Introduction of Usha MG-2853 Smash Mixer Grinder

The Usha MG-2853 Smash Mixer Grinder is a powerful and efficient kitchen appliance that is designed to make food preparation easier and faster. This mixer grinder is perfect for grinding spices, blending juices, and making smooth pastes. With its sleek and compact design, it will fit perfectly in any modern kitchen. The estimated price of the Usha Smash Mixer Grinder MG-2853 is around INR 3,000 to INR 3,500, and it is now available in the market.

Technical Specifications

Description

The Usha MG-2853 Smash Mixer Grinder is a versatile and reliable kitchen appliance that can handle a variety of food preparation tasks. Its powerful motor and sharp blades make it perfect for grinding spices and making chutneys. The large jars are ideal for blending juices and making smoothies. This mixer grinder also features a pulse function that allows you to control the grinding process, ensuring that you get the perfect texture every time. With its elegant design, this mixer grinder is sure to add a touch of style to any kitchen.

IDENTIFICATION OF PARTS

BASIC UNIT

1. Basic Unit

2. Speed Switch with pulse

3. Overload Switch

4. Cord Plug

5. Spatula

BLENDING JAR (large)

1. Blending / Whipping Jar Assembly

2. Shaft Katori

3. Lid 1500 ml Jar

4. Ring Blender Jar

5. Coupler

6. Wet Grinding Blade

GRINDING JAR (medium)

1. Dry Grinding Jar Assembly

2. Dry Grinding Jar lid

3. Dry Grinding Rubber Ring

4. Dry Grinding Blade

SMALL QTY. GRINDING JAR (Small)

1. Small Dry Grinder Jar Assembly

2. Blade / Shaft Assembly

3. Small Jar lid

4. Small Rubber Ring

5. Blade Knob

How to Fit Jars

Hold the jar in one hand and check if the blade moves freely and rotates. Place ingredients in the Steel Jar. Cover the Jar with dome/lid. Place the jar on the basic unit, press it slightly downward and then turn it clockwise to lock it in the top body socket. Plug in, support cover gently by hand and switch on using the slowest speed (position 1 of switch) and then moving on to higher speeds as per requirements (position 2, 3 of switch). Switch off after operation. For unlocking the jar, press the jar downward, then turn it anti-clockwise and lift the jar from the basic unit.

How to Use Your Usha MG-2853 Smash Mixer Grinder

Usage of Control Panel

The control panel is a 3-speed rotary switch with an inbuilt 4” inching position for whipping operation. For Whipping, turn the rotary switch in the anti-clockwise direction. For the usage of the control panel, refer to the following table/figures.

How to Fix the Blades

To fit the blade, hold the jar coupler on the underside of the jar with one hand and hold the plastic nut of the blade with the spanner (provided on the handle of spatula). Tighten by rotating the plastic nut anti-clockwise, till the blade is firmly locked.

Overload Protector

Your mixer grinder is protected against sudden overload. In case such a situation does occur, your MG will automatically trip off and the overload indicator will be ‘ON’ and hence protect the motor. To restart the machine, please wait for 2-3 minutes to allow the motor to cool down and also remove the cause of overload. The red button of the circuit breaker switch located on the back side of the control panel mixer grinder has to be pressed for reoperation.

Important Notes

1. Please note that initial empty running of jars will throw out some oil impregnated in bushes. Therefore, it is advised to thoroughly clean it before actual use.

2. Blending/liquidizing operation should be done at the first speed only. In case a higher speed is used, then chances are that the lid may fly off.

3. Turmeric grinding should be done in medium & small jars only. For this, break turmeric into small pieces before grinding.

4. Before starting the machine for the first time after a long gap:

   • Rotate the motor shaft by hand through the coupler so that it works smoothly.

   • After connecting, run the machine at speed 1 for a few seconds to ensure that the motor works properly.

   • Before fixing the stainless steel jar on the basic unit, rotate the jar shaft by hand to make sure that it turns freely.

Setup Guide

Setting up the Usha MG-2853 Smash Mixer Grinder is a simple and straightforward process. First, make sure that the mixer grinder is unplugged. Then, attach the jars to the base by aligning the tabs on the jars with the slots on the base. Once the jars are securely in place, plug in the mixer grinder and select the desired speed setting. Finally, add the ingredients to the jar and start grinding.

Cleaning of Stainless Steel Jars

• To prevent the shaft from getting stuck, once in a fortnight fill about half jar with lukewarm water and add a little mild detergent (do not use abrasive cleaning powders since these will scratch the jar) and put on the cover and stopper. 

• Switch on the motor and run it at the lowest speed for about 30 seconds. This clears out particles sticking under the blade. 

• To remove blade assembly, gently unscrew in a clockwise direction. 

• Cleaning instructions for Dry Grinding Jar & Chutney Jar are the same.

Important Precautions

DO'S

• Place your MG at a convenient height so that you can operate it easily. You should be able to look down into the attachments to check the circulation of ingredients.

• Clear out some space around the machine. You will need it for keeping various items required while operating the MG.

• Keep the MG away from direct heat or sun.

• In dry grinding, friction may heat up the jar. It has nothing to do with the motor, so do not worry.

• Remember MG operates at optimum efficiency at the specified voltage only. Wide voltage fluctuations during operation may affect the quality of grinding even though the motor may still be safe. If your area faces such periodic fluctuations and if you cannot get a voltage stabilizer try to operate the machine during steadier voltage stretches.

• Hold down the jar cover lightly with your hand while the mixer is in operation.

DON’TS

• Do not run the machine unless the jar is in position. Lids too should be firmly placed.

• Do not allow children to handle MG.

• Do not burden the motor with loads heavier than those specified in the instructions.

• Do not run MG without any load.

• MG should not run for more than 30 minutes at a stretch normally. Stop for 10 minutes before starting again. When hot air comes out of the ventilator, switch it off for a while.

• Your MG cannot substitute for a storage container. So avoid storing food in the jar.

• Never lay any thin plastic sheet or cloth under the basic unit. It may get sucked up and block ventilation holes in the base.

• Blades should not be left inside the jar.

• Do not grind sugar in your MG. It may cause damage to the MG motor.

• Do not attempt to repair MG at home or allow any unauthorized person to do it either. In the event your MG needs attention, contact Usha Care.

Troubleshooting

If the mixer grinder is not working, make sure that it is plugged in and that the power switch is in the "on" position. If the mixer grinder is still not working, check to see if the jars are securely attached to the base. If the motor is running but the blades are not turning, there may be a problem with the blades or the motor. In this case, it is recommended to contact Usha's customer service department.

WARRANTY Card

This appliance is warranted for 2 years on product against all manufacturing defects from the date of sale.

Usha MG-2853 Smash Mixer Grinder Pros & Cons

Pros

• Powerful 500-watt motor
• Three stainless steel jars with a capacity of 0.5 liters, 1 liter, and 1.5 liters
• Overload protection system
• Safety lock system
• Elegant design

Cons

• May be too loud for some users
• Blades may dull over time