequences caused by any data deviation.

Cycling Warning

Please maintain good judgment at all times and ride in a safe manner. Make sure your bike and hardware are properly maintained, and all components are properly installed.

Matters Needing Attention

• Watch data needs to be kept once every 7 days to avoid data loss.

• The watch has no waterproof effect on seawater, acidic and alkaline solutions, chemical reagents, and other corrosive liquid. The damage or defects caused by misuse or improper use are not covered by the warranty.

• Sports mode supports up to 6 hours of exercise at a time.

• The watch has a waterproof level of IP68 and supports cold water shower, swimming, but not diving.

• Avoid wearing the watch too tight in daily use. Please keep the parts of the watch touching the skin dry.

• When your heart rate is measured, keep your arm still during the test

Troubleshooting

Here are some common problems and solutions for the Noise ColorFit Pro2 Touch Watch:

• If the watch is not pairing with your smartphone, make sure both devices are within range and Bluetooth is enabled on both devices. Try restarting both devices and then trying again.
• If the watch's battery is draining quickly, try turning off unnecessary features like the always-on display and notifications. Make sure the watch is fully charged before using it again.
• If the touchscreen is not responding, try restarting the watch. If that doesn't work, try resetting the watch to its factory settings.

Warranty Information

What is covered in the Limited warranty period? 
Warranty is applicable on the Noise product including accessories on manufacturing defects (if any) for 1 Year from the date of purchase

What are the things that are not covered in the warranty

1. Product has been subject to unauthorized tampering, modication or repairs.

2. Product has suffered physical damage on the account of abuse, neglect, or improper use, handling, storage, installation, or testing, including any use that is not in accordance with the product manual, documentation, or other instructions provided along with the node product.

3. Product has suffered any misconduct.

4. Any other clause mentioned in our online return policy.

Note: For further information on product replacement/refund related queries, please refer to the terms and conditions mentioned in our return policy section on www.gonoise.com

Pros & Cons

Pros:

• Affordable price
• Long battery life
• Customizable watch faces and interchangeable straps
• Useful health and fitness features
• Stable and fast Bluetooth 5.0 connectivity

Cons:

• Touchscreen can be unresponsive at times
• Limited app support
• No built-in GPS

Customer Reviews

Customers have praised the Noise ColorFit Pro2 Touch Watch for its affordable price, long battery life, and useful health and fitness features. However, some have criticized it for its unresponsive touchscreen and limited app support. The most common complaint is the lack of built-in GPS, which some users have found to be a deal-breaker. Overall, the Noise ColorFit Pro2 Touch Watch is a solid budget-friendly smartwatch with a variety of useful features.