Boat 281 Airdopes Twin Earbuds Instruction Guide
Content
Introduction of Boat 281 Airdopes Twin Earbuds
Introducing the Boat 281 Airdopes Twin Earbuds - the perfect wireless solution for all your audio needs. With a sleek and stylish design, these earbuds are not only easy on the eyes but also come with a range of features to enhance your listening experience. The estimated price of the Boat 281 Airdopes Twin Earbuds is around $50, and they are set to launch in the summer of 2023.
In the box
1x Pair og Ear-buds
1x Charging Case
2x Pair of Ear Caps
1x Charging Cable
1x User Manual
Specifications
Bluetooth Version | V5.0 |
Water Resistance | IPX5 |
Music Playtime | Up to 5 Hours |
Standby Time | 150 Hours |
Transmission Range | 10m |
Driver Size | 6mm |
Bluetooth Profile | HFP, HSP, SPP, AVRCP, A2D |
Frequency | 20Hz-20kHz |
Batter Earbuds | 40mAh ‘2 |
Battery Charging Case | 420mAh |
Charging Time | 1 Hour |
Earbuds’Weight | 442g |
Charging Case Weight | 41g |
Power On
(First Time User)
To automatically switch the earbuds on (Smart Power On) simply take them out from the charging case
To manually switch the earbuds on (Manual Power On), long touch the Capacitive Touch Control (*CTC) for 3 seconds on both Left and Right earbuds for switching them on until the LED light begins to flash in blue
Both the earbuds will automatically pair with each other. The earbuds will enter into the Connection Mode, indicated by alternating blue and red LED flashes.
Connection Mode
Turn on the Bluetooth functionality on your phone/media device and scan
Search for ‘Airdopes 281’ and pair accordingly. Enter ‘0000’as the passkey if asked.
Note
Pairing mode lasts for 180 seconds. if the pairing time is missed then you will need to reconnect the earbuds and follow the above mentioned procedure
Airdopes 281 remembers previously connected devices; once switched on, the earbuds automatically reconnect to the previously connected devices.
LED Indicators
2 Seconds
Long Press CTC on either earbud for 2 Seconds to activate Voice Assistant. / Reject incoming Calls.3 Seconds
Manual Power ON: Blue/Red Lights will Blink.5 Seconds
Scan Mode: Manual Power OFF Red Lights will Blink.5 Seconds
Factory Reset: Put the earbuds inside (While Earbuds case and Long Press CTC for 5 second Inside Case) Blue/Red Lights will Blink on both Earbuds.
NOTE: Factory Reset will remove all device profiles saved on the Airdopes 281
Description
Boat 281 Airdopes Twin Earbuds are designed to provide a comfortable and secure fit, with multiple sizes of ear tips to choose from. The earbuds are lightweight and compact, making them ideal for use during sports and other activities. The touch controls allow you to easily control your music and answer calls, while the integrated microphone ensures clear and crisp audio during calls.
Single Earbud Usage
Please note that both the earbuds can be used in mono mode. Use either of the two options; Smart Power On or Manual Power On for switching on the desired earbud
The selected earbud will automatically enter the connection mode indicated by alternating blue and red
LED flashes
Turn on Bluetooth on your phone/media device and search for’Airdopes 281’to connect.
Notes
To switch to Stereo mode, simply take out the other earbud from the case. It will automatically power on and pair with the previously selected earbud, hence enabling Stereo usage
You cannot skip tracks or return to the previous tracks in Mono mode.
Charging The Earbuds
Please insert the earbuds back inside the charging case in correct orientation.
A red LED will indicate that the earbuds are being charged. Once fully charged the LED turns off. Step 3: Once the earbuds are fully charged, the charging case automatically switches off to save power.
Charging The Case
To charge the case, plug one end of the Type-C cable into the case and connect the other end to a computer or a wall adapter.
The LED lights located on the charging case indicate the battery status of the case. The indicator in the case blinks red in colour during charge. When the case has been charged fully the red light gets steady.
Basic Functions
Voice Assistant: Long touch the CTC on either earbud for 2 seconds to activate the voice assistant
Answer/Hang Up Call: Single tap the CTC on either earbud to answer an incoming call and once again to hang up an ongoing call
Reject Call: Long touch the CTC on either earbud for 2 seconds to reject incoming calls
Play/Pause Music: Single tap the left/right earbuds CTC once to play or pause a song
Next Track: When playing music, double tap the right earbuds CTC to skip to the next song
Previous Track: When playing music, double tap the left earbuds CTC to return to the previous song
Note: Volume cannot be controlled via earbuds and can only be adjusted via phone/media device
Voice Assistant
Long Press the CTC on either earbud for 2 seconds to activate the voice assistant
The respective voice assistant screen pops up and you may place your commands at ease
Tips: You may try out the following commands,
“What id the weather?”
“Play a song”
“Where are Pyramids located?
Setup Guide
Setting up the Boat 281 Airdopes Twin Earbuds is easy. Simply remove the earbuds from the charging case and turn them on. The earbuds will automatically enter pairing mode, and you can connect them to your device by selecting "Boat Airdopes Twin 281" in the Bluetooth settings. Once connected, you can start using the earbuds to listen to your favorite music or take calls.
Smart Power Off
After usage, remove both the earbuds from your ears
Place the earbuds back into the charging case in correct orientation
The earbuds will automatically switch off (and enter into charging mode)
Manual Power Off
Long touch the CTC on either earbud for 5 seconds until the red indicator light blinks before earbuds getting turned off, in order to manually switch off the earbuds. Please note that this powers off both the earbuds
Please keep the earbuds back into the charging case to charge the earbuds
Boat 281 Airdopes Twin Earbuds Factory Reset
Perform the Factory Reset in case you face any difficulty while operating your Airdopes 281
Put the earbuds back inside the charging case in correct orientation; the red LED gets steady indicating they are being charged
Try to push the earbuds lightly inside the charging case and hold them in correct orientation to keep them steady and in place; then keeping them in place, triple tap the CTC on both the earbuds. LED flashes red twice and then red LED is steady.
Take out both the earbuds from the case, LEDs start flashing in blue until both the earbuds’ LED flash blue & red.Then double tap the CTC on both earbuds, blue LED flashes twice then turns into steady blue. This indicates that the left and right earbuds are ready to pair with each other
Once the right earbud’s LED flashes in blue & red, it indicates that both the earbuds have successfully paired with each other 5.
Common Problem with Solution
If only one earbud is functioning: Simply insert the earbuds back into the case and take them out or perform the Factory Reset
If earbuds are not in scan mode: Simply insert the earbuds back into the case and take them out or perform the Factory Reset
Warning
Please follow the instructions to operate
Please charge the ear-buds according to the charging norms as mentioed on the packing & manual.
Please don’t use the ear-buds in extreme temperature
Please don’t water use the product near water
Please keep the product away form heat source as the heat may damage it
Don’t jam the ports such as charger port, LED port, etc. maximum volume in order to protect hearing and extend the ear-buds serviceslife
Advisable
The earbuds start at a 100% volume and it may need to be reduced when the earbuds are switch on at first .This can be done by using the volume control on the phone/media device.
Charging norms & Precautionary Guidelines
Charging /Brick/Adapter: 5V/2A
Cable/Wire: Standard Cable (35 Stands @0.10 mm diameter/strand)
Any other accessory can be paired up with the product as long as the specifications are as per above norms.
Boat 281 Airdopes Twin Earbuds Troubleshooting
Potential Problem | Solution |
If one earbud is not working | Perform the Factory Reset |
If earbuds are not in connection/scan mode | Perform the Factory Reset |
If earbuds disconnect during phone call | Charge the earbuds or perform the Factory Reset |
If there are other exceptions in usage | Place the earbuds back into the charging case and try using the gain or perform the Factory Reset |
Pros & Cons
Pros
- Comfortable and secure fit
- Long battery life
- Waterproof and sweatproof
- Integrated microphone for hands-free calling
- Easy to use touch controls
Cons
- No active noise cancellation
- No volume controls on the earbuds
Customer Reviews about Boat 281 Airdopes Twin Earbuds
"I love these earbuds! They are so comfortable and the sound quality is amazing. The battery life is also really impressive. Highly recommend!" - Sarah L.
"I've had these earbuds for a few weeks now and I have no complaints. They are easy to use and the touch controls are very responsive. The waterproof rating is a nice touch too." - Mark T.
Faqs
How do I pair my Boat 281 Airdopes Twin Earbuds with my device?
What is the battery life of the Boat 281 Airdopes Twin Earbuds?
How do I charge the Boat 281 Airdopes Twin Earbuds?
Are the Boat 281 Airdopes Twin Earbuds waterproof?
How do I reset my Boat 281 Airdopes Twin Earbuds?
How do I control music playback on the Boat 281 Airdopes Twin Earbuds?
How do I answer or end calls with the Boat 281 Airdopes Twin Earbuds?
What should I do if one Boat 281 Airdopes Twin Earbuds is not working?
How do I know when the Boat 281 Airdopes Twin Earbuds are fully charged?
Do the Boat 281 Airdopes Twin Earbuds support noise cancellation?
Leave a Comment