Introduction

The Omron Compressor Nebulizer NE-C29 is a reliable device designed for effective respiratory therapy at home. This nebulizer utilizes advanced compressor technology to deliver medication in fine aerosol mist, ensuring optimal absorption for conditions like asthma and COPD. Priced at $59.99, the NE-C29 features a compact design for easy portability and includes a variety of accessories for user convenience. Its quiet operation and simple controls make it an ideal choice for both adults and children seeking relief from respiratory issues.

SPECIFICATIONS

• Model: NE-C29
• Type: Compressor Nebulizer
• Electrical: 230V, 50Hz model ; 230V, 60Hz model
• Power Consumption: 138VA
• Operating Temperature/Humidity: +10°C to +40°C, 30% to 85% RH
• Storage Temperature/Humidity: –20°C to +60°C, 10% to 95% RH
• Weight: Approx. 2.3kg (compressor only)
• Dimensions: Approx. 186mm (w) × 180mm (h) × 216mm (d)
• Contents: Compressor, Nebulizer Kit, Air Tube, 5 pcs Replacement Filters, Mouthpiece, Adult Mask, Child Mask, Instruction Manual.

NOTES:

• Subject to technical modification without prior notice.
• Please note that specifications may vary with medication type used.
• Do not use the device where it may be exposed to flammable gas.
• This unit fulfils the provisions of the EC directive 93/42/EEC (Medical Device Directive) and the European Standard EN13544-1:2007, Respiratory therapy equipment - Part1: Nebulizing systems and their components.
• This OMRON product is manufactured under the strict quality system of OMRON HEALTHCARE Co., Ltd., Japan.

= Class II

= Read the instruction manual carefully

=Type B

Technical data for the OMRON Comp Air Pro compressor with the OMRON V.V.T.(Virtual Valve Technology) Nebulizer kit:

• Particle Size: *MMAD **approximately 3μm
• Medication Tank Capacity: 7 ml maximum
• Appropriate Medication Quantities: 2 ml minimum - 7 ml maximum
• Sound: Noise level (at 1 m distance) 60 db
• Nebulization Rate: 0.4 ml/min (by weight loss)
• Aerosol Output: **0.4 ml (2ml, 1%NaF)
• Aerosol Output Rate: **0.06 ml/min (2ml, 1%NaF)

NOTES:

• Performance may vary with drugs such as suspensions or high viscosity. See drug supplier’s data sheet for further details.
• The data above is referenced by OMRON HEALTHCARE.
• See web site of OMRON HEALTHCARE EUROPE to update technical information.

Result of cascade impactor **measurements for particle size with OMRON Comp Air Pro compressor and OMRON V.V.T. Nebulizer kit

1. MMAD = Mass Median Aerodynamic Diameter
2. Independently measured at SolAero Ltd., Canada, Dr. John Dennis, according to EN13544-1  

OPTIONAL PARTS AND ACCESSORIES

KNOW YOUR UNIT

Accessories

Description

The Omron Compressor Nebulizer NE-C29 is engineered with user convenience in mind. Its compact and lightweight design makes it easy to move around, while the quiet operation ensures minimal disruption during use. The device comes with both child and adult masks, making it suitable for all family members. The high nebulization rate ensures quick and effective medication delivery, reducing treatment time significantly.

The nebulizer features easy-to-clean components, many of which are dishwasher-safe, simplifying maintenance and hygiene. The device is also energy-efficient, operating within a wide voltage range to accommodate different power sources.

HOW TO PREPARE THE NEBULIZER FOR USE

WARNING:
Clean and disinfect the nebulizer kit, mouthpiece, and optional nosepiece or masks before using them for the first time after purchase, if the device has not been used for a long period of time. For directions on cleaning and disinfecting the parts of the device refer to page 16 in this instruction manual.

NOTE:

Make sure that the air filter is changed regularly. 

1. Make sure that the power switch is turned off.
   Check that the power switch is in the position.
2. Plug the power plug into a power outlet.
3. Remove the mouthpiece and cap from the nebulizer kit.
4. Remove the inhalation top from the medication cup.
   1. Rotate the inhalation top counterclockwise.

   2. Lift the inhalation top out of the medication cup.

      

5. Remove the vaporiser head from the medication cup.
6. Add the correct amount of prescribed medication to the medication cup.
   CAUTION:
   The capacity of the medication cup is 2 to 7 ml.
7. Reattach the vaporiser head to the medication cup.
8. Put the inhalation top back inside the medication cup.
   1. Align the protrusion on the inhalation top with the indent on the medication cup, as shown.

   2. Rotate the inhalation top clockwise and align with the medication cup until they click in place.

      

9. Attach the desired inhalation attachment, as described below.
   Attach the cap when using the mouthpiece or optional nosepiece. Using the cap with these attachments will reduce the amount of medication that is discharged into the air.
   • Attaching the Mouthpiece
     1. Attach the cap to the inhalation air inlet.
     2. Attach the mouthpiece to the inhalation top.

   • Attaching the Adult Mask

     • Attach the mask to the inhalation top. 

     NOTE: Do not attach the cap.

   • Attaching the Child Mask

     • Attach the mask to the inhalation top. 

     NOTE: Do not attach the cap.

   • Attaching the Nosepiece (Option)
     1. Attach the cap to the inhalation air inlet.

     2. Attach the nosepiece to the inhalation top.

        

10. Attach the air tube.
    1. Attach the air tube to the air connector on the compressor.

    2. Attach the other end of the air tube to the air tube connector on the medication cup.

       

NOTES:

• Make sure that the air tube is securely connected. Otherwise, air may leak from the air tube during use.
• Take care not to spill the medication when attaching the air tube. Keep the nebulizer kit upright.
• Use the nebulizer kit holder as a temporary holder for the nebulizer kit.

HOW TO TAKE MEDICATION

1. Hold the nebulizer kit as indicated on the right.
   CAUTION: Do not tilt the nebulizer kit so that it is at an angle of greater than 45°. Medication may flow into the mouth.

2. Press the power switch to the on () position.
   The compressor starts and nebulization starts.
   NOTE: Perform functional test, observe whether aerosol is generated.

   

   To stop nebulization
   Press the power switch to the off () position.
   WARNING:
   Do not block the ventilation slots on the compressor. This could result in the compressor overheating or malfunctioning.
   CAUTION:
   Do not block the air filter cover.

3. Inhale medication as according to your doctor’s and/or health care adviser’s instructions.
   1. Using the Mouthpiece
      Insert the mouthpiece into your mouth and inhale the medication breathing normally. Exhale as normal through the mouthpiece.
   2. Using the Adult Mask
      Attach the mask so that it covers your nose and mouth and inhale the medication. Exhale as normal through the mask.
      NOTE: If the amount of aerosol is too great, attach the cap.
   3. Using the Child Mask
      Attach the mask so that it covers your nose and mouth and inhale the medication. Exhale as normal through the mask.
      NOTE: If the amount of aerosol is too great, attach the cap.

   4. Using the Nosepiece (Option)
      Inhale the medication through the nosepiece, as shown and exhale through the mouth.

      

4. Complete your treatment.

   1. When you have finished inhaling your medication, turn the compressor off.
      Press the power switch to the off position.

      

   2. Unplug the air tube from the nebulizer kit.
      Always hold the air plug when disconnecting the air tube. 
   3. Check that there is no condensation or moisture remaining in the air tube.
      If there is moisture or liquid remaining in the air tube, be sure to follow the procedure below to remove any moisture from within the air tube.
      1. Make sure that the air tube is still connected to the air connector on the compressor.
      2. Turn on the compressor and pump air through the air tube to expel the moisture.
   4. Unplug the air tube from the compressor.
      WARNING:
      Condensation may occur in the air tube. Do not store the air tube while it contains condensation or moisture. This could result in infection via bacteria.
5. Unplug the device from the power outlet.

Setup Guide

To operate the Omron Compressor Nebulizer NE-C29, 

1. Start by unpacking and assembling the device. 
2. Connect the tubing to the compressor and attach the nebulizer kit. 
3. Fill the medication chamber with the prescribed dose and secure it to the nebulizer. 
4. Choose either the child or adult mask depending on the user and connect it to the nebulizer kit.
5. Plug in the compressor and turn it on. 
6. Place the mask over your nose and mouth, ensuring a secure fit, and breathe in normally through your mouth. 
7. Continue until all medication is used, indicated by the nebulizer producing a fine mist.

CLEANING AND DAILY DISINFECTING

Following the cleaning instructions after each use will prevent any remaining medication in the bottle from drying resulting in the device not nebulizing effectively and also for preventing infections.

WARNING:
Be sure to wash the parts after use, and dry the parts immediately after washing them.

1. Remove the nebulizer kit from the air tube and disassemble the nebulizer kit. Separate the inhalation attachment and the nebulizer kit, and disassemble the nebulizer kit.
2. Discard any remaining medication in the medication cup.
3. Wash all the parts of the nebulizing parts in warm water and mild detergent, or wash in a dishwasher.
   For instructions on how to disinfect the parts, see the following section.

4. After cleaning and disinfecting the parts, rinse them thoroughly with clean water and allow the parts to air dry in a clean environment.

   

Disinfecting the Parts of the Nebulizing Parts 
Always disinfect the medication cup, mouthpiece and other parts of the nebulizing parts after the last treatment of the day. To disinfect the parts, use one of the methods described below:

A. Use a commercially available disinfectant. Follow the instructions provided by the disinfectant manufacturer.

B. Parts may be boiled for more than 15 minutes (except for mask).

1. Submerge the parts in the cleansing solution for the specified period.
2. Remove the parts and discard the solution.
3. Rinse the parts with clean hot tap water.

MAINTENANCE AND STORAGE

1. Assemble the nebulizing parts.
2. If the compressor is dirty, wipe it clean with a soft cloth moistened with water or mild detergent.
   WARNING: The compressor is not waterproof.
3. If the outside of the air tube is dirty, wipe it clean with a soft cloth moistened with water or mild detergent.

4. Store the parts in the storage compartment in the compressor.

   

   NOTE: Make sure that the parts are clean and dry. Do not place parts in the storage compartment if they are still wet.

5. Store the unit in a clean location.

NOTE: Nebulizer kit should be replaced after using for 6 months.

Handling the Vaporiser Head
The vaporiser head is an important part that is used to vaporise medication. Be sure to observe the following precautions when handling it.

CAUTION:

• Always wash the vaporiser head after each use.
• Do not use a brush or pin etc., to clean the parts.
• When disinfecting the parts by boiling, be sure to boil them in plenty of water.
• Do not boil vaporiser head together with other objects, other than applicable nebulizer accessories.
• Do not use a microwave oven, dish dryer or hair dryer to dry parts.

To keep your device in the best condition and protect the device from damage follow these directions:

CAUTION:

• Do not drop the compressor or nebulizer kit, or subject them to strong shocks.
• Do not carry or leave the nebulizer while the medication cup contains medication.

NOTES:

• Do not store the device in extreme hot or cold temperatures, high humidity or under direct sunlight.
• Dispose of the device and any used accessories or optional parts according to applicable local regulations.
• Never clean with benzene, thinner or a flammable chemical.

HOW TO CHANGE THE AIR FILTER

If the air filter becomes dirty, or has water or medication spilled on it, replace the air filter with a new one. On average, the air filter should be changed every 60 days even if it does not appear dirty.

1. Pull the air filter cover off the compressor.
2. Change the air filter.
   Remove the old air filter with a sharp object, such as a toothpick, and insert the new air filter.

3. Put the air filter cover back in place.

   

NOTES:

1. Use only OMRON air filters designed for this unit.
   Do not operate without a filter.
2. There is no front or back orientation for the air filters.
3. Check that air filters are clean and free of dust before inserting them.
4. Do not attempt to wash or clean the filter. If the air filter becomes wet, replace it. Damp air filters can cause blockages.
5. To prevent the mesh of the air filter cover becoming blocked, wash the cover regularly. Do not boil the air filter cover.
   Remove the air filter cover, wash it, and make sure it is dry and reattached correctly.
6. Please contact your OMRON dealer for additional air filters, or if the parts supplied with the device are damaged or missing.

IMPORTANT SAFETY NOTES

To ensure the correct use of the product basic safety measures should always be followed including the precautions listed below:

WARNING:
Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.

Usage

• For type, dose, and regime of medication follow the instructions of your doctor or respiratory therapist.
• Clean and disinfect the nebulizer kit, mouthpiece and optional nosepiece or masks before using them for the first time after purchase, if the device has not been used for a long period of time.
• If the device is used by more than one person, be sure to clean and disinfect parts before they are used by each person.
• Always dispose of any remaining medication after use, and use fresh medication each time.
• Do not use only water in the nebulizer, for nebulizing purposes.
• Do not use the device where it may be exposed to flammable gas.
• Do not block the ventilation slots. Never place the device where the ventilation slots may be obstructed during operation. Do not cover the compressor with a blanket or towel etc., during use.

(Risk of electrical shock)

• Never unplug the power cord with wet hands.
• The compressor and power cord are not waterproof. Do not spill water, or other liquids, on these parts. If liquid does spill on these parts, immediately unplug the power cord and wipe off the liquid with gauze or other absorbent material.
• Do not use or store the device in humid locations, such as a bathroom.
• Do not immerse the main unit in water or other liquid. Although this device fulfils the provisions of the EMC (Electromagnetic Compatibility) directive, the use of it should be avoided in direct vicinity of other electric devices.

Maintenance and Storage

• Store the device and accessories in a clean location.
• Always rinse the nebulizing parts with clean hot tap water after disinfecting them.
  Never leave the cleaning solution in the nebulizing parts.
• Be sure to wash the parts after use, and dry the parts immediately after washing them.
• Keep the device out of the reach of unsupervised infants and children. The device may contain small pieces that can be swallowed.
• Do not store the air tube while there is moisture or medication remaining inside it.

CAUTION:
Indicates a potentially hazardous situation which if not avoided, may result in minor or moderate injury, or physical damage.

Usage

• Provide close supervision when this device is used by, on, or near children or invalids. 􀀁Make sure that the vaporiser head, air filter, and other parts are attached correctly. 􀀁Make sure that the air filter is clean. If the air filter has changed colour, or has been used on average for more than 60 days, replace it with a new one.
• Do not tilt the nebulizer kit so that it is at an angle of greater than 45º, or shake it while in use.
• Do not use or store the device while the air tube is bent.
• Approved for human use only.
• Use only original OMRON parts and accessories. Use of unsupported parts may damage the device.
• Do not add more than 7 ml of medication to the medication cup.
• Do not drop the compressor or nebulizer kit, or subject them to strong shocks.
• Do not distort the vaporiser head, or jab the nozzle of the medication cup with a pin etc.
• Do not insert fingers or objects inside the compressor.
• Do not block the air filter cover.
• Do not disassemble or attempt to repair the compressor or power cord.
• To avoid injury to the nose mucosa, do not squeeze the nosepiece into the back of the nose.
• Do not block the slit between the cap and the inhalation air inlet.
• Do not use a microwave oven or hair dryer to dry the nebulizing parts.
• Changes or modifications not approved by OMRON HEALTHCARE will void the user warranty.

(Risk of electrical shock)

• Plug the device into the appropriate voltage outlet. Do not overload power outlets or use extension cords.
• Always unplug the device from the power outlet after use.
• Always disconnect the power cord before cleaning.

Maintenance and Storage

• Do not carry or leave the nebulizer while the medication cup contains medication.
• When sterilizing parts by boiling, make sure that the container does not boil dry.
• Never place, or attempt to dry the compressor, the power cord or nebulizing parts in a microwave oven.

General Safety Precautions:

• Inspect the device and parts before using the them each time, and check that there are no problems. In particular, be sure to check the following:
  • That the vaporiser head, nozzle or air tube are not damaged.
  • That the nozzle is not blocked.
  • That the compressor operates normally.
• When using this device, there will be some noise and vibration caused by the pump in the compressor. There will also be some noise caused by the emission of compressed air from the nebulizer kit. This is normal and does not indicate a malfunction, or reduce the working life of the device.
• Operate the device only as intended. Do not use the device for any other purpose.
• Do not use the device at temperatures greater than +40ºC.
• Dispose of the device and any used accessories or optional parts according to applicable local regulations. Unlawful disposal may cause environmental pollution.

Troubleshooting

Check the following if your unit should fail during operation. You can also refer to the pages of this manual for complete instructions.

NOTES:

• If the suggested remedy does not solve the problem, do not try to repair the device - no parts of the unit are user serviceable. Return the unit to an authorized OMRON dealer.
• The device should be serviced once a year by an approved OMRON service centre.

Omron Compressor Nebulizer NE-C29 Pros & Cons

Pros

• Compact and lightweight design
• Quiet operation
• High nebulization rate for quick treatment
• Easy-to-clean and maintain
• Includes both child and adult masks
• Affordable price point

Cons

• Limited battery life if used with a portable power source
• Some users may find the compressor slightly bulky
• Requires regular cleaning to maintain efficiency

Customer Reviews

Customers have praised the Omron Compressor Nebulizer NE-C29 for its ease of use and effective performance. Many users appreciate the quiet operation and the inclusion of both child and adult masks. However, some users have noted that the compressor can be slightly bulky and requires regular cleaning to ensure optimal performance.