Quatro Jet-Stream Tall Premium Dust Collectors User Manual

Overview

The Jet-Stream Tall Premium Dust Collectors are compact, high-performance indoor dust and fume collection systems built to capture airborne particulate at the source. The Jet-Stream Tall Premium Dust Collectors are designed for clean, quiet operation in environments that need reliable dust control, especially where fine debris and harmful particles must be removed before they spread through the workspace.

This system uses two-stage filtration and i Series controls to deliver variable airflow, automatic pressure compensation, and clear service alerts. It is a strong fit for dental, lab, and other precision applications that benefit from source capture and low-noise operation.

Specifications

• Nominal airflow: 110 CFM
• Voltage options: 115/1/60 at 7 amps, 825 watts; 230/1/50 at 4 amps, 750 watts
• Approximate size: 16.75 in high x 11 in wide x 15.75 in deep
• Approximate weight: 36 lb
• Filtration: bag filter plus HEPA filter
• Controls: i Series soft-touch power, speed up, and speed down buttons
• Remote connection: DB9-based remote operation support
• Hose connection: 1.5 in hose per inlet

Detailed Description

The Jet-Stream Tall Premium Dust Collectors use a two-stage airflow path. Large debris is captured by the bag filter first, then fine particulate is handled by the HEPA stage. This makes the unit suitable for dust-heavy tasks where both visible debris and microscopic particles need to be controlled.

The system is built for quick servicing and simple operation. The filter compartment opens from the side, while motor access is reached through the bottom panel. The i Series control panel uses LED indicators and audible alarms to show operating status, filter condition, motor wear, and remote standby state. Autoflow speed control helps the system adjust motor output as filter resistance changes.

Key design features include a space-saving body, antimicrobial bag filtration, medical-grade HEPA filtration, quiet performance, and a quick-access motor compartment. The unit can also be adapted for OEM and custom milling-machine setups.

Safety

• Read the manual before operating the system and keep it for future reference.
• Always switch the unit off and disconnect power before opening covers, changing filters, or servicing motors.
• Use only the specified voltage and a grounded outlet.
• Do not use two-prong adapters or defeat the ground connection.
• Avoid moisture, rain, and wet operating areas.
• Keep the unit at least 6 inches from walls and objects, especially around the discharge area.
• Do not kink the hose or restrict airflow.
• Keep all filters installed whenever the system is running.
• Allow hot motors to cool for 45 minutes before service.
• The system is intended to remain plugged in; use the power button for normal on/off control.
• Do not operate in explosive, highly flammable, or toxic environments.

Setup and Operation

Before startup, place the unit in its final location, confirm that the filters are installed in the proper order, and connect the supplied hose or optional arm. Use only the supplied power cord and plug the system directly into a wall outlet on a suitable dedicated circuit whenever possible.

To start the system, connect the power cord to the unit and then to the power source. Press the power button to turn the collector on. The system does not require a warm-up period and can be switched on only when needed. Use the speed up and speed down controls to set the airflow for the application. For maximum collection, use the highest acceptable speed for the noise level and suction needed.

Autoflow automatically raises motor speed as filter resistance increases, helping maintain airflow as the filters load with dust. After a filter change, the speed may return to the original set point automatically, and airflow should still be checked to confirm that ventilation is adequate.

The i Series control panel uses multiple indicators:

• System On LED: shows the unit is running.
• Service Motors LED: warns when motor wear is approaching service limits.
• Service Filters LED: warns when filter pressure is rising or replacement is needed.
• Remote/Standby LED: shows remote operation or standby state.

Alarm mute is available for 8 hours of operating time. When muted, the alarm remains hidden temporarily and the system returns to normal alarm display after the mute period ends. If the unit is turned off during the mute window, the remaining mute time continues when the unit is restarted.

For remote use, the system supports closed-contact and 1 to 30V AC or DC signaling through the remote cable connection. The unit can also provide run and fault status outputs to compatible equipment. A temporary on mode is available for short cleaning tasks when the system is in remote standby, allowing the local power button to briefly override the remote state.

Cleaning and Maintenance

The filters are not cleanable and must be replaced when they reach service limits. The bag filter is typically the first item to need replacement, while the HEPA filter is replaced when the service indicator stays solid. Access to both filters is from the filter-side panel on the right side of the unit.

To replace the filters, remove the side access panel, slide off the bag filter, remove the protective grill, and replace the HEPA filter with the correct part. After closing the access door and restoring power, reset the service alert through the control panel sequence.

Motor maintenance is also scheduled by the system. When the service motor alert appears, the motor brushes or motor assembly may be near the end of service life. Replace the motor as needed, reinstall it in the correct bracket orientation, and reset the motor alert afterward. The new motor should be run at low speed for about 15 minutes to help break it in.

Recommended replacement intervals are approximately every 3 months for the bag filter and every 6 to 18 months for the HEPA filter, depending on use and load.

Troubleshooting

• If the motor does not run and the lights are off, check the fuse and wiring.
• If the motor runs but the lights do not, the light may need replacement.
• If the lights work but the motor does not, the motor may be defective.
• If the unit will not start, check the power supply, fuse, receptacle connection, and breaker.
• If noise is excessive, inspect the blower wheel and motor bearings.
• If airflow is weak, look for obstructions or clogged filters.
• If the motor shuts off and restarts later, verify that a filter is installed and that input amperage is not too high.
• If airflow feels excessive, check that the filter is installed correctly.

Warranty

QUATRO Air Technologies warrants the equipment against defects in materials and workmanship for one year from the date of shipment under normal use and service. The warranty is limited to replacement of defective parts and does not extend to misuse, abuse, negligence, improper assembly, vandalism, acts of nature, unauthorized changes, non-approved parts, or operation outside the specified voltage.

The system must be used with the power connected continuously and switched only with the onboard on/off control. Damage caused by improper power handling or misuse is not covered. The equipment is also not intended for explosive, highly flammable, or toxic environments, and users are responsible for meeting applicable safety requirements.

Pros & Cons

• Pros: quiet operation, compact footprint, two-stage filtration, clear service alerts, remote-control support, and easy access for maintenance.
• Pros: Autoflow speed control helps maintain suction as filters load.
• Cons: filters are not washable and must be replaced on schedule.
• Cons: the system needs correct voltage, proper grounding, and unrestricted airflow to avoid faults.
• Cons: motor service and filter replacement are essential to prevent shutdown.