Introduction of Graco 5-in-1 Convertible Baby Crib

The Graco 5-in-1 Convertible Baby Crib is a versatile and stylish crib that offers a variety of uses as your child grows. It can be used as a traditional crib, toddler bed, daybed, and full-size bed. The crib is made with high-quality materials and features a sleek, modern design that will look great in any nursery. The estimated price of the Graco Convertible Crib is around $250, and it is currently available for purchase.

Detailed Specifications

The 5-in-1 Convertible Baby Crib is made with solid wood and MDF materials, and it measures 57.5 x 30.5 x 73.5 inches. The crib has four adjustable mattress height positions, and it can be converted to a toddler bed, daybed, and full-size bed (with the purchase of additional conversion kits). The crib also features stationary sides and meets all safety standards set by the ASTM and CPSC. The weight limit for the crib is 50 pounds.

PARTS LIST

Description

The Graco 5-in-1 Convertible Baby Crib is a great investment for any parent, as it can be used for many years as your child grows. The crib is easy to assemble, and the adjustable mattress height positions make it easy to customize for your child's needs. The crib is also designed with safety in mind, and it meets all safety standards set by the ASTM and CPSC. The crib has a modern and stylish design, and it is available in a variety of finishes to match any nursery decor. Whether you are looking for a traditional crib or a versatile bed that can grow with your child, the Graco 5-in-1 Convertible Crib is a great choice.

Setup of Graco Baby Crib

To set up the 5-in-1 Convertible Baby Crib, follow these steps

1. Unpack the crib and lay all the pieces out in a clean, flat area.
2. Assemble the crib frame using the provided hardware and instructions.
3. Install the mattress support using the provided brackets and screws.
4. Place the mattress on the mattress support and adjust the mattress height to the desired position.
5. Attach the stationary side panels to the crib frame using the provided screws and hardware.

Furniture Care Instructions

• Room Climate Control  
  Wood, when first cut contains more than 50 percent water. When it is prepared for furniture construction it is placed in a Kiln and the moisture content is brought down to 8 to 10 percent. Wood is porous and responds to its environment. If the room has high humidity it will absorb it and expand and if the humidity is low it will lose moisture and shrink.  
  It is important that the humidity levels in the room be controlled from extremes of too much humidity or too little. Furniture should not be placed close to air-conditioning outlets, fire places, radiators, space heaters, humidifiers or dehumidifiers. Exposure to extreme variations of temperature and humidity can damage any fine wood product.  
• The Ideal Environment for Fine Furniture 
  Fine wood furniture will have fewer problems when its environment is controlled at a temperature between 65 and 75 degrees and a relative humidity between 35 and 40 percent. Wood placed in an environment out side of those limits can and will shrink or expand and may develop some small cracks which are not material or structural defects. 
• Sticking Doors and Drawers 
  With the minor changes in temperature and humidity doors and drawers may swell and be difficult to open or close. Tolerances have been built into the units but extreme conditions may still cause sticking. This will adjust back to normal over time but until it does consider using a dehumidifier or rub candle wax or paraffin on the sides that stick.  
• Avoid Direct Sunlight 
  Keep the furniture out of direct sunlight. Ultraviolet rays will fade colors and in some cases darken them. It can also cause crazing or hair line cracks in the finish. White finishes will yellow naturally over time and exposure to direct sunlight will hasten this natural process along with some woods darkening naturally over time; this is not considered to be a quality defect.  
• Proper Storage 
  If you need to put your furniture in storage for any period of time do not store them in a damp basement or hot dry attic. Allow air movement around the furniture and do not stack anything on it. 

In General 

• Protect furniture surface from hot or extremely cold items. 
• Use coasters under hot or cold beverages 
• Do not use synthetic fabric under accessories or lamps 
• Protect tops from pens, makers and crayons 
• Oils from potpourri and other scented items can damage the furniture finish. 
• Do not drag items across the surface of the furniture.  
• Allow the surface to breath by rotating your accessories and lamps.  
• Do not over polish the furniture, do it only two or three times a year. Over polishing can distort the natural finish of the product.  
• Do not wax the furniture as wax build up can destroy the natural finish of the product.  When moving furniture always lift the unit. Do not push or drag it to avoid damage to legs Keep the furniture level so doors and drawers open and close freely.  
• Clean with a damp, not wet, cloth. Use only a mild soap. Do not use abrasive cleaners. 

ASSEMBLY INSTRUCTIONS

• FAILURE TO FOLLOW THESE WARNINGS AND ASSEMBLY INSTRUCTIONS COULD RESULT IN SERIOUS INJURY OR DEATH.
• READ ALL INSTRUCTIONS BEFORE ASSEMBLING CRIB.  KEEP INSTRUCTIONS FOR FUTURE USE.
• UPON COMPLETION OF ASSEMBLY BE SURE ALL SCREWS, BOLTS AND FASTENING DEVICES HAVE BEEN SECURELY TIGHTENED. A FREQUENT CHECK SHOULD BE MADE.
• BEFORE EACH USAGE OR ASSEMBLY, INSPECT CRIB FOR DAMAGED HARDWARE, LOOSE JOINTS, MISSING OR BROKEN PARTS AND SHARP EDGES. DO NOT USE THIS CRIB IF ANY PARTS ARE MISSING OR BROKEN. ASK YOUR DEALER OR 
• WRITE TO LAJOBI INDUSTRIES, INC, 257 PROSPECT PLAINS ROAD, CRANBURY, NJ 08512. FOR REPLACEMENT PARTS AND INSTRUCTIONAL LITERATURE IF NEEDED. DO NOT SUBSTITUTE PARTS OF ANY KIND.
• AFTER RAISING SIDE, MAKE SURE LATCHES ARE SECURE. WHEN THE CHILD IS ABLE TO CLIMB OUT OR REACHES THE HEIGHT OF 35 INCHES (90 CENTIMETERS), THE CRIB SHALL NO LONGER BE USED. THE CHILD SHOULD BE PLACED IN A 
• YOUTH BED OR TODDLER BED.DO NOT
• DO NOT LEAVE CHILD IN CRIB WHEN SIDE IS LOWERED. BE SURE SIDE IS IN RAISED
• AND LOCKED POSITION WHENEVER CHILD IS IN CRIB.PLACE CRIB NEAR WINDOW WHERE CORDS FROM BLINDS OR DRAPES MAY STRANGLE A CHILD.
• IF REFINISHING, USE A NON-TOXIC FINISH SPECIFIED FOR CHILDREN’S PRODUCTS.
• WHEN CHILD IS ABLE TO PULL TO STANDING POSITION, SET MATTRESS TO LOWEST POSITION AND REMOVE BUMPER PADS, LARGE TOYS AND OTHER OBJECTS THATCOULD SERVE AS STEPS FOR CLIMBING OUT.
• NEVER USE PLASTIC SHIPPING BAGS OR ANY PLASTIC FILM AS MATTRESS COVERS, BECAUSE THEY CAN CAUSE SUFFOCATION. 
• ANY MATTRESS USED IN THIS CRIB MUST BE AT LEAST 27-1/4 INCHES (69 CENTIMETERS) BY 51-5/8 INCHES (131 CENTIMETERS), WITH A THICKNESS NOT EXCEEDING 6 INCHES (15 CENTIMETERS), THE DIMENSIONS OF THE MATTRESS SHALL BE TAKEN FROM SEAM TO SEAM OR EDGE TO EDGE WHERE APPROPRIATE.
• DO NOT USE A WATER MATTRESS WITH THIS CRIB.
• WARNING. STRINGS CAUSE STRANGULATION! DO NOT PLACE ITEMS WITH A STRING AROUND A CHILD’S NECK, SUCH AS HOOD STRINGS OR PACIFIER CORDS. DO NOT SUSPEND STRINGS OVER A CRIB OR ATTACH STRINGS TO TOYS.
• WHEN STORING CRIB USE CAUTION AS EXTREME CHANGES IN TEMPERATURE OR HUMIDITY CAN COMPROMISE THE CRIB MAKING IT EXTREMELY DANGEROUS TO YOUR CHILD.
• USE CAUTION WHEN A VAPORIZER OR HUMIDIFIER IS IN USE. ALWAYS AIM VAPOR AWAY FROM THE CRIB AS WELL AS ANY OTHER WOODEN FURNITURE. PROLONGED PERIODS OF HUMIDITY IN STORAGE AS WELL AS THE HOME CAN COMPROMISE THE CRIB.
• AVOID USING VAPORIZERS AND HUMIDIFIERS FOR PROLONGED PERIODS OF TIME.

Crib Assembly

1. Attach the back rail legs(H)  to the Back Rail Bottom (G) using wood dowels(R) & 3 1/4” Bolts(L) & Barrel Nuts(P)

   

2. Attach the Back Rail Middle(F) to the back rail  using wood dowels (R), then insert   3 1/4” bolts(L) ,through the back rail legs into the threaded insets onto the back rail middle 

   

3. Attach the Back Rail Top(E) to the back rail  using wood dowels (R)

   

4. Use the wooden connecting blocks(I) and wood screws(U) to tightly affix the Back Rail Top to the back rail 

   

5. Attach the Front leg(C) to the crib end bottom(B) rail  using wood dowels (R) and Bolts(L) & Barrel nuts(P) Repeat on the other end.

   

6. Attach the Crib End Top(A) to the Crib end  using wood dowels (R), then insert bolts(N), through the top rail of crib ends bottom into the threaded insets onto the crib end top Repeat on the other end.

   

7. Attach crib ends to the Back Rail  using wood dowels(R) & bolts(L) & barrel nuts(P). Then attach the bottom stretcher(J) to the crib ends using wood dowels (R) &  bolts (N) & barrel nuts(P)

   

8. Locate the metal spring (K) with tabs. Be sure the smooth side of metal spring is paced upward.Position the tabs of metal spring to mount to the selected position onto the legs. Insert the 3/4” bolts(O), through the tabs and into thread insets onto the legs,then tighten securely with Allen wrench(Q)  

   

9. Attach the Dropside Rail (D) to cribs ends pull  the drop rail up to the highest position. Screw the (2) block brakes (T) into the holes provided in the lower  plastic drop track tighten block brakes with a Philips screwdriver. Insert the foot casters (S) and tighten all bolts.Inspect the crib to make sure it is assembled correctly and all bolts are tight.

   

10. Model shown is  example only. Styles may vary.

    

    • To lower the drop side
      Lift by holding the top of the rail in the center.Lift until the drop-side reaches it’s hightest point. Using your shin or knee, press the bottom center of dropside inward, then lower it.
    • To raise the dropside
      Lift the dropside in the center when the dropside is at it’s hightest point,lower it a little and it will lock into place. Always verify that both ends of the dropside are locked in the raised position whenever a child is placed in the crib. Only lower the side when removing the child from the crib.

Converting Crib to a Toddler/Day Bed

You have the option to convert crib to a toddler/day bed. Simply follow step 9 in reverse order and unscrew the block brake and remove the dropside. See the figure 11A. 
WARNING

• Failure to follow these warnings and assembly instructions could result in serious injury or death from entrapment or strangulation.
• DO NOT place bed near windows where cords from blinds or drapes may strangle a child.
• The mattress intended for use on the bed shall be a full-size crib mattress having the dimensions of 51 5/8 in. (1310mm) in length and 27 1/4 in. (690mm) in width and thickness of 4 in. (100mm) or a greaterthickness as specified by the manufacturer.
• The minimum age of the intended user shall not be less than 15 months and the maximum weight shall not be greater than 50 Lbs. (22.7Kg).

Converting Crib to a Full Size Bed

You have the option to convert crib to a full size bed. Simply follow step 9 & 8 & 7 in reverse order to disattach crib to get the headboard as shown in figure 12, attach it to a full size metal bed frame( NOT INCLUDED) to convert a full size bed

Troubleshooting

If you are having trouble assembling the Graco 5-in-1 Convertible Baby Crib, be sure to read the provided instructions carefully and double-check that you have all the necessary hardware. If you are still having trouble, contact Graco's customer service department for assistance. It is also important to note that the crib should be assembled on a firm, level surface to ensure stability and safety. Be sure to follow all safety guidelines and instructions provided by Graco to ensure proper use of the crib.

Pros & Cons of 5-in-1 Convertible Baby Crib

Pros

• Versatile: can be used as a traditional crib, toddler bed, daybed, and full-size bed
• Adjustable mattress height positions
• Meets all safety standards set by the ASTM and CPSC
• Modern and stylish design
• Easy to assemble

Cons

• Additional conversion kits are required to convert the crib to a toddler bed, daybed, and full-size bed
• Weight limit of 50 pounds may be lower than some other cribs on the market

Customer Reviews of Graco 5-in-1 Convertible Baby Crib

Customers love the Convertible Baby Crib for its versatility, adjustable mattress height positions, and modern design. Many reviewers appreciate the crib's ability to grow with their child, and note that it is easy to assemble. Some reviewers mention that the weight limit of 50 pounds is lower than they would like, but overall the crib receives high marks for its quality and value.

Most Common Complaints

The most common complaint about the Graco Baby Crib is that the conversion kits are expensive and not included with the initial purchase. Some reviewers also mention that the crib is a bit heavy and difficult to move once it is assembled. However, these complaints are relatively rare, and most reviewers are very happy with their purchase.