Xiaomi 10000mAh Mi Power Bank 2S User Manual | Specifications

cover-image

Content

Introduction of Xiaomi 10000mAh Mi Power Bank 2S

The Xiaomi 10000mAh Mi Power Bank 2S is a high-capacity portable charger that offers fast and efficient charging for your devices. Its sleek and compact design makes it perfect for travel, work, or everyday use. With a price range of around $20 to $30, this power bank is an affordable solution for keeping your devices charged on-the-go. The Mi Power Bank 2S was launched in 2019 and has been a popular choice among consumers ever since.

Specifications

  • Model: PLM09ZM
  • Battery type: Li-polymer battery
  • Capacity: 10000mAh 3.7V (37Wh) 
  • Rated capacity: 6500mAh 5.1V (TYP 1A)
  • Operating temperature: 0°C~40°C 
  • Dimensions: 147 × 71.2 × 14.2 mm
  • Input port: Micro-USB Output port: USB-A
  • Input: 5.0V 2.0A/9.0V 2.0A/12.0V 1.5A
  • Output: Single port 5.1V 2.4A/9.0V 1.6A MAX/12.0V 1.2A MAX
  • Dual ports 5.1V 2.4A (15W MAX)
  • Charging time: approx. 3.5 hrs (9V/2A or 12V/1.5A adapter, standard cable); approx. 5.5 hrs (5V/2A adapter, standard cable)

Note

  1. Make sure your Mi Power Bank is fully charged on its first use.
  2. When charging a device with Mi Power Bank, make sure your device displays the battery charging icon and the Mi Power Bank is working properly.
  3. When recharging Mi Power Bank or charging a device with Mi Power Bank, make sure you use a standard charging cable.
  4. If all indicators go off when charging a device with Mi Power Bank, recharge your Mi Power Bank shortly.
  5. When charging a device with Mi Power Bank, the device will use Mi Power Bank's power first. Disconnect Mi Power Bank to avoid further discharge once your device is fully charged. When Mi 
  6. Power Bank enters protection mode (LEDs remain off after pressing the Power Check button) due to short circuit or other reasons, charge it with an external charger to resume.

Warning

  • Mi Power Bank contains Li-ion battery cell. Do not open the casing to avoid cell damage or other hazards.
  • Do not dismantle, crush, puncture and short circuit Mi Power Bank, or expose it to liquids, fire or environments where the temperature is above 60°C (140°F).

Xiaomi 10000mAh Mi Power Bank 2S Product Overview

Thank you for choosing 10000mAh Mi Power Bank 2S.  This product is a high-capacity portable charger that uses Li-polymer battery, charge and discharge chip for a safe, efficient, and compatible user experience.

xiaomi_10000mah_mi_power_bank_2s.product_overview.png
  • The Power Check button is not a Power button. 
  • 10000mAh Mi Power Bank 2S detects charging and discharging automatically. 
  • The Power indicator goes off 2 minutes after fully discharged.
  • Safety: Mi Power Bank has multiple safeguard technologies to provide over-charge, over-discharge, high temperature, and short circuit protection in all working conditions.
  • Efficiency: Supports fast charging at 5.1V/2.4A, 9V/1.6A, 12V/1.2A only one output port used. The total power can be up to 15W when two output ports used together, at 5.1V/2.4A maximum output for each one.
  • Compatibility: The product has a built-in USB charging controller, compatible with most smartphones, tablets, and devices. It supports mainstream fast charging devices and can boost up to 9V/12V. Quality: Li-polymer battery, charge and discharge chip.

Description

The Xiaomi 10000mAh Mi Power Bank 2S has a high-density lithium-polymer battery that can charge a variety of devices, including smartphones, tablets, and laptops. It has two USB ports that support fast charging, allowing you to charge two devices at once. The power bank also has a low-power mode for charging smaller devices, such as wireless earbuds and fitness trackers. The Mi Power Bank 2S has a premium metal finish, making it both durable and stylish. It also has a convenient LED indicator that shows the battery level.

Charging

  • Connect with Mi Power Adapter to charge Mi Power Bank.

The indicator shows charging conditions as follows:

Power level

LED1

LED2LED3

LED4

0-25%

Blinking

OffOff

Off

25-50%

On

BlinkingOff

Off

50-75%

On

OnBlinking

Off

75-99%

On

OnOn

Blinking

Fully charged

On

OnOn

On

Charging error

Blinking

BlinkingBlinking

Blinking

xiaomi_10000mah_mi_power_bank_2s-charging.png

Discharging

Connect with Mi Power Bank to charge your device.

The indicator shows discharging conditions as follows:

Power level

LED1

LED2

LED3

LED4

Undervoltage

Off

Off

Off

Off

0-25%

Blinking

Off

Off

Off

25-50%

Blinking

Blinking

Off

Off

50-75%

Blinking

Blinking

Blinking

Off

75-100%

Blinking

Blinking

Blinking

Blinking

Low-current discharge
When Mi Power Bank is not charging, double press the Power Check button to enter low-current discharge mode to charge small devices, such as Bluetooth headphones and smart bands. The indicator LEDs will turn on one by one in succession, indicating that Mi Power Bank is in low-current discharge mode. To exit low-current discharge mode, press the Power Check button.

Setup Guide of Xiaomi 10000mAh Mi Power Bank 2S

To use the Xiaomi 10000mAh Mi Power Bank 2S, follow these steps:

  1. Charge the power bank using the included micro-USB cable.
  2. Connect your device to the power bank using a USB cable.
  3. Press the power button to start charging.
  4. To charge two devices at once, connect them both to the USB ports and press the power button.
  5. To enable low-power mode, press and hold the power button for a few seconds until the LED indicator starts flashing.

Troubleshooting

If you experience any issues with the Xiaomi 10000mAh Mi Power Bank 2S, try the following solutions:

  1. Device not charging: Make sure the USB cable is properly connected to both the power bank and the device. Try using a different USB cable or a wall charger to rule out any issues with the cable or outlet.
  2. Power bank not turning on: Make sure the power bank is fully charged. If the power bank still won't turn on, try resetting it by pressing and holding the power button for 10 seconds.
  3. LED indicator not working: If the LED indicator is not showing the battery level, try charging the power bank for a few hours. If the issue persists, contact Xiaomi customer support.

Xiaomi 10000mAh Mi Power Bank 2S Pros & Cons

Pros

  • High-capacity battery (10000mAh)
  • Fast charging (up to 18W)
  • Dual USB ports
  • Premium metal finish
  • Low-power mode for smaller devices

Cons

  • No USB-C port
  • Micro-USB charging cable not included
  • Long charging time (around 5-6 hours)
  • Can't charge laptops with USB-C ports

Customer Reviews

Customers have praised the Xiaomi 10000mAh Mi Power Bank 2S for its high capacity, fast charging, and compact design. The power bank has received an average rating of 4.5 out of 5 stars on various e-commerce websites. Common complaints include the lack of USB-C port and the long charging time.

Faqs

For the first time, how do I charge my Xiaomi 10000mAh Mi Power Bank 2S?

Using the supplied cable, insert the Xiaomi 10000mAh Mi Power Bank 2S power bank into a USB charger. Before using it for the first time, it is advised to fully charge it. The charging process begins automatically.

Which gadgets can I use the Xiaomi 10000mAh Mi Power Bank 2S to charge?

Digital cameras, tablets, smartphones, and other USB-charged Xiaomi 10000mAh Mi Power Bank 2S devices can all be charged. The characteristics of the gadget determine compatibility.

How many times can I charge my phone with the Xiaomi 10000mAh Mi Power Bank 2S?

Depending on the Xiaomi 10000mAh Mi Power Bank 2S capacity of your phone's battery. When efficiency losses are taken into account, a 10000mAh power bank can roughly charge a 3000mAh phone battery two to three times.

I have a Xiaomi 10000mAh Mi Power Bank 2S. Can I charge it while it's charging?

It is possible to charge devices using pass-through charging with the Xiaomi 10000mAh Mi Power Bank 2S while it is charging itself.

What are the Xiaomi 10000mAh Mi Power Bank 2S's input and output specifications?

The micro-USB connector of the Xiaomi 10000mAh Mi Power Bank 2S accepts 5V/2A or 9V/12A input. It supports fast charging by providing 5.1V/2.4A, 9V/1.6A, or 12V/1.2A for output through its USB ports.

How long does the Xiaomi 10000mAh Mi Power Bank 2S take to charge completely?

Depending on the charger being used, charging times vary. The Xiaomi 10000mAh Mi Power Bank 2S can be fully charged in approximately 4.2 hours using an 18W charger.

What does it indicate when the Xiaomi 10000mAh Mi Power Bank 2S's LED lights flash when it's charging?

The Xiaomi 10000mAh Mi Power Bank 2S is presently charging as indicated by blinking LED lights. The current charge level is shown by the number of lights on.

Is it allowed to travel with the Xiaomi 10000mAh Mi Power Bank 2S?

Yes, the capacity of the Xiaomi 10000mAh Mi Power Bank 2S is within the airline-permitted maximum range (sometimes up to 100Wh) for carry-on luggage. However, as rules might change, please confirm with your particular airline.

Why won't my Xiaomi Mi Power Bank 2S (10000mAh) charge to the fullest extent possible?

To get peak performance, a Xiaomi 10000mAh Mi Power Bank 2S that is brand-new might need to be charged many times. As is typical with lithium batteries, the battery capacity may gradually decrease if it is older.

If I'm not going to be using my Xiaomi 10000mAh Mi Power Bank 2S for a long time, how should I store it?

With the Xiaomi 10000mAh Mi Power Bank 2S at 50–60% charge, store it in a cool, dry location. Every three to six months, recharge it to keep the battery healthy.

Metal Effects Copper Paint MDM-09 Guide

Cool Boxes MB40-DC

Leave a Comment

Name

Email

Comment