Edifier R20BT USB-Powered Speaker User Manual

Content

Edifier R20BT USB-Powered Speaker Manual

Introduction

The edifier R20BT USB-Powered Speaker is a compact 2.0 desktop speaker system designed for computers, laptops, tablets, and other everyday audio devices. It combines USB-powered operation with Bluetooth and AUX connectivity, making it suitable for workstations, bedrooms, study areas, and small entertainment setups.

Each speaker uses a 2.75-inch full-range driver and a flared bass-reflex port to deliver clear voice reproduction, music playback, video audio, and gaming sound in a small footprint. The system produces 2.5 watts RMS per channel and supports Bluetooth 6.0 with multipoint connection, allowing compatible devices to remain connected for convenient switching.

USB-C audio streaming provides a direct digital connection to supported computers, while AUX input offers a wired option for devices without Bluetooth or USB audio support. The attached USB cable supplies power when connected to a suitable USB power source. The speaker system also includes selectable source control and customizable light effects.

This Edifier computer speaker is best suited to users who want a simple desktop audio upgrade without a separate power brick. It is appropriate for online meetings, podcasts, background music, streaming, casual gaming, and general computer use. Users seeking room-filling bass, high-volume listening, or home-theater performance may need a larger powered speaker system or a dedicated subwoofer.

Edifier R20BT Specifications and Features

Speaker format: Two-channel 2.0 desktop speaker system.
Total output power: 5 watts RMS, rated at 2.5 watts per channel.
Drivers: Two 2.75-inch, 70 mm full-range drivers.
Frequency response: 73 Hz to 20 kHz.
Signal-to-noise ratio: At least 85 dB(A).
Audio inputs: Bluetooth, USB-C, and AUX.
Wireless standard: Bluetooth 6.0 with SBC codec support and multipoint connection.
Bluetooth frequency band: 2.402 GHz to 2.480 GHz.
USB audio: Direct USB-C audio streaming is supported on compatible Windows 7, 8, 10, and 11 computers.
Dimensions: Approximately 83 × 177.2 × 121.1 mm per speaker assembly specification.
Net weight: Approximately 1.40 kg.
Design features: Flared bass-reflex ports, USB-powered operation, source selection, and lighting effects.

How to Set Up the Edifier R20BT USB-Powered Speaker

USB and wired setup

Place the speakers on a stable, level surface with the drivers facing toward the listening position.
Connect the attached USB cable to a computer USB port or a suitable USB power adapter. Confirm that the power source can provide the required USB output.
For USB audio, connect the speaker to a compatible computer using USB-C. Select EDIFIER R20BT as the computer’s output device.
For AUX audio, connect a 3.5 mm audio cable to the AUX input and select AUX using the source control.

Bluetooth pairing

Power on the speaker. If no device is connected, the blue indicator should flash to show pairing mode.
Open Bluetooth settings on the phone, tablet, or computer.
Select EDIFIER R20BT from the available device list.
When pairing is complete, the blue indicator becomes steady. Hold the source button for approximately 1.5 seconds to enter pairing mode again when necessary.

To clear the Bluetooth pairing record, hold the source button for approximately 10 seconds. Keep the speaker away from liquids, excessive heat, blocked ventilation, and unstable surfaces. Use only a compatible USB power source, and reduce the volume before changing cables or input sources.

Edifier R20BT Troubleshooting Guide

No sound

Confirm that the USB cable is connected to a functioning power source.
Check the selected source and make sure the computer or mobile device is sending audio to the Edifier speaker.
Increase the speaker and source-device volume, then test another audio file or application.
For AUX use, make sure the plug is fully inserted into both devices.

Bluetooth will not connect

Move the source device closer to the speaker and disable Bluetooth on unused nearby devices.
Remove or forget EDIFIER R20BT in the device’s Bluetooth menu, clear the speaker’s pairing record, and pair again.
If another device is already connected, disconnect it before starting a new pairing attempt.

USB audio is unavailable

Reconnect the USB-C cable and try another computer USB port.
Check the operating system’s sound-output settings and select the speaker manually.
Restart the computer after reconnecting the speaker if the USB audio device is not detected.

The R20BT documentation does not identify user-facing numeric error codes; flashing or steady indicator behavior is used for connection status. Prevent recurring problems by keeping connectors clean, avoiding cable strain, and maintaining adequate ventilation. For warranty eligibility, service procedures, or model-specific support, contact Edifier through its official support channel at support@edifier.com or, in the United States, 1-877-EDIFIER.

Edifier R20BT Pros and Cons

Advantages

USB-powered design: A convenient choice for desks because it avoids a separate conventional power brick.
Multiple input options: Bluetooth, USB-C, and AUX support provide flexibility for computers, phones, tablets, and older audio sources.
Compact footprint: The narrow desktop form factor fits workstations where larger bookshelf speakers may be inconvenient.
Clear everyday playback: Full-range drivers are suitable for dialogue, meetings, podcasts, streaming, music, and casual gaming.
Modern wireless connectivity: Bluetooth 6.0 and multipoint support make switching between compatible devices easier than with basic wired-only computer speakers.

Limitations

Limited low-end extension: The published 73 Hz lower frequency limit is appropriate for general listening but cannot replace a subwoofer for deep bass.
Modest power output: Five watts RMS is designed for near-field desktop listening rather than large rooms or high-volume parties.
SBC Bluetooth codec: Wireless audio uses a standard codec instead of higher-bandwidth premium Bluetooth codecs.
USB dependence: The system requires a suitable USB power connection, so it is not intended as a fully battery-powered portable speaker.

The edifier R20BT USB-Powered Speaker is a strong fit for users who value compact size, simple installation, USB power, and versatile connectivity. Choose a larger powered speaker system if louder playback, stronger bass, or wider room coverage is the priority.

PDF

Faqs

How do I set up the Edifier R20BT USB-Powered Speaker for the first time?

Place the left and right speakers on a stable desk with the drivers facing you. Connect the attached USB-C cable to a compatible computer port for both power and USB audio, then select EDIFIER R20BT as the computer’s output device if it is not chosen automatically. For Bluetooth setup, press the input button, select EDIFIER R20BT in your phone or computer’s Bluetooth menu, and wait for the indicator to remain steady.

Why is my Edifier R20BT USB-Powered Speaker not producing sound through USB?

First, confirm that the USB-C cable is firmly connected and that the computer recognizes the speaker as an audio output. Open the operating system’s sound settings and manually select EDIFIER R20BT instead of the built-in speakers, monitor, or headset. Check the application’s separate volume control, mute status, and media playback. If available, test another USB port and restart the computer to refresh its audio-device detection.

How do I connect two devices to the Edifier R20BT USB-Powered Speaker using Bluetooth?

The Edifier R20BT supports Bluetooth multipoint, allowing two Bluetooth devices to remain connected. Pair the first phone, tablet, or computer normally, then place the speaker into Bluetooth pairing mode and connect the second device. Pause audio on one device before starting playback on the other to prevent competing signals. If pairing fails, remove EDIFIER R20BT from the device’s saved Bluetooth list and repeat the connection process.

Can I use the Edifier R20BT USB-Powered Speaker with a phone, laptop, or desktop computer?

Yes. The Edifier R20BT can connect to compatible computers through USB-C audio, to phones and laptops through Bluetooth, and to devices with a 3.5 mm headphone output through AUX. Bluetooth is convenient for wireless listening, while USB is useful for a computer desk because it carries power and audio through one cable. If a phone lacks a 3.5 mm jack, use Bluetooth or an appropriate audio adapter.

What should I do if the Edifier R20BT USB-Powered Speaker keeps disconnecting from Bluetooth?

Keep the source device reasonably close to the speaker and remove obstacles that may interfere with the wireless signal. Turn off Bluetooth on unused nearby devices, since multipoint connections can affect which source is active. Check that the phone or computer has sufficient battery, then disconnect and reconnect EDIFIER R20BT. If the problem continues, forget the speaker in Bluetooth settings, restart both devices, and pair them again.

How can I improve the sound quality of the Edifier R20BT USB-Powered Speaker on a desk?

Position both speakers at equal distances from your listening position, with the drivers aimed toward your ears. Keep them away from desk edges and avoid blocking the bass reflex ports. Use a solid surface to reduce vibration, and adjust the computer’s volume so it is not excessively low or heavily boosted. For clearer audio, disable unnecessary operating-system enhancements and use the source device’s equalizer sparingly.

Why does the Edifier R20BT USB-Powered Speaker sound distorted or crackle at high volume?

Distortion can occur when the computer, phone, or speaker volume is set too high. Reduce the source volume first, then raise the speaker level gradually until the sound is clear. Disable aggressive bass boost or equalizer settings, which can overload the compact full-range drivers. Check the USB or AUX connection for looseness, and test Bluetooth to identify whether the problem affects one input or every audio source.

How should I clean and maintain the Edifier R20BT USB-Powered Speaker?

Turn off or disconnect the speaker before cleaning. Wipe the cabinet with a soft, dry, lint-free cloth, and use a slightly damp cloth only for stubborn marks. Do not spray liquid onto the speakers, insert objects into the driver or bass port, or use solvents and abrasive cleaners. Keep the Edifier R20BT away from moisture, excessive heat, and direct sunlight, and avoid sharply bending or pulling its attached USB cable.