images?q=tbn:ANd9GcQc2AzQ-mzued6JDlr0leyr-6X9ylng4LEQcegDyyvWhKpEUcISrKWyPdAV4rFhGJNKUQ&usqp=CAU

Introduction of weBoost Home 4G Cellular Signal Booster

The weBoost Home 4G cellular signal booster is the perfect solution for anyone who experiences weak cell signal in their home or office. With an estimated price range of $300-$500, this product is designed to provide reliable and consistent coverage for all major carriers. The launch date for this product is set for early 2022, so keep an eye out for this exciting new release!

Package Contents

weboost-460020-Home-4G-Cellular-Signal-Booster- (1)

Antenna Kit Options

The following accessories are certiﬁ ed by the FCC to be used with the Connect 4G-X Booster.

INSIDE ANTENNA EXPANSION KITS

Kit 309900-50N

2- Wall Panel antennas
1- 50 ohm 3-Way Splitter

Kit 309905-50N

3 – Wall Panel Antennas
3- 2-Way 50 Ohm Splitters

Kit 309902-75F

2 – Wall Panel Antennas
1-3-Way 75Ohm Splitter

Kit 309903-75F

3 – Wall Panel Antennas
3- 2-Way 75Ohm Splitters

Kit 309904-75F

1 – Wall Panel Antenna
1- 2-Way 75 Ohm Splitter

Kit 301213

Desktop Antenna w/ 5’ RG174
INSIDE ANTENNAS

Kit 301121-40010

50 Ohm Dome Antenna
10’ LMR400

Kit 301151-0610

75 Ohm Dome Antenna
10’ RG6 Cable

Kit 311155-0630

75 Ohm Wall Mount Panel Antenna 30’ RG6 Cable

Kit 311135-5820

50 Ohm Wall Mount Panel Antenna 20’ RG58 Cable

Kit 311135-40060

50 Ohm Wall Mount Panel Antenna 60’ LMR400 Cable

Kit 301151-1110

75 Ohm Dome Antenna
10’ RG11 cable

Kit 311155-1150

75 Ohm Wall Mount Panel Antenna 50’ RG11 Cable

Kit 311155-40060

75 Ohm Wall Mount Panel Antenna 60’ LMR400 Cable

Kit 304412-40010

50 Ohm 4G Dome Antenna
10’ Wilson400 Cable

Kit 304412-5810

50 Ohm 4G Dome Antenna
10’ RG58 cable

Kit 304419-1110

75 Ohm 4G Dome Antenna
10’ RG 11 cable

Kit 304419-17410

75 Ohm 4G Dome Antenna
10’ RG174 cable
*May need separate adapter

Kit 304419-0610

75 Ohm 4G Dome Antenna
10’ RG6 cable
50 OHM OUTSIDE ANTENNA KITS

Kit 314453-5825

50 Ohm Pole Mount Panel Antenna 25’ RG58 Cable

Kit 314411-5825

50 Ohm Wide Band Directional 25’ RG58 Cable

Kit 301111-5850

Yagi Directional Antenna
50’ RG58 Cable

Kit 311129 – 5840

800 MHz Yagi Directional
40’ RG58 Cable

Kit 311203-5820

Omni-Directional Antenna
20’ RG58 Cable

Kit 311124-5830

1900 MHz Yagi Antenna
30’ RG58 Cable

Kit 314411-40075

50 Ohm Wide Band Directional 75’ LMR400 Cable

Kit 311203-40020

Omni-Directional Antenna
20’ LMR400 Cable

Kit 301111-400170

Yagi Directional w/ N-Female 170’ LMR400

Kit 311124 – 400100

1900 MHz Yagi Directional
100’ LMR400 Cable

Kit 311129-400100

800 MHz Yagi Antenna
100’ LMR400 Cable

Kit 314453-40075

50 Ohm Pole Mount Panel Antenna 75’ LMR400 Cable

Kit 304422-40020

50 Ohm 4G Omni Antenna
20’ Wilson400 cable

Kit 304422-5810

50 Ohm 4G Omni Antenna
10’ RG58 cable
* May need separate adapter

Kit 304422-1120

50 Ohm 4G Omni Antenna
20’ RG11 cable
* May need separate adapter
Mini-Mag
301126 w/ 12.5 RG174 cable- SMA
75 OHM OUTSIDE ANTENNA KITS

Kit 301111 – 0675

Yagi Directional Antenna
75’ RG6 Cable
N-Male to F-Female adapter

Kit 311201-0620

Omni Directional w/ F-Female 20’ RG6 Cable

Kit 311129-0660

800 MHz Yagi Directional
60’ RG6 Cable
N-Male to F-Female adapter

Kit 311124-0650

1900 MHz Yagi Directional
50’ RG6 Cable
N-Male to F-Female adapter

Kit 314473 -0640

75 Ohm Pole Mount Panel Antenna 40’ RG6 Cable
Kit 314475 – 0630
75 Ohm Wide Band Directional 30’ RG6 Cable

Kit 311141 – 0620

75 Ohm Grey Brick Antenna
20’ RG6 Cable

Kit 301111 – 11140

Yagi Directional Antenna
140’ RG11 Cable
N-Male to F-Female adapter

Kit 311201-1120

Omni Directional w/ F-Female 20’ RG11 Cable

Kit 311129-11110

800 MHz Yagi Directional
110’ RG11 Cable
N-Male to F-Female adapter

Kit 311124-1180

1900 MHz Yagi Directional
80’ RG11 Cable
N-Male to F-Female adapter

Kit 314473 -1175

75 Ohm Pole Mount Panel Antenna 75’ RG11 Cable
Kit 314475 – 1175
75 Ohm Wide Band Directional 75’ RG11 Cable

Kit 311141 – 1120

75 Ohm Grey Brick Antenna
20’ RG11 Cable

Kit 304421-1120

75 Ohm 4G Omni Antenna
20’ RG 11 cable

Kit 304421-17410

75 Ohm 4G Omni Antenna
10’ RG174 cable
* May need separate adapter Kit 304421-0610
75 Ohm 4G Omni Antenna 10’ RG6 cable

Kit 304421-5810

75 Ohm 4G Omni Antenna 10’ RG58 cable
* May need separate adapter

Speciﬁcations

Product Number	U470001
Model Number	460020
FCC ID:	PWO460020
IC	IC: 4726A-460020
Connectors	SMA-Female on the Inside Antenna / F-Female on the Outside Antenna
Antenna Impedance	50 Ohms / 75 Ohms
Frequency	698-716 MHz, 746-787 MHz, 824-894 MHz, 1850-1995 MHz, 1710-1755/2110-2155 MHz
Power output for single cell phone (Uplink) dBm	700 MHz Band17 23.94	700 MHz Band13 24.19	800 MHz Band 5 23.49	1700 MHz Band 4 24.55	1900 MHz Band 2 23.61
Power output for single cell phone (Downlink) dBm	700 MHz Band17 Band17 11.64	700 MHz Band13 Band13 11.92	800 MHz Band 5 12.1	2100 MHz Band 4 11.9	1900 MHz Band 2 9.5
Noise Figure	5 dB nominal
Isolation	> 110 dB
Power Requirements	AC / DC 5V, 4A, w/2.5×5.5mm Jack

The term “IC” before the radio certiﬁcation number only signiﬁes that Industry Canada technical speciﬁcations were met. Each Signal Booster is individually tested and factory set to ensure FCC compliance. The Signal Booster cannot be adjusted without factory reprogramming or disabling the hardware. The Signal Booster will amplify, but not alter incoming and outgoing signals in order to increase coverage of authorized frequency bands only. If the Signal Booster is not in use for ﬁve minutes, it will reduce gain until a signal is detected. If a detected signal is too high in a frequency band, or if the Signal Booster detects an oscillation, the Signal Booster will automatically turn the power off on that band.

Preparation

You Will Need (tools not included)
Make sure the following materials are prepared and ready for your installation.

1 to 2 hours
2 people (a person to help with antenna calibration)
Ladder
Phillips-head screwdriver
10mm open-end wrench or adjustable wrench
Drill (if routing cable through wall)
1.25”-2” diameter pole existing pole (or order #901117)
Recommended: Power Strip with surge protection

NOTE: These instructions will walk you through a “soft” install process to ﬁ nd the optimal locations for the inside and outside antennas, then through the process of the permanent installation.

weBoost Home 4G Cellular Signal Booster Detailed Description

The weBoost Home 4G is a powerful signal booster that can improve your cell signal by up to 32x. It is compatible with all major carriers, including Verizon, AT&T, T-Mobile, and Sprint. This product is capable of boosting signal for multiple devices at once, making it a great option for large families or small businesses. The booster comes with an outdoor antenna, indoor antenna, and power supply, and is easy to install and set up. With a sleek and modern design, the weBoost Home 4G will blend seamlessly into any home or office decor.

Connect Inside

Antenna To Booster
Connect Inside Antenna cable to the bottom port on Home 4G booster labeled ‘INSIDE’ and place Inside Antenna in weak signal area at least 18 inches away from booster.

NOTE: Do not connect booster to power until the system is fully installed.

weboost-460020-Home-4G-Cellular-Signal-Booster- (5)

Point Outside Antenna Toward Nearest Cell Tower

Point the Outside Antenna toward the nearest cell phone tower. To ﬁ nd the nearest tower, use an app such as ‘Open Signal’. This is the most critical step of the installation process because it will determine the overall performance of the booster system.

NOTE: The Outside Antenna must be at least 50 feet horizontal or 20 feet vertical from the Inside Antenna for best performance. Make sure the Inside Antenna and Outside Antennas are setup so they are facing away from each other.

weboost-460020-Home-4G-Cellular-Signal-Booster- (7)

Mount Bracket To Outside Antenna

Pole Mounting and Wall Mounting Options are included. The pole mounting option is preferred because it would be easier to adjust to the direction of the cell tower.
Attach the L-Bracket to the Outside Antenna and use the U-Bolts/Pole Bracket to attach the L-Bracket to a pole.

weboost-460020-Home-4G-Cellular-Signal-Booster- (8)

NOTE: Mounting on existing roof exhaust pipe would be a good time-saver option.

weboost-460020-Home-4G-Cellular-Signal-Booster- (9)

weboost-460020-Home-4G-Cellular-Signal-Booster- (10)

Route & Connect Cable To System

Connect the white RG-6 Cable to Outside Antenna and route cable into the home. All connections should be hand tightened only.

weboost-460020-Home-4G-Cellular-Signal-Booster- (11)

A Window Entry Cable is provided to help make cable entry easier. Route cable to the Home 4G booster and connect to top port labeled ‘OUTSIDE’.

weboost-460020-Home-4G-Cellular-Signal-Booster- (12)

Power Up The Booster & Optimize The System

Plug the Power Supply into wall outlet then connect to Home 4G Booster and enjoy your boosted cell signal!

weboost-460020-Home-4G-Cellular-Signal-Booster- (13)

After powering up your system, you are now ready to optimize your system. Rotate the Outside Antenna in 1/4 turn increments (within the cell towers general location) and each time observing the signal level on your cell phone from the inside antenna’s projected area.

weboost-460020-Home-4G-Cellular-Signal-Booster- (14)

Measuring Booster Performance

How To Get Signal Strength As A Number

iPhone
Dial *3001#12345#* then press Call.

Hold down power button until you see ‘Slide to Power Off ‘.
Then release the power button.
Hold the Home button until your main screen appears.

If you want to check 3G/1x but your iPhone is picking up 4G/LTE signal, go to Settings>Cellular>Cellular Data Options>En-able LTE>Select Off . After you system is set up, you can go back to the dots signal by once again dialing *3001#12345#* then pressing call. When the menu comes back up, tap “phone” in the top left corner of your phone.

iPhone iOS 11 current iOS 11 no longer displays the decibel (dBm) reading in ‘Field Test Mode’.

Tip: Using the bar indicator on your cell phone can assist you in ﬁnding the strongest signal direction as well as placing calls in diff erent locations. Android Settings > About Phone > Status or Network > Signal Strength or Network Type and Strength (exact options/wording depends on phone model). iPhone is a registered trademark of Apple Inc. Android is a trademark of Google Inc.

All Other Phones & Alternate Methods
Go to https://www.weboost.com/blog/how-to-test-signal-strength-on-your-phone

Compare Results
Having an accurate measurement of signal strength in decibels (dBm) is crucial when installing your system. Decibels accurately measure the signal strength you are receiving.

weboost-460020-Home-4G-Cellular-Signal-Booster- (15)

DID YOU KNOW a signal increase of just 3dB is 2 times the power and signal ampliﬁ cation!

weboost-460020-Home-4G-Cellular-Signal-Booster- (16)

Light Patterns

weboost-460020-Home-4G-Cellular-Signal-Booster- (17)

Solid Green
This indicates that your boo isis functioning properly and th are no are no issues with installation.
Blinking Green, Then Red
Band has reduced gain. This indicates that one or more of the booster bands has reduced power due to a feedback loop condition called oscillation. This is a built in safety feature to prevent harmful interference with a nearby cell tower. If you are already experiencing the desired signal boost, then no further adjustments are necessary. If you are not experiencing the desired boost in coverage then refer to the Troubleshooting section.
Solid Red
Band has shutoff. This is due to a feedback loop condition called oscillation.
This is a built in safety feature that causes a band to shut off to prevent harmful interference with a nearby cell tower. Refer to Troubleshooting section.
Blinking Green, Orange
Band has reduced gain. This indicates that one or more of the booster bands has reduced power due to overload from nearby cell tower. This is a built in safety feature to prevent harmful interference with a nearby cell tower. If you are already experiencing the desired signal boost, then no further adjustments are necessary. If you are not experiencing the desired boost in coverage then refer to the Troubleshooting section.
Solid Orange
Band has shut off due to overload from nearby cell tower. Outside Antenna must be adjusted. Refer to Troubleshooting section.
Light Off
If the Signal Booster’s light is off, verify your power supply has power.

Setup Guide

Setting up the weBoost Home 4G is a simple and straightforward process. First, locate a spot outside your home or office where you have a strong cell signal. Attach the outdoor antenna to a pole or wall using the included mounting hardware. Then, run the coaxial cable from the outdoor antenna to the booster, which should be placed in a central location inside your home or office. Connect the power supply and turn on the booster. Finally, place the indoor antenna in a location where you want to improve your cell signal. The booster will automatically adjust to provide the best possible signal in your area.

Safety Guidelines

To uphold compliance with network protection standards, all active cellular devices must maintain at least six feet of separation distance from Inside Panel and Dome antennas and at least four feet of separation distance from desktop Antenna.
Use only the power supply provided in this package. Use of a non-weBoost product may damage your equipment.
The Signal Booster unit is designed for use in an indoor, temperature-controlled environment (less than 100 degrees Fahrenheit). It is not intended for use in attics or similar locations subject to temperatures in excess of that range.

RF Safety Warning: Any antenna used with this device must be located at least 8 inches from all persons.
AWS Warning: The Outside Antenna must be installed no higher than 10 meters (31’9”) above ground.

This is a CONSUMER device.
BEFORE USE, you MUST REGISTER THIS DEVICE with your wireless provider and have your provider’s consent. Most wireless providers consent to the use of signal boosters. Some providers may not consent to the use of this device on their network. If you are unsure, contact your provider.
In Canada, BEFORE USE you must meet all requirements set out in ISED CPC-2-1-05.
You MUST operate this device with approved antennas and cables as speciﬁed by the manufacturer. Antennas MUST be installed at least 20 cm (8 inches) from (i.e., MUST NOT be installed within 20 cm of) any person.
You MUST cease operating this device immediately if requested by the FCC (or ISED in Canada) or licensed wireless service provider.
WARNING. E911 location information may not be provided or may be inaccurate for calls served by using this device.
This device may be operated ONLY in a ﬁxed location (i.e..may operate in a ﬁxed location only) for in-building use.

Troubleshooting

IF YOU ARE HAPPY WITH THE COVERAGE, THESE LIGHT ISSUES DON’T HAVE TO BE RESOLVED. YOUR CARRIER’S BAND HAS NOT BEEN AFFECTED.

FIXING ANY RED LIGHT ISSUES
This involves Solid Red & Blinking Green/Red lights.

Verify Outside Antenna faces away from the Inside Antenna. Un-plug and re-plug in power supply.
Verify the Inside Antenna is at least 18” from the Booster and pointed away from the Booster. Unplug and re-plug in power supply.
Tighten all cable connections (be sure to handtighten only, do NOT use tools). You may want to undo and redo the connection completely. Unplug and re-plug in power supply.
Increase the distance (horizontally or vertically) between the Outside and Inside antenna. Add included cable if needed. Un-plug and re-plug in power supply.

FIXING ANY ORANGE LIGHT ISSUES
This involves Solid Orange & Blinking Green/Orange lights.

Outside Antenna must be adjusted. Wait 10 seconds between adjustments for the lights to reset.

Pole Mount Option: Rotate the Outside Antenna away from the strongest cellular signal in small increments (45°) until the light turns green. Unplug and re-plug in power supply.
Wall Mount Option: Change mount location. Move the Outside Antenna to a wall outside the building to see if the lights turn green. Un-plug and re-plug in power supply

Warranty

weBoost Signal Boosters are warranted for two (2) years against defects in workmanship and/or materials. Warranty cases may be resolved by returning the product directly to the reseller with a dated proof of purchase.

Pros & Cons

Pro: Improves cell signal by up to 32x
Pro: Compatible with all major carriers
Pro: Can boost signal for multiple devices at once
Pro: Easy to install and set up
Con: Higher price point compared to some competitors
Con: May not work well in areas with extremely weak signal

Customer Reviews about weBoost Home 4G Cellular Signal Booster

Customers who have purchased the weBoost Home 4G have been overwhelmingly positive about their experience. Many have reported significant improvements in their cell signal, and have been impressed with how easy the booster is to install and use. Some common complaints include issues with the outdoor antenna not picking up a strong enough signal, and the higher price point compared to some competitors. However, the vast majority of customers have been satisfied with their purchase and would recommend the weBoost Home 4G to others.

Search Manuals in: signal-booster

Read More

Read More